[PATCH 24/32] staging: comedi: pcl711: fix 8254 timer programming

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".

Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.

For aesthetics, factor the timer programming out as a separate
function.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/pcl711.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index 7c03a5d..2da6fec 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -360,6 +360,18 @@ static int pcl711_ai_cmdtest(struct comedi_device *dev,
 	return 0;
 }
 
+static void pcl711_ai_load_counters(struct comedi_device *dev)
+{
+	struct pcl711_private *devpriv = dev->private;
+	unsigned long timer_base = dev->iobase + PCL711_TIMER_BASE;
+
+	i8254_set_mode(timer_base, 0, 1, I8254_MODE2 | I8254_BINARY);
+	i8254_set_mode(timer_base, 0, 2, I8254_MODE2 | I8254_BINARY);
+
+	i8254_write(timer_base, 0, 1, devpriv->divisor1);
+	i8254_write(timer_base, 0, 2, devpriv->divisor2);
+}
+
 static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct pcl711_private *devpriv = dev->private;
@@ -378,13 +390,8 @@ static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	}
 
 	if (cmd->scan_begin_src == TRIG_TIMER) {
-		i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
-			   1, devpriv->divisor1, I8254_MODE2 | I8254_BINARY);
-		i8254_load(dev->iobase + PCL711_TIMER_BASE, 0,
-			   2, devpriv->divisor2, I8254_MODE2 | I8254_BINARY);
-
+		pcl711_ai_load_counters(dev);
 		outb(PCL711_INT_STAT_CLR, dev->iobase + PCL711_INT_STAT_REG);
-
 		pcl711_ai_set_mode(dev, PCL711_MODE_PACER_IRQ);
 	} else {
 		pcl711_ai_set_mode(dev, PCL711_MODE_EXT_IRQ);
-- 
1.9.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux