clean up checkpatch.pl warnings:
WARNING: please no spaces at the start of a line in
Signed-off-by: Daeseok Youn <daeseok.youn@xxxxxxxxx>
---
drivers/staging/cxt1e1/hwprobe.c | 585 +++++++++++++++++++-------------------
1 file changed, 293 insertions(+), 292 deletions(-)
diff --git a/drivers/staging/cxt1e1/hwprobe.c b/drivers/staging/cxt1e1/hwprobe.c
index 5e93580..85040bb 100644
--- a/drivers/staging/cxt1e1/hwprobe.c
+++ b/drivers/staging/cxt1e1/hwprobe.c
@@ -43,347 +43,348 @@ struct net_device * __init c4_add_dev(hdw_info_t *, int, unsigned long, unsigned
struct s_hdw_info hdw_info[MAX_BOARDS];
-void __init
+void __init
show_two(hdw_info_t *hi, int brdno)
{
- ci_t *ci;
- struct pci_dev *pdev;
- char *bid;
- char banner[80];
- char sn[6];
-
- memset(banner, 0, 80); /* clear print buffer */
-
- ci = (ci_t *)(netdev_priv(hi->ndev));
- bid = sbeid_get_bdname(ci);
- switch (hi->promfmt)
- {
- case PROM_FORMAT_TYPE1:
- memcpy(sn, (FLD_TYPE1 *)(hi->mfg_info.pft1.Serial), 6);
- break;
- case PROM_FORMAT_TYPE2:
- memcpy(sn, (FLD_TYPE2 *)(hi->mfg_info.pft2.Serial), 6);
- break;
- default:
- memset(sn, 0, 6);
- break;
- }
-
- sprintf(banner, "%s: %s S/N %06X, MUSYCC Rev %02X",
- hi->devname, bid,
- ((sn[3] << 16) & 0xff0000) |
- ((sn[4] << 8) & 0x00ff00) |
- (sn[5] & 0x0000ff),
- (u_int8_t) hi->revid[0]);
-
- pr_info("%s\n", banner);
-
- pdev = hi->pdev[0];
- pr_info("%s: %s at v/p=%lx/%lx (%02x:%02x.%x) irq %d\n",
- hi->devname, "MUSYCC",
- (unsigned long) hi->addr_mapped[0], hi->addr[0],
- hi->pci_busno, (u_int8_t)PCI_SLOT(pdev->devfn),
- (u_int8_t)PCI_FUNC(pdev->devfn), pdev->irq);
-
- pdev = hi->pdev[1];
- pr_info("%s: %s at v/p=%lx/%lx (%02x:%02x.%x) irq %d\n",
- hi->devname, "EBUS ",
- (unsigned long) hi->addr_mapped[1], hi->addr[1],
- hi->pci_busno, (u_int8_t)PCI_SLOT(pdev->devfn),
- (u_int8_t)PCI_FUNC(pdev->devfn), pdev->irq);
+ ci_t *ci;
+ struct pci_dev *pdev;
+ char *bid;
+ char banner[80];
+ char sn[6];
+
+ /* clear print buffer */
+ memset(banner, 0, 80);
+
+ ci = (ci_t *)(netdev_priv(hi->ndev));
+ bid = sbeid_get_bdname(ci);
+ switch (hi->promfmt)
+ {
+ case PROM_FORMAT_TYPE1:
+ memcpy(sn, (FLD_TYPE1 *)(hi->mfg_info.pft1.Serial), 6);
+ break;
+ case PROM_FORMAT_TYPE2:
+ memcpy(sn, (FLD_TYPE2 *)(hi->mfg_info.pft2.Serial), 6);
+ break;
+ default:
+ memset(sn, 0, 6);
+ break;
+ }
+
+ sprintf(banner, "%s: %s S/N %06X, MUSYCC Rev %02X",
+ hi->devname, bid,
+ ((sn[3] << 16) & 0xff0000) |
+ ((sn[4] << 8) & 0x00ff00) |
+ (sn[5] & 0x0000ff),
+ (u_int8_t) hi->revid[0]);
+
+ pr_info("%s\n", banner);
+
+ pdev = hi->pdev[0];
+ pr_info("%s: %s at v/p=%lx/%lx (%02x:%02x.%x) irq %d\n",
+ hi->devname, "MUSYCC",
+ (unsigned long) hi->addr_mapped[0], hi->addr[0],
+ hi->pci_busno, (u_int8_t) PCI_SLOT(pdev->devfn),
+ (u_int8_t) PCI_FUNC(pdev->devfn), pdev->irq);
+
+ pdev = hi->pdev[1];
+ pr_info("%s: %s at v/p=%lx/%lx (%02x:%02x.%x) irq %d\n",
+ hi->devname, "EBUS ",
+ (unsigned long) hi->addr_mapped[1], hi->addr[1],
+ hi->pci_busno, (u_int8_t) PCI_SLOT(pdev->devfn),
+ (u_int8_t) PCI_FUNC(pdev->devfn), pdev->irq);
}
-void __init
+void __init
hdw_sn_get(hdw_info_t *hi, int brdno)
{
- /* obtain hardware EEPROM information */
- long addr;
+ /* obtain hardware EEPROM information */
+ long addr;
- addr = (long) hi->addr_mapped[1] + EEPROM_OFFSET;
+ addr = (long) hi->addr_mapped[1] + EEPROM_OFFSET;
- /* read EEPROM with largest known format size... */
- pmc_eeprom_read_buffer(addr, 0, (char *)hi->mfg_info.data, sizeof(FLD_TYPE2));
+ /* read EEPROM with largest known format size... */
+ pmc_eeprom_read_buffer(addr, 0, (char *)hi->mfg_info.data, sizeof(FLD_TYPE2));
#if 0
- {
- unsigned char *ucp = (unsigned char *) &hi->mfg_info.data;
-
- pr_info("eeprom[00]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 0), *(ucp + 1), *(ucp + 2), *(ucp + 3), *(ucp + 4), *(ucp + 5), *(ucp + 6), *(ucp + 7));
- pr_info("eeprom[08]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 8), *(ucp + 9), *(ucp + 10), *(ucp + 11), *(ucp + 12), *(ucp + 13), *(ucp + 14), *(ucp + 15));
- pr_info("eeprom[16]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 16), *(ucp + 17), *(ucp + 18), *(ucp + 19), *(ucp + 20), *(ucp + 21), *(ucp + 22), *(ucp + 23));
- pr_info("eeprom[24]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 24), *(ucp + 25), *(ucp + 26), *(ucp + 27), *(ucp + 28), *(ucp + 29), *(ucp + 30), *(ucp + 31));
- pr_info("eeprom[32]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 32), *(ucp + 33), *(ucp + 34), *(ucp + 35), *(ucp + 36), *(ucp + 37), *(ucp + 38), *(ucp + 39));
- pr_info("eeprom[40]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
- *(ucp + 40), *(ucp + 41), *(ucp + 42), *(ucp + 43), *(ucp + 44), *(ucp + 45), *(ucp + 46), *(ucp + 47));
- }
+ {
+ unsigned char *ucp = (unsigned char *) &hi->mfg_info.data;
+
+ pr_info("eeprom[00]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 0), *(ucp + 1), *(ucp + 2), *(ucp + 3), *(ucp + 4), *(ucp + 5), *(ucp + 6), *(ucp + 7));
+ pr_info("eeprom[08]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 8), *(ucp + 9), *(ucp + 10), *(ucp + 11), *(ucp + 12), *(ucp + 13), *(ucp + 14), *(ucp + 15));
+ pr_info("eeprom[16]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 16), *(ucp + 17), *(ucp + 18), *(ucp + 19), *(ucp + 20), *(ucp + 21), *(ucp + 22), *(ucp + 23));
+ pr_info("eeprom[24]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 24), *(ucp + 25), *(ucp + 26), *(ucp + 27), *(ucp + 28), *(ucp + 29), *(ucp + 30), *(ucp + 31));
+ pr_info("eeprom[32]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 32), *(ucp + 33), *(ucp + 34), *(ucp + 35), *(ucp + 36), *(ucp + 37), *(ucp + 38), *(ucp + 39));
+ pr_info("eeprom[40]: %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ *(ucp + 40), *(ucp + 41), *(ucp + 42), *(ucp + 43), *(ucp + 44), *(ucp + 45), *(ucp + 46), *(ucp + 47));
+ }
#endif
#if 0
- pr_info("sn: %x %x %x %x %x %x\n",
- hi->mfg_info.Serial[0],
- hi->mfg_info.Serial[1],
- hi->mfg_info.Serial[2],
- hi->mfg_info.Serial[3],
- hi->mfg_info.Serial[4],
- hi->mfg_info.Serial[5]);
+ pr_info("sn: %x %x %x %x %x %x\n",
+ hi->mfg_info.Serial[0],
+ hi->mfg_info.Serial[1],
+ hi->mfg_info.Serial[2],
+ hi->mfg_info.Serial[3],
+ hi->mfg_info.Serial[4],
+ hi->mfg_info.Serial[5]);
#endif
- if ((hi->promfmt = pmc_verify_cksum(&hi->mfg_info.data)) == PROM_FORMAT_Unk)
- {
- /* bad crc, data is suspect */
- if (cxt1e1_log_level >= LOG_WARN)
- pr_info("%s: EEPROM cksum error\n", hi->devname);
- hi->mfg_info_sts = EEPROM_CRCERR;
- } else
- hi->mfg_info_sts = EEPROM_OK;
+ if ((hi->promfmt = pmc_verify_cksum(&hi->mfg_info.data)) == PROM_FORMAT_Unk)
+ {
+ /* bad crc, data is suspect */
+ if (cxt1e1_log_level >= LOG_WARN)
+ pr_info("%s: EEPROM cksum error\n", hi->devname);
+ hi->mfg_info_sts = EEPROM_CRCERR;
+ } else
+ hi->mfg_info_sts = EEPROM_OK;
}
-void __init
+ void __init
prep_hdw_info(void)
{
- hdw_info_t *hi;
- int i;
-
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- hi->pci_busno = 0xff;
- hi->pci_slot = 0xff;
- hi->pci_pin[0] = 0;
- hi->pci_pin[1] = 0;
- hi->ndev = NULL;
- hi->addr[0] = 0L;
- hi->addr[1] = 0L;
- hi->addr_mapped[0] = 0L;
- hi->addr_mapped[1] = 0L;
- }
+ hdw_info_t *hi;
+ int i;
+
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ hi->pci_busno = 0xff;
+ hi->pci_slot = 0xff;
+ hi->pci_pin[0] = 0;
+ hi->pci_pin[1] = 0;
+ hi->ndev = NULL;
+ hi->addr[0] = 0L;
+ hi->addr[1] = 0L;
+ hi->addr_mapped[0] = 0L;
+ hi->addr_mapped[1] = 0L;
+ }
}
void
cleanup_ioremap(void)
{
- hdw_info_t *hi;
- int i;
-
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- if (hi->pci_slot == 0xff)
- break;
- if (hi->addr_mapped[0])
- {
- iounmap((void *)(hi->addr_mapped[0]));
- release_mem_region((long) hi->addr[0], hi->len[0]);
- hi->addr_mapped[0] = 0;
- }
- if (hi->addr_mapped[1])
- {
- iounmap((void *)(hi->addr_mapped[1]));
- release_mem_region((long) hi->addr[1], hi->len[1]);
- hi->addr_mapped[1] = 0;
- }
- }
+ hdw_info_t *hi;
+ int i;
+
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ if (hi->pci_slot == 0xff)
+ break;
+ if (hi->addr_mapped[0])
+ {
+ iounmap((void *)(hi->addr_mapped[0]));
+ release_mem_region((long) hi->addr[0], hi->len[0]);
+ hi->addr_mapped[0] = 0;
+ }
+ if (hi->addr_mapped[1])
+ {
+ iounmap((void *)(hi->addr_mapped[1]));
+ release_mem_region((long) hi->addr[1], hi->len[1]);
+ hi->addr_mapped[1] = 0;
+ }
+ }
}
void
cleanup_devs(void)
{
- hdw_info_t *hi;
- int i;
-
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- if (hi->pci_slot == 0xff || !hi->ndev)
- break;
- c4_stopwd(netdev_priv(hi->ndev));
+ hdw_info_t *hi;
+ int i;
+
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ if (hi->pci_slot == 0xff || !hi->ndev)
+ break;
+ c4_stopwd(netdev_priv(hi->ndev));
#ifdef CONFIG_PROC_FS
- sbecom_proc_brd_cleanup(netdev_priv(hi->ndev));
+ sbecom_proc_brd_cleanup(netdev_priv(hi->ndev));
#endif
- unregister_netdev(hi->ndev);
- free_irq(hi->pdev[0]->irq, hi->ndev);
+ unregister_netdev(hi->ndev);
+ free_irq(hi->pdev[0]->irq, hi->ndev);
#ifdef CONFIG_SBE_PMCC4_NCOMM
- free_irq(hi->pdev[1]->irq, hi->ndev);
+ free_irq(hi->pdev[1]->irq, hi->ndev);
#endif
- OS_kfree(hi->ndev);
- }
+ OS_kfree(hi->ndev);
+ }
}
static int __init
c4_hdw_init(struct pci_dev *pdev, int found)
{
- hdw_info_t *hi;
- int i;
- int fun, slot;
- unsigned char busno = 0xff;
-
- /* our MUSYCC chip supports two functions, 0 & 1 */
- if ((fun = PCI_FUNC(pdev->devfn)) > 1)
- {
- pr_warning("unexpected devfun: 0x%x\n", pdev->devfn);
- return 0;
- }
- if (pdev->bus) /* obtain bus number */
- busno = pdev->bus->number;
- else
- busno = 0; /* default for system PCI inconsistency */
- slot = pdev->devfn & ~0x07;
-
- /*
- * Functions 0 & 1 for a given board (identified by same bus(busno) and
- * slot(slot)) are placed into the same 'hardware' structure. The first
- * part of the board's functionality will be placed into an unpopulated
- * element, identified by "slot==(0xff)". The second part of a board's
- * functionality will match the previously loaded slot/busno.
- */
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- /*
- * match with board's first found interface, otherwise this is first
- * found
- */
- if ((hi->pci_slot == 0xff) || /* new board */
- ((hi->pci_slot == slot) && (hi->bus == pdev->bus)))
- break; /* found for-loop exit */
- }
- if (i == MAX_BOARDS) /* no match in above loop means MAX
- * exceeded */
- {
- pr_warning("exceeded number of allowed devices (>%d)?\n", MAX_BOARDS);
- return 0;
- }
- if (pdev->bus)
- hi->pci_busno = pdev->bus->number;
- else
- hi->pci_busno = 0; /* default for system PCI inconsistency */
- hi->pci_slot = slot;
- pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &hi->pci_pin[fun]);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &hi->revid[fun]);
- hi->bus = pdev->bus;
- hi->addr[fun] = pci_resource_start(pdev, 0);
- hi->len[fun] = pci_resource_end(pdev, 0) - hi->addr[fun] + 1;
- hi->pdev[fun] = pdev;
-
- {
- /*
- * create device name from module name, plus add the appropriate
- * board number
- */
- char *cp = hi->devname;
-
- strcpy(cp, KBUILD_MODNAME);
- cp += strlen(cp); /* reposition */
- *cp++ = '-';
- *cp++ = '0' + (found / 2); /* there are two found interfaces per
- * board */
- *cp = 0; /* termination */
- }
-
- return 1;
+ hdw_info_t *hi;
+ int i;
+ int fun, slot;
+ unsigned char busno = 0xff;
+
+ /* our MUSYCC chip supports two functions, 0 & 1 */
+ if ((fun = PCI_FUNC(pdev->devfn)) > 1)
+ {
+ pr_warning("unexpected devfun: 0x%x\n", pdev->devfn);
+ return 0;
+ }
+
+ if (pdev->bus) /* obtain bus number */
+ busno = pdev->bus->number;
+ else
+ busno = 0; /* default for system PCI inconsistency */
+ slot = pdev->devfn & ~0x07;
+
+ /*
+ * Functions 0 & 1 for a given board (identified by same bus(busno) and
+ * slot(slot)) are placed into the same 'hardware' structure. The first
+ * part of the board's functionality will be placed into an unpopulated
+ * element, identified by "slot==(0xff)". The second part of a board's
+ * functionality will match the previously loaded slot/busno.
+ */
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ /*
+ * match with board's first found interface, otherwise this is first
+ * found
+ */
+ if ((hi->pci_slot == 0xff) || /* new board */
+ ((hi->pci_slot == slot) && (hi->bus == pdev->bus)))
+ break; /* found for-loop exit */
+ }
+ if (i == MAX_BOARDS) /* no match in above loop means MAX
+ * exceeded */
+ {
+ pr_warning("exceeded number of allowed devices (>%d)?\n", MAX_BOARDS);
+ return 0;
+ }
+ if (pdev->bus)
+ hi->pci_busno = pdev->bus->number;
+ else
+ hi->pci_busno = 0; /* default for system PCI inconsistency */
+ hi->pci_slot = slot;
+ pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &hi->pci_pin[fun]);
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hi->revid[fun]);
+ hi->bus = pdev->bus;
+ hi->addr[fun] = pci_resource_start(pdev, 0);
+ hi->len[fun] = pci_resource_end(pdev, 0) - hi->addr[fun] + 1;
+ hi->pdev[fun] = pdev;
+
+ {
+ /*
+ * create device name from module name, plus add the appropriate
+ * board number
+ */
+ char *cp = hi->devname;
+
+ strcpy(cp, KBUILD_MODNAME);
+ cp += strlen(cp); /* reposition */
+ *cp++ = '-';
+ *cp++ = '0' + (found / 2); /* there are two found interfaces per
+ * board */
+ *cp = 0; /* termination */
+ }
+
+ return 1;
}
-
-status_t __init
+status_t __init
c4hw_attach_all(void)
{
- hdw_info_t *hi;
- struct pci_dev *pdev = NULL;
- int found = 0, i, j;
-
- error_flag = 0;
- prep_hdw_info();
- /*** scan PCI bus for all possible boards */
- while ((pdev = pci_get_device(PCI_VENDOR_ID_CONEXANT,
- PCI_DEVICE_ID_CN8474,
- pdev)))
- {
- if (c4_hdw_init(pdev, found))
- found++;
- }
- if (!found)
- {
- pr_warning("No boards found\n");
- return -ENODEV;
- }
- /* sanity check for consistent hardware found */
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- if (hi->pci_slot != 0xff && (!hi->addr[0] || !hi->addr[1]))
- {
- pr_warning("%s: something very wrong with pci_get_device\n",
- hi->devname);
- return -EIO;
- }
- }
- /* bring board's memory regions on/line */
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- if (hi->pci_slot == 0xff)
- break;
- for (j = 0; j < 2; j++)
- {
- if (!request_mem_region(hi->addr[j], hi->len[j], hi->devname))
- {
- pr_warning("%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
- hi->devname, hi->addr[j], hi->len[j]);
- cleanup_ioremap();
- return -ENOMEM;
- }
- hi->addr_mapped[j] = (unsigned long)ioremap(hi->addr[j], hi->len[j]);
- if (!hi->addr_mapped[j])
- {
- pr_warning("%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
- hi->devname, hi->addr[j], hi->len[j]);
- cleanup_ioremap();
- return -ENOMEM;
- }
+ hdw_info_t *hi;
+ struct pci_dev *pdev = NULL;
+ int found = 0, i, j;
+
+ error_flag = 0;
+ prep_hdw_info();
+ /*** scan PCI bus for all possible boards */
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_CONEXANT,
+ PCI_DEVICE_ID_CN8474,
+ pdev)))
+ {
+ if (c4_hdw_init(pdev, found))
+ found++;
+ }
+ if (!found)
+ {
+ pr_warning("No boards found\n");
+ return -ENODEV;
+ }
+ /* sanity check for consistent hardware found */
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ if (hi->pci_slot != 0xff && (!hi->addr[0] || !hi->addr[1]))
+ {
+ pr_warning("%s: something very wrong with pci_get_device\n",
+ hi->devname);
+ return -EIO;
+ }
+ }
+ /* bring board's memory regions on/line */
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ if (hi->pci_slot == 0xff)
+ break;
+ for (j = 0; j < 2; j++)
+ {
+ if (!request_mem_region(hi->addr[j], hi->len[j], hi->devname))
+ {
+ pr_warning("%s: memory in use, addr=0x%lx, len=0x%lx ?\n",
+ hi->devname, hi->addr[j], hi->len[j]);
+ cleanup_ioremap();
+ return -ENOMEM;
+ }
+ hi->addr_mapped[j] = (unsigned long)ioremap(hi->addr[j], hi->len[j]);
+ if (!hi->addr_mapped[j])
+ {
+ pr_warning("%s: ioremap fails, addr=0x%lx, len=0x%lx ?\n",
+ hi->devname, hi->addr[j], hi->len[j]);
+ cleanup_ioremap();
+ return -ENOMEM;
+ }
#ifdef SBE_MAP_DEBUG
- pr_warning("%s: io remapped from phys %x to virt %x\n",
- hi->devname, (u_int32_t) hi->addr[j], (u_int32_t) hi->addr_mapped[j]);
+ pr_warning("%s: io remapped from phys %x to virt %x\n",
+ hi->devname, (u_int32_t) hi->addr[j], (u_int32_t) hi->addr_mapped[j]);
#endif
- }
- }
-
- drvr_state = SBE_DRVR_AVAILABLE;
-
- /* Have now memory mapped all boards. Now allow board's access to system */
- for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
- {
- if (hi->pci_slot == 0xff)
- break;
- if (pci_enable_device(hi->pdev[0]) ||
- pci_enable_device(hi->pdev[1]))
- {
- drvr_state = SBE_DRVR_DOWN;
- pr_warning("%s: failed to enable card %d slot %d\n",
- hi->devname, i, hi->pci_slot);
- cleanup_devs();
- cleanup_ioremap();
- return -EIO;
- }
- pci_set_master(hi->pdev[0]);
- pci_set_master(hi->pdev[1]);
- if (!(hi->ndev = c4_add_dev(hi, i, (long) hi->addr_mapped[0],
- (long) hi->addr_mapped[1],
- hi->pdev[0]->irq,
- hi->pdev[1]->irq)))
- {
- drvr_state = SBE_DRVR_DOWN;
- cleanup_ioremap();
- /* NOTE: c4_add_dev() does its own device cleanup */
+ }
+ }
+
+ drvr_state = SBE_DRVR_AVAILABLE;
+
+ /* Have now memory mapped all boards. Now allow board's access to system */
+ for (i = 0, hi = hdw_info; i < MAX_BOARDS; i++, hi++)
+ {
+ if (hi->pci_slot == 0xff)
+ break;
+ if (pci_enable_device(hi->pdev[0]) ||
+ pci_enable_device(hi->pdev[1]))
+ {
+ drvr_state = SBE_DRVR_DOWN;
+ pr_warning("%s: failed to enable card %d slot %d\n",
+ hi->devname, i, hi->pci_slot);
+ cleanup_devs();
+ cleanup_ioremap();
+ return -EIO;
+ }
+ pci_set_master(hi->pdev[0]);
+ pci_set_master(hi->pdev[1]);
+ if (!(hi->ndev = c4_add_dev(hi, i, (long) hi->addr_mapped[0],
+ (long) hi->addr_mapped[1],
+ hi->pdev[0]->irq,
+ hi->pdev[1]->irq)))
+ {
+ drvr_state = SBE_DRVR_DOWN;
+ cleanup_ioremap();
+ /* NOTE: c4_add_dev() does its own device cleanup */
#if 0
- cleanup_devs();
+ cleanup_devs();
#endif
- return error_flag; /* error_flag set w/in add_dev() */
- }
- show_two(hi, i); /* displays found information */
- }
- return 0;
+ return error_flag; /* error_flag set w/in add_dev() */
+ }
+ show_two(hi, i); /* displays found information */
+ }
+ return 0;
}
/*** End-of-File ***/
--
1.7.9.5
---
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
