If an async ai command is not running or the int816_mode is 0 the
interrupt routine doesn't do anything other than spew some noise and
clear the interrupt request in the hardware.
Because this driver is manually attached, the "premature interrupt"
check in the interrupt handler should never happen. The interrupt is
only hooked up during the attach and it's released during the detach.
Combine these checks so that the interrupt function exits quick if it
has nothing to handle. Remove the noise.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/pcl816.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index ebcaff8..fdf3335 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -371,8 +371,8 @@ static irqreturn_t interrupt_pcl816(int irq, void *d)
struct comedi_device *dev = d;
struct pcl816_private *devpriv = dev->private;
- if (!dev->attached) {
- comedi_error(dev, "premature interrupt");
+ if (!dev->attached || !devpriv->ai_cmd_running ||
+ !devpriv->int816_mode) {
outb(0, dev->iobase + PCL816_CLRINT);
return IRQ_HANDLED;
}
@@ -392,13 +392,8 @@ static irqreturn_t interrupt_pcl816(int irq, void *d)
return interrupt_pcl816_ai_mode13_int(irq, d);
}
- outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
- if (!devpriv->ai_cmd_running || !devpriv->int816_mode) {
- comedi_error(dev, "bad IRQ!");
- return IRQ_NONE;
- }
- comedi_error(dev, "IRQ from unknown source!");
- return IRQ_NONE;
+ outb(0, dev->iobase + PCL816_CLRINT);
+ return IRQ_HANDLED;
}
static int pcl816_ai_cmdtest(struct comedi_device *dev,
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
