Step 5 of the (*do_cmdtest) validates that the chanlist, chan/range/aref/etc,
is compatible with the actual hardware. At this point in the (*do_cmdtest)
the chanlist is valid, due to checks in the core, so the sanity check is not
needed.
For aesthetics, factor the step 5 code into a helper function. Tidy up the
factored out code.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/das800.c | 51 +++++++++++++++++++--------------
1 file changed, 30 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index ef5f65f..14420e0 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -300,6 +300,33 @@ static int das800_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
return 0;
}
+static int das800_ai_check_chanlist(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_cmd *cmd)
+{
+ unsigned int chan0 = CR_CHAN(cmd->chanlist[0]);
+ unsigned int range0 = CR_RANGE(cmd->chanlist[0]);
+ int i;
+
+ for (i = 1; i < cmd->chanlist_len; i++) {
+ unsigned int chan = CR_CHAN(cmd->chanlist[i]);
+ unsigned int range = CR_RANGE(cmd->chanlist[i]);
+
+ if (chan != (chan0 + i) % s->n_chan) {
+ dev_err(dev->class_dev,
+ "chanlist must be consecutive, counting upwards\n");
+ return -EINVAL;
+ }
+
+ if (range != range0) {
+ dev_err(dev->class_dev,
+ "chanlist must all have the same range\n");
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
static int das800_ai_do_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_cmd *cmd)
@@ -365,27 +392,9 @@ static int das800_ai_do_cmdtest(struct comedi_device *dev,
if (err)
return 4;
- /* check channel/gain list against card's limitations */
- if (cmd->chanlist) {
- unsigned int chan = CR_CHAN(cmd->chanlist[0]);
- unsigned int range = CR_RANGE(cmd->chanlist[0]);
- unsigned int next;
- int i;
-
- for (i = 1; i < cmd->chanlist_len; i++) {
- next = cmd->chanlist[i];
- if (CR_CHAN(next) != (chan + i) % N_CHAN_AI) {
- dev_err(dev->class_dev,
- "chanlist must be consecutive, counting upwards\n");
- err++;
- }
- if (CR_RANGE(next) != range) {
- dev_err(dev->class_dev,
- "chanlist must all have the same gain\n");
- err++;
- }
- }
- }
+ /* Step 5: check channel list */
+
+ err |= das800_ai_check_chanlist(dev, s, cmd);
if (err)
return 5;
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
