For aesthetics, move this function to follow the pcl812 and pcl818 drivers
better.
Remove the commented out cut-and-paste code from the pcl818 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/pcl816.c | 43 +++++++++++++++------------------
1 file changed, 20 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 20da00d..4ec0b1e 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -581,29 +581,6 @@ static int pcl816_ai_cancel(struct comedi_device *dev,
return 0;
}
-static void pcl816_reset(struct comedi_device *dev)
-{
- unsigned long timer_base = dev->iobase + PCL816_TIMER_BASE;
-
-/* outb (0, dev->iobase + PCL818_DA_LO); DAC=0V */
-/* outb (0, dev->iobase + PCL818_DA_HI); */
-/* udelay (1); */
- outb(0, dev->iobase + PCL816_CONTROL);
- outb(0, dev->iobase + PCL816_MUX);
- outb(0, dev->iobase + PCL816_CLRINT);
-
- /* Stop pacer */
- i8254_set_mode(timer_base, 0, 2, I8254_MODE0 | I8254_BINARY);
- i8254_set_mode(timer_base, 0, 1, I8254_MODE0 | I8254_BINARY);
- i8254_set_mode(timer_base, 0, 0, I8254_MODE0 | I8254_BINARY);
-
- outb(0, dev->iobase + PCL816_RANGE);
-
- /* set all digital outputs low */
- outb(0, dev->iobase + PCL816_DO_DI_LSB_REG);
- outb(0, dev->iobase + PCL816_DO_DI_MSB_REG);
-}
-
static int
check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s, unsigned int *chanlist,
@@ -708,6 +685,26 @@ static int pcl816_do_insn_bits(struct comedi_device *dev,
return insn->n;
}
+static void pcl816_reset(struct comedi_device *dev)
+{
+ unsigned long timer_base = dev->iobase + PCL816_TIMER_BASE;
+
+ outb(0, dev->iobase + PCL816_CONTROL);
+ outb(0, dev->iobase + PCL816_MUX);
+ outb(0, dev->iobase + PCL816_CLRINT);
+
+ /* Stop pacer */
+ i8254_set_mode(timer_base, 0, 2, I8254_MODE0 | I8254_BINARY);
+ i8254_set_mode(timer_base, 0, 1, I8254_MODE0 | I8254_BINARY);
+ i8254_set_mode(timer_base, 0, 0, I8254_MODE0 | I8254_BINARY);
+
+ outb(0, dev->iobase + PCL816_RANGE);
+
+ /* set all digital outputs low */
+ outb(0, dev->iobase + PCL816_DO_DI_LSB_REG);
+ outb(0, dev->iobase + PCL816_DO_DI_MSB_REG);
+}
+
static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct pcl816_board *board = comedi_board(dev);
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
