Step 5 of the (*do_cmdtest) validates that the cmd->chanlist is compatible
with the hardware.
For aesthetics, factor out the step 5 code for the analog input async command
support. Tidy up the factored out code.
To minimize the noise, change the comedi_error(), which is a wrapper around
dev_err(), to dev_dbg().
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/das1800.c | 37 ++++++++++++++++++++------------
1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 8e975d6..d581029 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -757,6 +757,26 @@ static unsigned int burst_convert_arg(unsigned int convert_arg, int round_mode)
return micro_sec * 1000;
}
+static int das1800_ai_check_chanlist(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
+{
+ unsigned int unipolar0 = CR_RANGE(cmd->chanlist[0]) & UNIPOLAR;
+ int i;
+
+ for (i = 1; i < cmd->chanlist_len; i++) {
+ unsigned int unipolar = CR_RANGE(cmd->chanlist[i]) & UNIPOLAR;
+
+ if (unipolar != unipolar0) {
+ dev_dbg(dev->class_dev,
+ "unipolar and bipolar ranges cannot be mixed in the chanlist\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/* test analog input cmd */
static int das1800_ai_do_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -766,8 +786,6 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
struct das1800_private *devpriv = dev->private;
int err = 0;
unsigned int tmp_arg;
- int i;
- int unipolar;
/* Step 1 : check if triggers are trivially valid */
@@ -873,18 +891,9 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
if (err)
return 4;
- /* make sure user is not trying to mix unipolar and bipolar ranges */
- if (cmd->chanlist) {
- unipolar = CR_RANGE(cmd->chanlist[0]) & UNIPOLAR;
- for (i = 1; i < cmd->chanlist_len; i++) {
- if (unipolar != (CR_RANGE(cmd->chanlist[i]) & UNIPOLAR)) {
- comedi_error(dev,
- "unipolar and bipolar ranges cannot be mixed in the chanlist");
- err++;
- break;
- }
- }
- }
+ /* Step 5: check channel list if it exists */
+ if (cmd->chanlist && cmd->chanlist_len > 0)
+ err |= das1800_ai_check_chanlist(dev, s, cmd);
if (err)
return 5;
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
