We can remove this function from the boardinfo and move the code from
hwdrv_apci1564.c into addi_apci_1564.c since it is the only reset function
used by the driver. The function was also messy and failed to reset a few
registers, these issues were fixed on the move.
Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
Cc: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
---
Hartley,
Could you take a look at the fixes I have done to this reset function?
The old version was awfully disorganized and seemingly didn't clear all
of the required registers, and I believe that it is better now. But, as I
can only compile test, I'd appreciate it if you could make sure the function
works as intended now. Thanks, Chase.
.../comedi/drivers/addi-data/hwdrv_apci1564.c | 28 ---------------
drivers/staging/comedi/drivers/addi_apci_1564.c | 41 +++++++++++++++++++++-
2 files changed, 40 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
index 4db3bea..45617cf 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci1564.c
@@ -576,31 +576,3 @@ static void apci1564_interrupt(int irq, void *d)
}
return;
}
-
-static int apci1564_reset(struct comedi_device *dev)
-{
- struct addi_private *devpriv = dev->private;
-
- /* disable the interrupts */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
- /* Reset the interrupt status register */
- inl(devpriv->i_IobaseAmcc + APCI1564_DI_INT_STATUS_REG);
- /* Disable the and/or interrupt */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE1_REG);
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
- devpriv->b_DigitalOutputRegister = 0;
- ui_Type = 0;
- /* Resets the output channels */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_REG);
- /* Disables the interrupt. */
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_INT_CTRL_REG);
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_WDOG_RELOAD_REG);
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER_REG);
- outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER_CTRL_REG);
-
- outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1));
- outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2));
- outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3));
- outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4));
- return 0;
-}
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 11aa0bd..c1b2260 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -4,6 +4,7 @@
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
+#include "addi_watchdog.h"
#include "addi-data/addi_common.h"
@@ -22,7 +23,6 @@ static const struct addi_board apci1564_boardtypes[] = {
.i_DoMaxdata = 0xffffffff,
.i_Timer = 1,
.interrupt = apci1564_interrupt,
- .reset = apci1564_reset,
.di_config = apci1564_di_config,
.di_bits = apci1564_di_insn_bits,
.do_config = apci1564_do_config,
@@ -34,6 +34,45 @@ static const struct addi_board apci1564_boardtypes[] = {
},
};
+static int apci1564_reset(struct comedi_device *dev)
+{
+ struct addi_private *devpriv = dev->private;
+
+ ui_Type = 0;
+
+ /* Disable the input interrupts and reset status register */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE1_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_INT_MODE2_REG);
+ inl(devpriv->i_IobaseAmcc + APCI1564_DI_INT_STATUS_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DI_IRQ_REG);
+
+ /* Reset the output channels and disable interrupts */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_INT_CTRL_REG);
+ inl(devpriv->i_IobaseAmcc + APCI1564_DO_INT_STATUS_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_DO_IRQ_REG);
+
+ /* Reset the watchdog registers */
+ addi_watchdog_reset(devpriv->i_IobaseAmcc + APCI1564_WDOG_REG);
+
+ /* Reset the timer registers */
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER_RELOAD_REG);
+ outl(0x0, devpriv->i_IobaseAmcc + APCI1564_TIMER_CTRL_REG);
+
+ /* Reset the counter registers */
+ outl(0x0, dev->iobase + APCI1564_TCW_RELOAD_REG(APCI1564_COUNTER1));
+ outl(0x0, dev->iobase + APCI1564_TCW_RELOAD_REG(APCI1564_COUNTER1));
+ outl(0x0, dev->iobase + APCI1564_TCW_RELOAD_REG(APCI1564_COUNTER1));
+ outl(0x0, dev->iobase + APCI1564_TCW_RELOAD_REG(APCI1564_COUNTER1));
+
+ outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER1));
+ outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER2));
+ outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER3));
+ outl(0x0, dev->iobase + APCI1564_TCW_CTRL_REG(APCI1564_COUNTER4));
+
+ return 0;
+}
+
static int apci1564_auto_attach(struct comedi_device *dev,
unsigned long context)
{
--
1.9.0
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
