Move this function to remove the need for the forward declaration. Rename it
so it has namespace associated with the driver. Remove the unnecessary
comedi_subdevice parameter from the function.
The hardware has per-channel programmable gain. This function first sets the
range for each channel then sets the mux register to automatically scan the
channels.
Remove the need for the 'ai_act_chanlist' member in the private data. It is
only used to set the first/last channel to scan.
Introduce a couple helper functions to set the range for a channel and to set
the first/last channels to scan.
Tidy up the range and mux register defines.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/pcl816.c | 83 ++++++++++++++++++---------------
1 file changed, 45 insertions(+), 38 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 720ef93..8065df2 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -49,6 +49,9 @@ Configuration Options:
#define PCL816_TIMER_BASE 0x04
#define PCL816_AI_LSB_REG 0x08
#define PCL816_AI_MSB_REG 0x09
+#define PCL816_RANGE_REG 0x09
+#define PCL816_MUX_REG 0x0b
+#define PCL816_MUX_SCAN(_first, _last) (((_last) << 4) | (_first))
#define PCL816_STATUS_REG 0x0d
#define PCL816_STATUS_NEXT_CHAN_MASK (0xf << 0)
#define PCL816_STATUS_INTSRC_MASK (3 << 4)
@@ -59,12 +62,8 @@ Configuration Options:
#define PCL816_STATUS_INTACT (1 << 6)
#define PCL816_STATUS_DRDY (1 << 7)
-/* R: A/D high byte W: A/D range control */
-#define PCL816_RANGE 9
/* W: clear INT request */
#define PCL816_CLRINT 10
-/* R: next mux scan channel W: mux scan channel & range control pointer */
-#define PCL816_MUX 11
/* R/W: operation control register */
#define PCL816_CONTROL 12
@@ -115,7 +114,6 @@ struct pcl816_private {
long dma_runs_to_end; /* how many we must permorm DMA transfer to end of record */
unsigned long last_dma_run; /* how many bytes we must transfer on last DMA page */
int ai_act_scan; /* how many scans we finished */
- unsigned int ai_act_chanlist[16]; /* MUX setting for actual AI operations */
unsigned int ai_poll_ptr; /* how many sampes transfer poll */
unsigned int divisor1;
unsigned int divisor2;
@@ -126,9 +124,6 @@ struct pcl816_private {
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int *chanlist, unsigned int chanlen);
-static void setup_channel_list(struct comedi_device *dev,
- struct comedi_subdevice *s,
- unsigned int *chanlist, unsigned int seglen);
static void pcl816_start_pacer(struct comedi_device *dev, bool load_counters)
{
@@ -211,6 +206,44 @@ static void pcl816_ai_setup_next_dma(struct comedi_device *dev,
devpriv->dma_runs_to_end--;
}
+static void pcl816_ai_set_chan_range(struct comedi_device *dev,
+ unsigned int chan,
+ unsigned int range)
+{
+ outb(chan, dev->iobase + PCL816_MUX_REG);
+ outb(range, dev->iobase + PCL816_RANGE_REG);
+}
+
+static void pcl816_ai_set_chan_scan(struct comedi_device *dev,
+ unsigned int first_chan,
+ unsigned int last_chan)
+{
+ outb(PCL816_MUX_SCAN(first_chan, last_chan),
+ dev->iobase + PCL816_MUX_REG);
+}
+
+static void pcl816_ai_setup_chanlist(struct comedi_device *dev,
+ unsigned int *chanlist,
+ unsigned int seglen)
+{
+ unsigned int first_chan = CR_CHAN(chanlist[0]);
+ unsigned int last_chan;
+ unsigned int range;
+ unsigned int i;
+
+ /* store range list to card */
+ for (i = 0; i < seglen; i++) {
+ last_chan = CR_CHAN(chanlist[i]);
+ range = CR_RANGE(chanlist[i]);
+
+ pcl816_ai_set_chan_range(dev, last_chan, range);
+ }
+
+ udelay(1);
+
+ pcl816_ai_set_chan_scan(dev, first_chan, last_chan);
+}
+
static void pcl816_ai_clear_eoc(struct comedi_device *dev)
{
/* writing any value clears the interrupt request */
@@ -444,7 +477,7 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
seglen = check_channel_list(dev, s, cmd->chanlist, cmd->chanlist_len);
if (seglen < 1)
return -EINVAL;
- setup_channel_list(dev, s, cmd->chanlist, seglen);
+ pcl816_ai_setup_chanlist(dev, cmd->chanlist, seglen);
udelay(1);
devpriv->ai_act_scan = 0;
@@ -615,28 +648,6 @@ check_channel_list(struct comedi_device *dev,
return seglen; /* we can serve this with MUX logic */
}
-static void
-setup_channel_list(struct comedi_device *dev,
- struct comedi_subdevice *s, unsigned int *chanlist,
- unsigned int seglen)
-{
- struct pcl816_private *devpriv = dev->private;
- unsigned int i;
-
- for (i = 0; i < seglen; i++) { /* store range list to card */
- devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
- outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
- /* select gain */
- outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE);
- }
-
- udelay(1);
- /* select channel interval to scan */
- outb(devpriv->ai_act_chanlist[0] |
- (devpriv->ai_act_chanlist[seglen - 1] << 4),
- dev->iobase + PCL816_MUX);
-}
-
static int pcl816_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
@@ -650,10 +661,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
/* software trigger, DMA and INT off */
outb(0, dev->iobase + PCL816_CONTROL);
- /* Set the input channel */
- outb(chan, dev->iobase + PCL816_MUX);
- /* select gain */
- outb(range, dev->iobase + PCL816_RANGE);
+ pcl816_ai_set_chan_range(dev, chan, range);
+ pcl816_ai_set_chan_scan(dev, chan, chan);
for (i = 0; i < insn->n; i++) {
pcl816_ai_clear_eoc(dev);
@@ -701,7 +710,7 @@ static void pcl816_reset(struct comedi_device *dev)
unsigned long timer_base = dev->iobase + PCL816_TIMER_BASE;
outb(0, dev->iobase + PCL816_CONTROL);
- outb(0, dev->iobase + PCL816_MUX);
+ pcl816_ai_set_chan_range(dev, 0, 0);
pcl816_ai_clear_eoc(dev);
/* Stop pacer */
@@ -709,8 +718,6 @@ static void pcl816_reset(struct comedi_device *dev)
i8254_set_mode(timer_base, 0, 1, I8254_MODE0 | I8254_BINARY);
i8254_set_mode(timer_base, 0, 0, I8254_MODE0 | I8254_BINARY);
- outb(0, dev->iobase + PCL816_RANGE);
-
/* set all digital outputs low */
outb(0, dev->iobase + PCL816_DO_DI_LSB_REG);
outb(0, dev->iobase + PCL816_DO_DI_MSB_REG);
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
