[PATCH 18/31] staging: comedi: dt282x: use cfc_handle_events()

[H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>]

Use the comedi_fc helper function to automatically call the subdevice
(*cancel) function when needed and call comedi_event().

This also fixes two bugs.
  1) the analog input command is canceled due to a buffer overflow
     without sending an event (@@ -341,7 +340,7 @@).
  2) an analog output error causes the command to cancel but the event
     is reported to the analog input subdevice (@@ -449,15 +447,13 @@).

In the Kconfig, COMEDI_DT282X already selects COMEDI_FC.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/dt282x.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 6cc8f1d..16cc100 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -306,7 +306,6 @@ static void dt282x_ao_dma_interrupt(struct comedi_device *dev)
 	size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize);
 	if (size == 0) {
 		dev_err(dev->class_dev, "AO underrun\n");
-		dt282x_ao_cancel(dev, s);
 		s->async->events |= COMEDI_CB_OVERFLOW;
 		return;
 	}
@@ -341,7 +340,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
 	dt282x_munge(dev, ptr, size);
 	ret = cfc_write_array_to_buffer(s, ptr, size);
 	if (ret != size) {
-		dt282x_ai_cancel(dev, s);
+		s->async->events |= COMEDI_CB_OVERFLOW;
 		return;
 	}
 	devpriv->nread -= size / 2;
@@ -351,7 +350,6 @@ static void dt282x_ai_dma_interrupt(struct comedi_device *dev)
 		devpriv->nread = 0;
 	}
 	if (!devpriv->nread) {
-		dt282x_ai_cancel(dev, s);
 		s->async->events |= COMEDI_CB_EOA;
 		return;
 	}
@@ -449,15 +447,13 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
 	if (adcsr & DT2821_ADERR) {
 		if (devpriv->nread != 0) {
 			comedi_error(dev, "A/D error");
-			dt282x_ai_cancel(dev, s);
 			s->async->events |= COMEDI_CB_ERROR;
 		}
 		handled = 1;
 	}
 	if (dacsr & DT2821_DAERR) {
 		comedi_error(dev, "D/A error");
-		dt282x_ao_cancel(dev, s_ao);
-		s->async->events |= COMEDI_CB_ERROR;
+		s_ao->async->events |= COMEDI_CB_ERROR;
 		handled = 1;
 	}
 #if 0
@@ -486,7 +482,8 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
 		handled = 1;
 	}
 #endif
-	comedi_event(dev, s);
+	cfc_handle_events(dev, s);
+	cfc_handle_events(dev, s_ao);
 
 	return IRQ_RETVAL(handled);
 }
-- 
1.8.5.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel