[PATCH 04/19] Merge dgap_fep5.c into dgap_driver.c

[Mark Hounschell <markh@xxxxxxxxxx>]

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged 
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/dgap/Makefile      |    2 +-
 drivers/staging/dgap/dgap_driver.c | 1857 +++++++++++++++++++++++++++++++++++
 drivers/staging/dgap/dgap_fep5.c   | 1902 ------------------------------------
 3 files changed, 1858 insertions(+), 1903 deletions(-)
 delete mode 100644 drivers/staging/dgap/dgap_fep5.c

diff --git a/drivers/staging/dgap/Makefile b/drivers/staging/dgap/Makefile
index b80cad5..867b1e5 100644
--- a/drivers/staging/dgap/Makefile
+++ b/drivers/staging/dgap/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_DGAP) += dgap.o
 
 
-dgap-objs :=	dgap_driver.o   dgap_fep5.o \
+dgap-objs :=	dgap_driver.o \
 		dgap_parse.o	dgap_trace.o \
 		dgap_sysfs.o
 
diff --git a/drivers/staging/dgap/dgap_driver.c b/drivers/staging/dgap/dgap_driver.c
index b49f698..db4da9a 100644
--- a/drivers/staging/dgap/dgap_driver.c
+++ b/drivers/staging/dgap/dgap_driver.c
@@ -126,6 +126,12 @@ static void dgap_tty_set_termios(struct tty_struct *tty, struct ktermios *old_te
 static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c);
 static void dgap_tty_send_xchar(struct tty_struct *tty, char ch);
 
+/*
+ * Our function prototypes from dgap_fep5
+ */
+static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds);
+static int dgap_event(struct board_t *bd);
+
 /* Driver load/unload functions */
 int			dgap_init_module(void);
 void			dgap_cleanup_module(void);
@@ -168,6 +174,7 @@ static struct class *	dgap_class;
 static struct board_t	*dgap_BoardsByMajor[256];
 static uchar		*dgap_TmpWriteBuf = NULL;
 static DECLARE_MUTEX(dgap_TmpWriteSem);
+static uint dgap_count = 500;
 
 /*
  * Poller stuff
@@ -4522,3 +4529,1853 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 		return(-ENOIOCTLCMD);
 	}
 }
+/*
+ * Loads the dgap.conf config file from the user.
+ */
+void dgap_do_config_load(uchar __user *uaddr, int len)
+{
+	int orig_len = len;
+	char *to_addr;
+	uchar __user *from_addr = uaddr;
+	char buf[U2BSIZE];
+	int n;
+
+	to_addr = dgap_config_buf = kzalloc(len + 1, GFP_ATOMIC);
+	if (!dgap_config_buf) {
+		DPR_INIT(("dgap_do_config_load - unable to allocate memory for file\n"));
+		dgap_driver_state = DRIVER_NEED_CONFIG_LOAD;
+		return;
+	}
+
+	n = U2BSIZE;
+	while (len) {
+
+		if (n > len)
+			n = len;
+
+		if (copy_from_user((char *) &buf, from_addr, n) == -1 )
+			return;
+
+		/* Copy data from buffer to kernel memory */
+		memcpy(to_addr, buf, n);
+
+		/* increment counts */
+		len -= n;
+		to_addr += n;
+		from_addr += n;
+		n = U2BSIZE;
+	}
+
+	dgap_config_buf[orig_len] = '\0';
+
+	to_addr = dgap_config_buf;
+	dgap_parsefile(&to_addr, TRUE);
+
+	DPR_INIT(("dgap_config_load() finish\n"));
+
+	return;
+}
+
+
+int dgap_after_config_loaded(void)
+{
+	int i = 0;
+	int rc = 0;
+
+	/*
+	 * Register our ttys, now that we have the config loaded.
+	 */
+	for (i = 0; i < dgap_NumBoards; ++i) {
+
+		/*
+		 * Initialize KME waitqueues...
+		 */
+		init_waitqueue_head(&(dgap_Board[i]->kme_wait));
+
+		/*
+		 * allocate flip buffer for board.
+		 */
+		dgap_Board[i]->flipbuf = kzalloc(MYFLIPLEN, GFP_ATOMIC);
+		dgap_Board[i]->flipflagbuf = kzalloc(MYFLIPLEN, GFP_ATOMIC);
+	}
+
+	return rc;
+}
+
+
+
+/*=======================================================================
+ *
+ *      usertoboard - copy from user space to board space.
+ *
+ *=======================================================================*/
+static int dgap_usertoboard(struct board_t *brd, char *to_addr, char __user *from_addr, int len)
+{
+	char buf[U2BSIZE];
+	int n = U2BSIZE;
+
+	if (!brd || brd->magic != DGAP_BOARD_MAGIC)
+		return -EFAULT;
+
+	while (len) {
+		if (n > len)
+			n = len;
+
+		if (copy_from_user((char *) &buf, from_addr, n) == -1 ) {
+			return -EFAULT;
+		}
+
+		/* Copy data from buffer to card memory */
+		memcpy_toio(to_addr, buf, n);
+
+		/* increment counts */
+		len -= n;
+		to_addr += n;
+		from_addr += n;
+		n = U2BSIZE;
+	}
+	return 0;
+}
+
+
+/*
+ * Copies the BIOS code from the user to the board,
+ * and starts the BIOS running.
+ */
+void dgap_do_bios_load(struct board_t *brd, uchar __user *ubios, int len)
+{
+	uchar *addr;
+	uint offset;
+	int i;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+		return;
+
+	DPR_INIT(("dgap_do_bios_load() start\n"));
+
+	addr = brd->re_map_membase;
+
+	/*
+	 * clear POST area
+	 */
+	for (i = 0; i < 16; i++)
+		writeb(0, addr + POSTAREA + i);
+
+	/*
+	 * Download bios
+	 */
+	offset = 0x1000;
+	if (dgap_usertoboard(brd, addr + offset, ubios, len) == -1 ) {
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+		return;
+	}
+
+	writel(0x0bf00401, addr);
+	writel(0, (addr + 4));
+
+	/* Clear the reset, and change states. */
+	writeb(FEPCLR, brd->re_map_port);
+	brd->state = WAIT_BIOS_LOAD;
+}
+
+
+/*
+ * Checks to see if the BIOS completed running on the card.
+ */
+static void dgap_do_wait_for_bios(struct board_t *brd)
+{
+	uchar *addr;
+	u16 word;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+		return;
+
+	addr = brd->re_map_membase;
+	word = readw(addr + POSTAREA);
+
+	/* Check to see if BIOS thinks board is good. (GD). */
+	if (word == *(u16 *) "GD") {
+		DPR_INIT(("GOT GD in memory, moving states.\n"));
+		brd->state = FINISHED_BIOS_LOAD;
+		return;
+	}
+
+	/* Give up on board after too long of time taken */
+	if (brd->wait_for_bios++ > 5000) {
+		u16 err1 = readw(addr + SEQUENCE);
+		u16 err2 = readw(addr + ERROR);
+		APR(("***WARNING*** %s failed diagnostics.  Error #(%x,%x).\n",
+			brd->name, err1, err2));
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+	}
+}
+
+
+/*
+ * Copies the FEP code from the user to the board,
+ * and starts the FEP running.
+ */
+void dgap_do_fep_load(struct board_t *brd, uchar __user *ufep, int len)
+{
+	uchar *addr;
+	uint offset;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+		return;
+
+	addr = brd->re_map_membase;
+
+	DPR_INIT(("dgap_do_fep_load() for board %s : start\n", brd->name));
+
+	/*
+	 * Download FEP
+	 */
+	offset = 0x1000;
+	if (dgap_usertoboard(brd, addr + offset, ufep, len) == -1 ) {
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+		return;
+	}
+
+	/*
+	 * If board is a concentrator product, we need to give
+	 * it its config string describing how the concentrators look.
+	 */
+	if ((brd->type == PCX) || (brd->type == PEPC)) {
+		uchar string[100];
+		uchar *config, *xconfig;
+		int i = 0;
+
+		xconfig = dgap_create_config_string(brd, string);
+
+		/* Write string to board memory */
+		config = addr + CONFIG;
+		for (; i < CONFIGSIZE; i++, config++, xconfig++) {
+			writeb(*xconfig, config);
+			if ((*xconfig & 0xff) == 0xff)
+				break;
+		}
+	}
+
+	writel(0xbfc01004, (addr + 0xc34));
+	writel(0x3, (addr + 0xc30));
+
+	/* change states. */
+	brd->state = WAIT_FEP_LOAD;
+
+	DPR_INIT(("dgap_do_fep_load() for board %s : finish\n", brd->name));
+
+}
+
+
+/*
+ * Waits for the FEP to report thats its ready for us to use.
+ */
+static void dgap_do_wait_for_fep(struct board_t *brd)
+{
+	uchar *addr;
+	u16 word;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+		return;
+
+	addr = brd->re_map_membase;
+
+	DPR_INIT(("dgap_do_wait_for_fep() for board %s : start. addr: %p\n", brd->name, addr));
+
+	word = readw(addr + FEPSTAT);
+
+	/* Check to see if FEP is up and running now. */
+	if (word == *(u16 *) "OS") {
+		DPR_INIT(("GOT OS in memory for board %s, moving states.\n", brd->name));
+		brd->state = FINISHED_FEP_LOAD;
+
+		/*
+		 * Check to see if the board can support FEP5+ commands.
+		 */
+		word = readw(addr + FEP5_PLUS);
+		if (word == *(u16 *) "5A") {
+			DPR_INIT(("GOT 5A in memory for board %s, board supports extended FEP5 commands.\n", brd->name));
+			brd->bd_flags |= BD_FEP5PLUS;
+		}
+
+		return;
+	}
+
+	/* Give up on board after too long of time taken */
+	if (brd->wait_for_fep++ > 5000) {
+		u16 err1 = readw(addr + SEQUENCE);
+		u16 err2 = readw(addr + ERROR);
+		APR(("***WARNING*** FEPOS for %s not functioning.  Error #(%x,%x).\n",
+			brd->name, err1, err2));
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+	}
+
+	DPR_INIT(("dgap_do_wait_for_fep() for board %s : finish\n", brd->name));
+}
+
+
+/*
+ * Physically forces the FEP5 card to reset itself.
+ */
+static void dgap_do_reset_board(struct board_t *brd)
+{
+	uchar check;
+	u32 check1;
+	u32 check2;
+	int i = 0;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase || !brd->re_map_port) {
+		DPR_INIT(("dgap_do_reset_board() start. bad values. brd: %p mem: %p io: %p\n",
+			brd, brd ? brd->re_map_membase : 0, brd ? brd->re_map_port : 0));
+		return;
+	}
+
+	DPR_INIT(("dgap_do_reset_board() start. io: %p\n", brd->re_map_port));
+
+	/* FEPRST does not vary among supported boards */
+	writeb(FEPRST, brd->re_map_port);
+
+	for (i = 0; i <= 1000; i++) {
+		check = readb(brd->re_map_port) & 0xe;
+		if (check == FEPRST)
+			break;
+		udelay(10);
+
+	}
+	if (i > 1000) {
+		APR(("*** WARNING *** Board not resetting...  Failing board.\n"));
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+		goto failed;
+	}
+
+	/*
+	 * Make sure there really is memory out there.
+	 */
+	writel(0xa55a3cc3, (brd->re_map_membase + LOWMEM));
+	writel(0x5aa5c33c, (brd->re_map_membase + HIGHMEM));
+	check1 = readl(brd->re_map_membase + LOWMEM);
+	check2 = readl(brd->re_map_membase + HIGHMEM);
+
+	if ((check1 != 0xa55a3cc3) || (check2 != 0x5aa5c33c)) {
+		APR(("*** Warning *** No memory at %p for board.\n", brd->re_map_membase));
+		brd->state = BOARD_FAILED;
+		brd->dpastatus = BD_NOFEP;
+		goto failed;
+	}
+
+	if (brd->state != BOARD_FAILED)
+		brd->state = FINISHED_RESET;
+
+failed:
+	DPR_INIT(("dgap_do_reset_board() finish\n"));
+}
+
+
+/*
+ * Sends a concentrator image into the FEP5 board.
+ */
+void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len)
+{
+	char *vaddr;
+	u16 offset = 0;
+	struct downld_t *to_dp;
+
+	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
+		return;
+
+	vaddr = brd->re_map_membase;
+
+	offset = readw((u16 *) (vaddr + DOWNREQ));
+	to_dp = (struct downld_t *) (vaddr + (int) offset);
+
+	/*
+	 * The image was already read into kernel space,
+	 * we do NOT need a user space read here
+	 */
+	memcpy_toio((char *) to_dp, uaddr, sizeof(struct downld_t));
+
+	/* Tell card we have data for it */
+	writew(0, vaddr + (DOWNREQ));
+
+	brd->conc_dl_status = NO_PENDING_CONCENTRATOR_REQUESTS;
+}
+
+
+#define EXPANSION_ROM_SIZE	(64 * 1024)
+#define FEP5_ROM_MAGIC		(0xFEFFFFFF)
+
+static void dgap_get_vpd(struct board_t *brd)
+{
+	u32 magic;
+	u32 base_offset;
+	u16 rom_offset;
+	u16 vpd_offset;
+	u16 image_length;
+	u16 i;
+	uchar byte1;
+	uchar byte2;
+
+	/*
+	 * Poke the magic number at the PCI Rom Address location.
+	 * If VPD is supported, the value read from that address
+	 * will be non-zero.
+	 */
+	magic = FEP5_ROM_MAGIC;
+	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+	pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
+
+	/* VPD not supported, bail */
+	if (!magic)
+		return;
+
+	/*
+	 * To get to the OTPROM memory, we have to send the boards base
+	 * address or'ed with 1 into the PCI Rom Address location.
+	 */
+	magic = brd->membase | 0x01;
+	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+	pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
+
+	byte1 = readb(brd->re_map_membase);
+	byte2 = readb(brd->re_map_membase + 1);
+
+	/*
+	 * If the board correctly swapped to the OTPROM memory,
+	 * the first 2 bytes (header) should be 0x55, 0xAA
+	 */
+	if (byte1 == 0x55 && byte2 == 0xAA) {
+
+		base_offset = 0;
+
+		/*
+		 * We have to run through all the OTPROM memory looking
+		 * for the VPD offset.
+		 */
+		while (base_offset <= EXPANSION_ROM_SIZE) {
+
+			/*
+			 * Lots of magic numbers here.
+			 *
+			 * The VPD offset is located inside the ROM Data Structure.
+			 * We also have to remember the length of each
+			 * ROM Data Structure, so we can "hop" to the next
+			 * entry if the VPD isn't in the current
+			 * ROM Data Structure.
+			 */
+			rom_offset = readw(brd->re_map_membase + base_offset + 0x18);
+			image_length = readw(brd->re_map_membase + rom_offset + 0x10) * 512;
+			vpd_offset = readw(brd->re_map_membase + rom_offset + 0x08);
+
+			/* Found the VPD entry */
+			if (vpd_offset)
+				break;
+
+			/* We didn't find a VPD entry, go to next ROM entry. */
+			base_offset += image_length;
+
+			byte1 = readb(brd->re_map_membase + base_offset);
+			byte2 = readb(brd->re_map_membase + base_offset + 1);
+
+			/*
+			 * If the new ROM offset doesn't have 0x55, 0xAA
+			 * as its header, we have run out of ROM.
+			 */
+			if (byte1 != 0x55 || byte2 != 0xAA)
+				break;
+		}
+
+		/*
+		 * If we have a VPD offset, then mark the board
+		 * as having a valid VPD, and copy VPDSIZE (512) bytes of
+		 * that VPD to the buffer we have in our board structure.
+		 */
+		if (vpd_offset) {
+			brd->bd_flags |= BD_HAS_VPD;
+			for (i = 0; i < VPDSIZE; i++)
+				brd->vpd[i] = readb(brd->re_map_membase + vpd_offset + i);
+		}
+	}
+
+	/*
+	 * We MUST poke the magic number at the PCI Rom Address location again.
+	 * This makes the card report the regular board memory back to us,
+	 * rather than the OTPROM memory.
+	 */
+	magic = FEP5_ROM_MAGIC;
+	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
+}
+
+
+/*
+ * Our board poller function.
+ */
+void dgap_poll_tasklet(unsigned long data)
+{
+	struct board_t *bd = (struct board_t *) data;
+	ulong  lock_flags;
+	ulong  lock_flags2;
+	char *vaddr;
+	u16 head, tail;
+	u16 *chk_addr;
+	u16 check = 0;
+
+	if (!bd || (bd->magic != DGAP_BOARD_MAGIC)) {
+		APR(("dgap_poll_tasklet() - NULL or bad bd.\n"));
+		return;
+	}
+
+	if (bd->inhibit_poller)
+		return;
+
+	DGAP_LOCK(bd->bd_lock, lock_flags);
+
+	vaddr = bd->re_map_membase;
+
+	/*
+	 * If board is ready, parse deeper to see if there is anything to do.
+	 */
+	if (bd->state == BOARD_READY) {
+
+		struct ev_t *eaddr = NULL;
+
+		if (!bd->re_map_membase) {
+			DGAP_UNLOCK(bd->bd_lock, lock_flags);
+			return;
+		}
+		if (!bd->re_map_port) {
+			DGAP_UNLOCK(bd->bd_lock, lock_flags);
+			return;
+		}
+
+		if (!bd->nasync) {
+			goto out;
+		}
+
+		/*
+		 * If this is a CX or EPCX, we need to see if the firmware
+		 * is requesting a concentrator image from us.
+		 */
+		if ((bd->type == PCX) || (bd->type == PEPC)) {
+			chk_addr = (u16 *) (vaddr + DOWNREQ);
+			check = readw(chk_addr);
+			/* Nonzero if FEP is requesting concentrator image. */
+			if (check) {
+				if (bd->conc_dl_status == NO_PENDING_CONCENTRATOR_REQUESTS)
+					bd->conc_dl_status = NEED_CONCENTRATOR;
+				/*
+				 * Signal downloader, its got some work to do.
+				 */
+				DGAP_LOCK(dgap_dl_lock, lock_flags2);
+				if (dgap_dl_action != 1) {
+					dgap_dl_action = 1;
+					wake_up_interruptible(&dgap_dl_wait);
+				}
+				DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
+
+			}
+		}
+
+		eaddr = (struct ev_t *) (vaddr + EVBUF);
+
+		/* Get our head and tail */
+		head = readw(&(eaddr->ev_head));
+		tail = readw(&(eaddr->ev_tail));
+
+		/*
+		 * If there is an event pending. Go service it.
+		 */
+		if (head != tail) {
+			DGAP_UNLOCK(bd->bd_lock, lock_flags);
+			dgap_event(bd);
+			DGAP_LOCK(bd->bd_lock, lock_flags);
+		}
+
+out:
+		/*
+		 * If board is doing interrupts, ACK the interrupt.
+		 */
+		if (bd && bd->intr_running) {
+			readb(bd->re_map_port + 2);
+		}
+
+		DGAP_UNLOCK(bd->bd_lock, lock_flags);
+		return;
+	}
+
+	/* Our state machine to get the board up and running */
+
+	/* Reset board */
+	if (bd->state == NEED_RESET) {
+
+		/* Get VPD info */
+		dgap_get_vpd(bd);
+
+		dgap_do_reset_board(bd);
+	}
+
+	/* Move to next state */
+	if (bd->state == FINISHED_RESET) {
+		bd->state = NEED_CONFIG;
+	}
+
+	if (bd->state == NEED_CONFIG) {
+		/*
+		 * Match this board to a config the user created for us.
+		 */
+		bd->bd_config = dgap_find_config(bd->type, bd->pci_bus, bd->pci_slot);
+
+		/*
+		 * Because the 4 port Xr products share the same PCI ID
+		 * as the 8 port Xr products, if we receive a NULL config
+		 * back, and this is a PAPORT8 board, retry with a
+		 * PAPORT4 attempt as well.
+		 */
+		if (bd->type == PAPORT8 && !bd->bd_config) {
+			bd->bd_config = dgap_find_config(PAPORT4, bd->pci_bus, bd->pci_slot);
+		}
+
+		/*
+		 * Register the ttys (if any) into the kernel.
+		 */
+		if (bd->bd_config) {
+			bd->state = FINISHED_CONFIG;
+		}
+		else {
+			bd->state = CONFIG_NOT_FOUND;
+		}
+	}
+
+	/* Move to next state */
+	if (bd->state == FINISHED_CONFIG) {
+		bd->state = NEED_DEVICE_CREATION;
+	}
+
+	/* Move to next state */
+	if (bd->state == NEED_DEVICE_CREATION) {
+		/*
+		 * Signal downloader, its got some work to do.
+		 */
+		DGAP_LOCK(dgap_dl_lock, lock_flags2);
+		if (dgap_dl_action != 1) {
+			dgap_dl_action = 1;
+			wake_up_interruptible(&dgap_dl_wait);
+		}
+		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
+	}
+
+	/* Move to next state */
+	if (bd->state == FINISHED_DEVICE_CREATION) {
+		bd->state = NEED_BIOS_LOAD;
+	}
+
+	/* Move to next state */
+	if (bd->state == NEED_BIOS_LOAD) {
+		/*
+		 * Signal downloader, its got some work to do.
+		 */
+		DGAP_LOCK(dgap_dl_lock, lock_flags2);
+		if (dgap_dl_action != 1) {
+			dgap_dl_action = 1;
+			wake_up_interruptible(&dgap_dl_wait);
+		}
+		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
+	}
+
+	/* Wait for BIOS to test board... */
+	if (bd->state == WAIT_BIOS_LOAD) {
+		dgap_do_wait_for_bios(bd);
+	}
+
+	/* Move to next state */
+	if (bd->state == FINISHED_BIOS_LOAD) {
+		bd->state = NEED_FEP_LOAD;
+
+		/*
+		 * Signal downloader, its got some work to do.
+		 */
+		DGAP_LOCK(dgap_dl_lock, lock_flags2);
+		if (dgap_dl_action != 1) {
+			dgap_dl_action = 1;
+			wake_up_interruptible(&dgap_dl_wait);
+		}
+		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
+	}
+
+	/* Wait for FEP to load on board... */
+	if (bd->state == WAIT_FEP_LOAD) {
+		dgap_do_wait_for_fep(bd);
+	}
+
+
+	/* Move to next state */
+	if (bd->state == FINISHED_FEP_LOAD) {
+
+		/*
+		 * Do tty device initialization.
+		 */
+		int rc = dgap_tty_init(bd);
+
+		if (rc < 0) {
+			dgap_tty_uninit(bd);
+			APR(("Can't init tty devices (%d)\n", rc));
+			bd->state = BOARD_FAILED;
+			bd->dpastatus = BD_NOFEP;
+		}
+		else {
+			bd->state = NEED_PROC_CREATION;
+
+			/*
+			 * Signal downloader, its got some work to do.
+			 */
+			DGAP_LOCK(dgap_dl_lock, lock_flags2);
+			if (dgap_dl_action != 1) {
+				dgap_dl_action = 1;
+				wake_up_interruptible(&dgap_dl_wait);
+			}
+			DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
+		}
+	}
+
+	/* Move to next state */
+	if (bd->state == FINISHED_PROC_CREATION) {
+
+		bd->state = BOARD_READY;
+		bd->dpastatus = BD_RUNNING;
+
+		/*
+		 * If user requested the board to run in interrupt mode,
+		 * go and set it up on the board.
+		 */
+		if (bd->intr_used) {
+			writew(1, (bd->re_map_membase + ENABLE_INTR));
+			/*
+			 * Tell the board to poll the UARTS as fast as possible.
+			 */
+			writew(FEPPOLL_MIN, (bd->re_map_membase + FEPPOLL));
+			bd->intr_running = 1;
+		}
+
+		/* Wake up anyone waiting for board state to change to ready */
+		wake_up_interruptible(&bd->state_wait);
+	}
+
+	DGAP_UNLOCK(bd->bd_lock, lock_flags);
+}
+
+
+/*=======================================================================
+ *
+ *      dgap_cmdb - Sends a 2 byte command to the FEP.
+ *
+ *              ch      - Pointer to channel structure.
+ *              cmd     - Command to be sent.
+ *              byte1   - Integer containing first byte to be sent.
+ *              byte2   - Integer containing second byte to be sent.
+ *              ncmds   - Wait until ncmds or fewer cmds are left
+ *                        in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1, uchar byte2, uint ncmds)
+{
+	char		*vaddr = NULL;
+	struct cm_t	*cm_addr = NULL;
+	uint		count;
+	uint		n;
+	u16		head;
+	u16		tail;
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * Check if board is still alive.
+	 */
+	if (ch->ch_bd->state == BOARD_FAILED) {
+		DPR_CORE(("%s:%d board is in failed state.\n", __FILE__, __LINE__));
+		return;
+	}
+
+	/*
+	 * Make sure the pointers are in range before
+	 * writing to the FEP memory.
+	 */
+	vaddr = ch->ch_bd->re_map_membase;
+
+	if (!vaddr)
+		return;
+
+	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
+	head = readw(&(cm_addr->cm_head));
+
+	/*
+	 * Forget it if pointers out of range.
+	 */
+	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+		DPR_CORE(("%s:%d pointers out of range, failing board!\n", __FILE__, __LINE__));
+		ch->ch_bd->state = BOARD_FAILED;
+		return;
+	}
+
+	/*
+	 * Put the data in the circular command buffer.
+	 */
+	writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
+	writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
+	writeb(byte1, (char *) (vaddr + head + CMDSTART + 2));
+	writeb(byte2, (char *) (vaddr + head + CMDSTART + 3));
+
+	head = (head + 4) & (CMDMAX - CMDSTART - 4);
+
+	writew(head, &(cm_addr->cm_head));
+
+	/*
+	 * Wait if necessary before updating the head
+	 * pointer to limit the number of outstanding
+	 * commands to the FEP.   If the time spent waiting
+	 * is outlandish, declare the FEP dead.
+	 */
+	for (count = dgap_count ;;) {
+
+		head = readw(&(cm_addr->cm_head));
+		tail = readw(&(cm_addr->cm_tail));
+
+		n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+		if (n <= ncmds * sizeof(struct cm_t))
+			break;
+
+		if (--count == 0) {
+			DPR_CORE(("%s:%d failing board.\n",__FILE__, __LINE__));
+			ch->ch_bd->state = BOARD_FAILED;
+			return;
+		}
+		udelay(10);
+	}
+}
+
+
+/*=======================================================================
+ *
+ *      dgap_cmdw - Sends a 1 word command to the FEP.
+ *
+ *              ch      - Pointer to channel structure.
+ *              cmd     - Command to be sent.
+ *              word    - Integer containing word to be sent.
+ *              ncmds   - Wait until ncmds or fewer cmds are left
+ *                        in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds)
+{
+	char		*vaddr = NULL;
+	struct cm_t	*cm_addr = NULL;
+	uint		count;
+	uint		n;
+	u16		head;
+	u16		tail;
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * Check if board is still alive.
+	 */
+	if (ch->ch_bd->state == BOARD_FAILED) {
+		DPR_CORE(("%s:%d board is failed!\n", __FILE__, __LINE__));
+		return;
+	}
+
+	/*
+	 * Make sure the pointers are in range before
+	 * writing to the FEP memory.
+	 */
+	vaddr = ch->ch_bd->re_map_membase;
+	if (!vaddr)
+		return;
+
+	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
+	head = readw(&(cm_addr->cm_head));
+
+	/*
+	 * Forget it if pointers out of range.
+	 */
+	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+		DPR_CORE(("%s:%d Pointers out of range.  Failing board.\n",__FILE__, __LINE__));
+		ch->ch_bd->state = BOARD_FAILED;
+		return;
+	}
+
+	/*
+	 * Put the data in the circular command buffer.
+	 */
+	writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
+	writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
+	writew((u16) word, (char *) (vaddr + head + CMDSTART + 2));
+
+	head = (head + 4) & (CMDMAX - CMDSTART - 4);
+
+	writew(head, &(cm_addr->cm_head));
+
+	/*
+	 * Wait if necessary before updating the head
+	 * pointer to limit the number of outstanding
+	 * commands to the FEP.   If the time spent waiting
+	 * is outlandish, declare the FEP dead.
+	 */
+	for (count = dgap_count ;;) {
+
+		head = readw(&(cm_addr->cm_head));
+		tail = readw(&(cm_addr->cm_tail));
+
+		n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+		if (n <= ncmds * sizeof(struct cm_t))
+			break;
+
+		if (--count == 0) {
+			DPR_CORE(("%s:%d Failing board.\n",__FILE__, __LINE__));
+			ch->ch_bd->state = BOARD_FAILED;
+			return;
+		}
+		udelay(10);
+	}
+}
+
+
+
+/*=======================================================================
+ *
+ *      dgap_cmdw_ext - Sends a extended word command to the FEP.
+ *
+ *              ch      - Pointer to channel structure.
+ *              cmd     - Command to be sent.
+ *              word    - Integer containing word to be sent.
+ *              ncmds   - Wait until ncmds or fewer cmds are left
+ *                        in the cmd buffer before returning.
+ *
+ *=======================================================================*/
+static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds)
+{
+	char		*vaddr = NULL;
+	struct cm_t	*cm_addr = NULL;
+	uint		count;
+	uint		n;
+	u16		head;
+	u16		tail;
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * Check if board is still alive.
+	 */
+	if (ch->ch_bd->state == BOARD_FAILED) {
+		DPR_CORE(("%s:%d board is failed!\n", __FILE__, __LINE__));
+		return;
+	}
+
+	/*
+	 * Make sure the pointers are in range before
+	 * writing to the FEP memory.
+	 */
+	vaddr = ch->ch_bd->re_map_membase;
+	if (!vaddr)
+		return;
+
+	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
+	head = readw(&(cm_addr->cm_head));
+
+	/*
+	 * Forget it if pointers out of range.
+	 */
+	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
+		DPR_CORE(("%s:%d Pointers out of range.  Failing board.\n",__FILE__, __LINE__));
+		ch->ch_bd->state = BOARD_FAILED;
+		return;
+	}
+
+	/*
+	 * Put the data in the circular command buffer.
+	 */
+
+	/* Write an FF to tell the FEP that we want an extended command */
+	writeb((uchar) 0xff, (char *) (vaddr + head + CMDSTART + 0));
+
+	writeb((uchar) ch->ch_portnum, (uchar *) (vaddr + head + CMDSTART + 1));
+	writew((u16) cmd, (char *) (vaddr + head + CMDSTART + 2));
+
+	/*
+	 * If the second part of the command won't fit,
+	 * put it at the beginning of the circular buffer.
+	 */
+	if (((head + 4) >= ((CMDMAX - CMDSTART)) || (head & 03))) {
+		writew((u16) word, (char *) (vaddr + CMDSTART));
+	} else {
+		writew((u16) word, (char *) (vaddr + head + CMDSTART + 4));
+	}
+
+	head = (head + 8) & (CMDMAX - CMDSTART - 4);
+
+	writew(head, &(cm_addr->cm_head));
+
+	/*
+	 * Wait if necessary before updating the head
+	 * pointer to limit the number of outstanding
+	 * commands to the FEP.   If the time spent waiting
+	 * is outlandish, declare the FEP dead.
+	 */
+	for (count = dgap_count ;;) {
+
+		head = readw(&(cm_addr->cm_head));
+		tail = readw(&(cm_addr->cm_tail));
+
+		n = (head - tail) & (CMDMAX - CMDSTART - 4);
+
+		if (n <= ncmds * sizeof(struct cm_t))
+			break;
+
+		if (--count == 0) {
+			DPR_CORE(("%s:%d Failing board.\n",__FILE__, __LINE__));
+			ch->ch_bd->state = BOARD_FAILED;
+			return;
+		}
+		udelay(10);
+	}
+}
+
+
+/*=======================================================================
+ *
+ *      dgap_wmove - Write data to FEP buffer.
+ *
+ *              ch      - Pointer to channel structure.
+ *              buf     - Poiter to characters to be moved.
+ *              cnt     - Number of characters to move.
+ *
+ *=======================================================================*/
+void dgap_wmove(struct channel_t *ch, char *buf, uint cnt)
+{
+	int    n;
+	char   *taddr;
+	struct bs_t    *bs;
+	u16    head;
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return;
+
+	/*
+	 * Check parameters.
+	 */
+	bs   = ch->ch_bs;
+	head = readw(&(bs->tx_head));
+
+	/*
+	 * If pointers are out of range, just return.
+	 */
+	if ((cnt > ch->ch_tsize) || (unsigned)(head - ch->ch_tstart) >= ch->ch_tsize) {
+		DPR_CORE(("%s:%d pointer out of range", __FILE__, __LINE__));
+		return;
+	}
+
+	/*
+	 * If the write wraps over the top of the circular buffer,
+	 * move the portion up to the wrap point, and reset the
+	 * pointers to the bottom.
+	 */
+	n = ch->ch_tstart + ch->ch_tsize - head;
+
+	if (cnt >= n) {
+		cnt -= n;
+		taddr = ch->ch_taddr + head;
+		memcpy_toio(taddr, buf, n);
+		head = ch->ch_tstart;
+		buf += n;
+	}
+
+	/*
+	 * Move rest of data.
+	 */
+	taddr = ch->ch_taddr + head;
+	n = cnt;
+	memcpy_toio(taddr, buf, n);
+	head += cnt;
+
+	writew(head, &(bs->tx_head));
+}
+
+/*
+ * Retrives the current custom baud rate from FEP memory,
+ * and returns it back to the user.
+ * Returns 0 on error.
+ */
+uint dgap_get_custom_baud(struct channel_t *ch)
+{
+	uchar *vaddr;
+	ulong offset = 0;
+	uint value = 0;
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
+		return 0;
+	}
+
+	if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC) {
+		return 0;
+	}
+
+	if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS))
+		return 0;
+
+	vaddr = ch->ch_bd->re_map_membase;
+
+	if (!vaddr)
+		return 0;
+
+	/*
+	 * Go get from fep mem, what the fep
+	 * believes the custom baud rate is.
+	 */
+	offset = ((((*(unsigned short *)(vaddr + ECS_SEG)) << 4) +
+		(ch->ch_portnum * 0x28) + LINE_SPEED));
+
+	value = readw(vaddr + offset);
+	return value;
+}
+
+
+/*
+ * Calls the firmware to reset this channel.
+ */
+void dgap_firmware_reset_port(struct channel_t *ch)
+{
+	dgap_cmdb(ch, CHRESET, 0, 0, 0);
+
+	/*
+	 * Now that the channel is reset, we need to make sure
+	 * all the current settings get reapplied to the port
+	 * in the firmware.
+	 *
+	 * So we will set the driver's cache of firmware
+	 * settings all to 0, and then call param.
+	 */
+	ch->ch_fepiflag = 0;
+	ch->ch_fepcflag = 0;
+	ch->ch_fepoflag = 0;
+	ch->ch_fepstartc = 0;
+	ch->ch_fepstopc = 0;
+	ch->ch_fepastartc = 0;
+	ch->ch_fepastopc = 0;
+	ch->ch_mostat = 0;
+	ch->ch_hflow = 0;
+}
+
+
+/*=======================================================================
+ *
+ *      dgap_param - Set Digi parameters.
+ *
+ *              struct tty_struct *     - TTY for port.
+ *
+ *=======================================================================*/
+int dgap_param(struct tty_struct *tty)
+{
+	struct ktermios *ts;
+	struct board_t *bd;
+	struct channel_t *ch;
+	struct bs_t   *bs;
+	struct un_t   *un;
+	u16	head;
+	u16	cflag;
+	u16	iflag;
+	uchar	mval;
+	uchar	hflow;
+
+	if (!tty || tty->magic != TTY_MAGIC)
+		return -ENXIO;
+
+	un = (struct un_t *) tty->driver_data;
+	if (!un || un->magic != DGAP_UNIT_MAGIC)
+		return -ENXIO;
+
+	ch = un->un_ch;
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return -ENXIO;
+
+	bd = ch->ch_bd;
+	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+		return -ENXIO;
+
+	bs = ch->ch_bs;
+	if (!bs)
+		return -ENXIO;
+
+	DPR_PARAM(("param start: tdev: %x cflags: %x oflags: %x iflags: %x\n",
+		ch->ch_tun.un_dev, ch->ch_c_cflag, ch->ch_c_oflag, ch->ch_c_iflag));
+
+	ts = &tty->termios;
+
+	/*
+	 * If baud rate is zero, flush queues, and set mval to drop DTR.
+	 */
+	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+
+		/* flush rx */
+		head = readw(&(ch->ch_bs->rx_head));
+		writew(head, &(ch->ch_bs->rx_tail));
+
+		/* flush tx */
+		head = readw(&(ch->ch_bs->tx_head));
+		writew(head, &(ch->ch_bs->tx_tail));
+
+		ch->ch_flags |= (CH_BAUD0);
+
+		/* Drop RTS and DTR */
+		ch->ch_mval &= ~(D_RTS(ch)|D_DTR(ch));
+		mval = D_DTR(ch) | D_RTS(ch);
+		ch->ch_baud_info = 0;
+
+	} else if (ch->ch_custom_speed && (bd->bd_flags & BD_FEP5PLUS)) {
+		/*
+		 * Tell the fep to do the command
+		 */
+
+		DPR_PARAM(("param: Want %d speed\n", ch->ch_custom_speed));
+
+		dgap_cmdw_ext(ch, 0xff01, ch->ch_custom_speed, 0);
+
+		/*
+		 * Now go get from fep mem, what the fep
+		 * believes the custom baud rate is.
+		 */
+		ch->ch_baud_info = ch->ch_custom_speed = dgap_get_custom_baud(ch);
+
+		DPR_PARAM(("param: Got %d speed\n", ch->ch_custom_speed));
+
+		/* Handle transition from B0 */
+		if (ch->ch_flags & CH_BAUD0) {
+			ch->ch_flags &= ~(CH_BAUD0);
+			ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
+		}
+		mval = D_DTR(ch) | D_RTS(ch);
+
+	} else {
+		/*
+		 * Set baud rate, character size, and parity.
+		 */
+
+
+		int iindex = 0;
+		int jindex = 0;
+		int baud = 0;
+
+		ulong bauds[4][16] = {
+			{ /* slowbaud */
+				0,	50,	75,	110,
+				134,	150,	200,	300,
+				600,	1200,	1800,	2400,
+				4800,	9600,	19200,	38400 },
+			{ /* slowbaud & CBAUDEX */
+				0,	57600,	115200,	230400,
+				460800,	150,	200,	921600,
+				600,	1200,	1800,	2400,
+				4800,	9600,	19200,	38400 },
+			{ /* fastbaud */
+				0,	57600,	76800,	115200,
+				14400,	57600,	230400,	76800,
+				115200,	230400,	28800,	460800,
+				921600,	9600,	19200,	38400 },
+			{ /* fastbaud & CBAUDEX */
+				0,	57600,	115200,	230400,
+				460800,	150,	200,	921600,
+				600,	1200,	1800,	2400,
+				4800,	9600,	19200,	38400 }
+		};
+
+		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
+		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGAP_PRINT))
+			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
+		else
+			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
+
+		if (ch->ch_c_cflag & CBAUDEX)
+			iindex = 1;
+
+		if (ch->ch_digi.digi_flags & DIGI_FAST)
+			iindex += 2;
+
+		jindex = baud;
+
+		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16)) {
+			baud = bauds[iindex][jindex];
+		} else {
+			DPR_IOCTL(("baud indices were out of range (%d)(%d)",
+				iindex, jindex));
+			baud = 0;
+		}
+
+		if (baud == 0)
+			baud = 9600;
+
+		ch->ch_baud_info = baud;
+
+
+		/*
+		 * CBAUD has bit position 0x1000 set these days to indicate Linux
+		 * baud rate remap.
+		 * We use a different bit assignment for high speed.  Clear this
+		 * bit out while grabbing the parts of "cflag" we want.
+		 */
+		cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
+
+		/*
+		 * HUPCL bit is used by FEP to indicate fast baud
+		 * table is to be used.
+		 */
+		if ((ch->ch_digi.digi_flags & DIGI_FAST) || (ch->ch_c_cflag & CBAUDEX))
+			cflag |= HUPCL;
+
+
+		if ((ch->ch_c_cflag & CBAUDEX) && !(ch->ch_digi.digi_flags & DIGI_FAST)) {
+		/*
+		 * The below code is trying to guarantee that only baud rates
+		 * 115200, 230400, 460800, 921600 are remapped.  We use exclusive or
+		 * because the various baud rates share common bit positions
+		 * and therefore can't be tested for easily.
+		 */
+			tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX;
+			int baudpart = 0;
+
+			/* Map high speed requests to index into FEP's baud table */
+			switch (tcflag) {
+			case B57600 :
+				baudpart = 1;
+				break;
+#ifdef B76800
+			case B76800 :
+				baudpart = 2;
+				break;
+#endif
+			case B115200 :
+				baudpart = 3;
+				break;
+			case B230400 :
+				baudpart = 9;
+				break;
+			case B460800 :
+				baudpart = 11;
+				break;
+#ifdef B921600
+			case B921600 :
+				baudpart = 12;
+				break;
+#endif
+			default:
+				baudpart = 0;
+			}
+
+			if (baudpart)
+				cflag = (cflag & ~(CBAUD | CBAUDEX)) | baudpart;
+		}
+
+		cflag &= 0xffff;
+
+		if (cflag != ch->ch_fepcflag) {
+			ch->ch_fepcflag = (u16) (cflag & 0xffff);
+
+			/* Okay to have channel and board locks held calling this */
+			dgap_cmdw(ch, SCFLAG, (u16) cflag, 0);
+		}
+
+		/* Handle transition from B0 */
+		if (ch->ch_flags & CH_BAUD0) {
+			ch->ch_flags &= ~(CH_BAUD0);
+			ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
+		}
+		mval = D_DTR(ch) | D_RTS(ch);
+	}
+
+	/*
+	 * Get input flags.
+	 */
+	iflag = ch->ch_c_iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | INPCK | ISTRIP | IXON | IXANY | IXOFF);
+
+	if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE)) {
+		iflag &= ~(IXON | IXOFF);
+		ch->ch_c_iflag &= ~(IXON | IXOFF);
+	}
+
+	/*
+	 * Only the IBM Xr card can switch between
+	 * 232 and 422 modes on the fly
+	 */
+	if (bd->device == PCI_DEVICE_XR_IBM_DID) {
+		if (ch->ch_digi.digi_flags & DIGI_422)
+			dgap_cmdb(ch, SCOMMODE, MODE_422, 0, 0);
+		else
+			dgap_cmdb(ch, SCOMMODE, MODE_232, 0, 0);
+	}
+
+	if (ch->ch_digi.digi_flags & DIGI_ALTPIN)
+		iflag |= IALTPIN ;
+
+	if (iflag != ch->ch_fepiflag) {
+		ch->ch_fepiflag = iflag;
+
+		/* Okay to have channel and board locks held calling this */
+		dgap_cmdw(ch, SIFLAG, (u16) ch->ch_fepiflag, 0);
+	}
+
+	/*
+	 * Select hardware handshaking.
+	 */
+	hflow = 0;
+
+	if (ch->ch_c_cflag & CRTSCTS) {
+		hflow |= (D_RTS(ch) | D_CTS(ch));
+	}
+	if (ch->ch_digi.digi_flags & RTSPACE)
+		hflow |= D_RTS(ch);
+	if (ch->ch_digi.digi_flags & DTRPACE)
+		hflow |= D_DTR(ch);
+	if (ch->ch_digi.digi_flags & CTSPACE)
+		hflow |= D_CTS(ch);
+	if (ch->ch_digi.digi_flags & DSRPACE)
+		hflow |= D_DSR(ch);
+	if (ch->ch_digi.digi_flags & DCDPACE)
+		hflow |= D_CD(ch);
+
+	if (hflow != ch->ch_hflow) {
+		ch->ch_hflow = hflow;
+
+		/* Okay to have channel and board locks held calling this */
+		dgap_cmdb(ch, SHFLOW, (uchar) hflow, 0xff, 0);
+	}
+
+
+	/*
+	 * Set RTS and/or DTR Toggle if needed, but only if product is FEP5+ based.
+	 */
+	if (bd->bd_flags & BD_FEP5PLUS) {
+		u16 hflow2 = 0;
+		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
+			hflow2 |= (D_RTS(ch));
+		}
+		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
+			hflow2 |= (D_DTR(ch));
+		}
+
+		dgap_cmdw_ext(ch, 0xff03, hflow2, 0);
+	}
+
+	/*
+	 * Set modem control lines.
+	 */
+
+	mval ^= ch->ch_mforce & (mval ^ ch->ch_mval);
+
+	DPR_PARAM(("dgap_param: mval: %x ch_mforce: %x ch_mval: %x ch_mostat: %x\n",
+		mval, ch->ch_mforce, ch->ch_mval, ch->ch_mostat));
+
+	if (ch->ch_mostat ^ mval) {
+		ch->ch_mostat = mval;
+
+		/* Okay to have channel and board locks held calling this */
+		DPR_PARAM(("dgap_param: Sending SMODEM mval: %x\n", mval));
+		dgap_cmdb(ch, SMODEM, (uchar) mval, D_RTS(ch)|D_DTR(ch), 0);
+	}
+
+	/*
+	 * Read modem signals, and then call carrier function.
+	 */
+	ch->ch_mistat = readb(&(bs->m_stat));
+	dgap_carrier(ch);
+
+	/*
+	 * Set the start and stop characters.
+	 */
+	if (ch->ch_startc != ch->ch_fepstartc || ch->ch_stopc != ch->ch_fepstopc) {
+		ch->ch_fepstartc = ch->ch_startc;
+		ch->ch_fepstopc =  ch->ch_stopc;
+
+		/* Okay to have channel and board locks held calling this */
+		dgap_cmdb(ch, SFLOWC, ch->ch_fepstartc, ch->ch_fepstopc, 0);
+	}
+
+	/*
+	 * Set the Auxiliary start and stop characters.
+	 */
+	if (ch->ch_astartc != ch->ch_fepastartc || ch->ch_astopc != ch->ch_fepastopc) {
+		ch->ch_fepastartc = ch->ch_astartc;
+		ch->ch_fepastopc = ch->ch_astopc;
+
+		/* Okay to have channel and board locks held calling this */
+		dgap_cmdb(ch, SAFLOWC, ch->ch_fepastartc, ch->ch_fepastopc, 0);
+	}
+
+	DPR_PARAM(("param finish\n"));
+
+	return 0;
+}
+
+
+/*
+ * dgap_parity_scan()
+ *
+ * Convert the FEP5 way of reporting parity errors and breaks into
+ * the Linux line discipline way.
+ */
+void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf, unsigned char *fbuf, int *len)
+{
+	int l = *len;
+	int count = 0;
+	unsigned char *in, *cout, *fout;
+	unsigned char c;
+
+	in = cbuf;
+	cout = cbuf;
+	fout = fbuf;
+
+	DPR_PSCAN(("dgap_parity_scan start\n"));
+
+	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
+		return;
+
+	while (l--) {
+		c = *in++;
+		switch (ch->pscan_state) {
+		default:
+			/* reset to sanity and fall through */
+			ch->pscan_state = 0;
+
+		case 0:
+			/* No FF seen yet */
+			if (c == (unsigned char) '\377') {
+				/* delete this character from stream */
+				ch->pscan_state = 1;
+			} else {
+				*cout++ = c;
+				*fout++ = TTY_NORMAL;
+				count += 1;
+			}
+			break;
+
+		case 1:
+			/* first FF seen */
+			if (c == (unsigned char) '\377') {
+				/* doubled ff, transform to single ff */
+				*cout++ = c;
+				*fout++ = TTY_NORMAL;
+				count += 1;
+				ch->pscan_state = 0;
+			} else {
+				/* save value examination in next state */
+				ch->pscan_savechar = c;
+				ch->pscan_state = 2;
+			}
+			break;
+
+		case 2:
+			/* third character of ff sequence */
+
+			*cout++ = c;
+
+			if (ch->pscan_savechar == 0x0) {
+
+				if (c == 0x0) {
+					DPR_PSCAN(("dgap_parity_scan in 3rd char of ff seq. c: %x setting break.\n", c));
+					ch->ch_err_break++;
+					*fout++ = TTY_BREAK;
+				}
+				else {
+					DPR_PSCAN(("dgap_parity_scan in 3rd char of ff seq. c: %x setting parity.\n", c));
+					ch->ch_err_parity++;
+					*fout++ = TTY_PARITY;
+				}
+			}
+			else {
+				DPR_PSCAN(("%s:%d Logic Error.\n", __FILE__, __LINE__));
+			}
+
+			count += 1;
+			ch->pscan_state = 0;
+		}
+	}
+	*len = count;
+	DPR_PSCAN(("dgap_parity_scan finish\n"));
+}
+
+
+
+
+/*=======================================================================
+ *
+ *      dgap_event - FEP to host event processing routine.
+ *
+ *              bd     - Board of current event.
+ *
+ *=======================================================================*/
+static int dgap_event(struct board_t *bd)
+{
+	struct channel_t *ch;
+	ulong		lock_flags;
+	ulong		lock_flags2;
+	struct bs_t	*bs;
+	uchar		*event;
+	uchar		*vaddr = NULL;
+	struct ev_t	*eaddr = NULL;
+	uint		head;
+	uint		tail;
+	int		port;
+	int		reason;
+	int		modem;
+	int		b1;
+
+	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
+		return -ENXIO;
+
+	DGAP_LOCK(bd->bd_lock, lock_flags);
+
+	vaddr = bd->re_map_membase;
+
+	if (!vaddr) {
+		DGAP_UNLOCK(bd->bd_lock, lock_flags);
+		return -ENXIO;
+	}
+
+	eaddr = (struct ev_t *) (vaddr + EVBUF);
+
+	/* Get our head and tail */
+	head = readw(&(eaddr->ev_head));
+	tail = readw(&(eaddr->ev_tail));
+
+	/*
+	 * Forget it if pointers out of range.
+	 */
+
+	if (head >= EVMAX - EVSTART || tail >= EVMAX - EVSTART ||
+	    (head | tail) & 03) {
+		DPR_EVENT(("should be calling xxfail %d\n", __LINE__));
+		/* Let go of board lock */
+		DGAP_UNLOCK(bd->bd_lock, lock_flags);
+		return -ENXIO;
+	}
+
+	/*
+	 * Loop to process all the events in the buffer.
+	 */
+	while (tail != head) {
+
+		/*
+		 * Get interrupt information.
+		 */
+
+		event = bd->re_map_membase + tail + EVSTART;
+
+		port   = event[0];
+		reason = event[1];
+		modem  = event[2];
+		b1     = event[3];
+
+		DPR_EVENT(("event: jiffies: %ld port: %d reason: %x modem: %x\n",
+			jiffies, port, reason, modem));
+
+		/*
+		 * Make sure the interrupt is valid.
+		 */
+		if (port >= bd->nasync)
+			goto next;
+
+		if (!(reason & (IFMODEM | IFBREAK | IFTLW | IFTEM | IFDATA))) {
+			goto next;
+		}
+
+		ch = bd->channels[port];
+
+		if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
+			goto next;
+		}
+
+		/*
+		 * If we have made it here, the event was valid.
+		 * Lock down the channel.
+		 */
+		DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+		bs = ch->ch_bs;
+
+		if (!bs) {
+			DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+			goto next;
+		}
+
+		/*
+		 * Process received data.
+		 */
+		if (reason & IFDATA) {
+
+			/*
+			 * ALL LOCKS *MUST* BE DROPPED BEFORE CALLING INPUT!
+			 * input could send some data to ld, which in turn
+			 * could do a callback to one of our other functions.
+			 */
+			DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+			DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+			dgap_input(ch);
+
+			DGAP_LOCK(bd->bd_lock, lock_flags);
+			DGAP_LOCK(ch->ch_lock, lock_flags2);
+
+			if (ch->ch_flags & CH_RACTIVE)
+				ch->ch_flags |= CH_RENABLE;
+			else
+				writeb(1, &(bs->idata));
+
+			if (ch->ch_flags & CH_RWAIT) {
+				ch->ch_flags &= ~CH_RWAIT;
+
+				wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+			}
+		}
+
+		/*
+		 * Process Modem change signals.
+		 */
+		if (reason & IFMODEM) {
+			ch->ch_mistat = modem;
+			dgap_carrier(ch);
+		}
+
+		/*
+		 * Process break.
+		 */
+		if (reason & IFBREAK) {
+
+			DPR_EVENT(("got IFBREAK\n"));
+
+			if (ch->ch_tun.un_tty) {
+				/* A break has been indicated */
+				ch->ch_err_break++;
+				tty_buffer_request_room(ch->ch_tun.un_tty->port, 1);
+				tty_insert_flip_char(ch->ch_tun.un_tty->port, 0, TTY_BREAK);
+				tty_flip_buffer_push(ch->ch_tun.un_tty->port);
+			}
+		}
+
+		/*
+		 * Process Transmit low.
+		 */
+		if (reason & IFTLW) {
+
+			DPR_EVENT(("event: got low event\n"));
+
+			if (ch->ch_tun.un_flags & UN_LOW) {
+				ch->ch_tun.un_flags &= ~UN_LOW;
+
+				if (ch->ch_tun.un_flags & UN_ISOPEN) {
+					if ((ch->ch_tun.un_tty->flags &
+					   (1 << TTY_DO_WRITE_WAKEUP)) &&
+						ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
+					{
+						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+						DGAP_UNLOCK(bd->bd_lock, lock_flags);
+						(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
+						DGAP_LOCK(bd->bd_lock, lock_flags);
+						DGAP_LOCK(ch->ch_lock, lock_flags2);
+					}
+					wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
+					wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+
+					DPR_EVENT(("event: Got low event. jiffies: %lu\n", jiffies));
+				}
+			}
+
+			if (ch->ch_pun.un_flags & UN_LOW) {
+				ch->ch_pun.un_flags &= ~UN_LOW;
+				if (ch->ch_pun.un_flags & UN_ISOPEN) {
+					if ((ch->ch_pun.un_tty->flags &
+					   (1 << TTY_DO_WRITE_WAKEUP)) &&
+						ch->ch_pun.un_tty->ldisc->ops->write_wakeup)
+					{
+						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+						DGAP_UNLOCK(bd->bd_lock, lock_flags);
+						(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
+						DGAP_LOCK(bd->bd_lock, lock_flags);
+						DGAP_LOCK(ch->ch_lock, lock_flags2);
+					}
+					wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
+					wake_up_interruptible(&ch->ch_pun.un_flags_wait);
+				}
+			}
+
+			if (ch->ch_flags & CH_WLOW) {
+				ch->ch_flags &= ~CH_WLOW;
+				wake_up_interruptible(&ch->ch_flags_wait);
+			}
+		}
+
+		/*
+		 * Process Transmit empty.
+		 */
+		if (reason & IFTEM) {
+			DPR_EVENT(("event: got empty event\n"));
+
+			if (ch->ch_tun.un_flags & UN_EMPTY) {
+				ch->ch_tun.un_flags &= ~UN_EMPTY;
+				if (ch->ch_tun.un_flags & UN_ISOPEN) {
+					if ((ch->ch_tun.un_tty->flags &
+					   (1 << TTY_DO_WRITE_WAKEUP)) &&
+						ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
+					{
+						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+						DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+						(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
+						DGAP_LOCK(bd->bd_lock, lock_flags);
+						DGAP_LOCK(ch->ch_lock, lock_flags2);
+					}
+					wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
+					wake_up_interruptible(&ch->ch_tun.un_flags_wait);
+				}
+			}
+
+			if (ch->ch_pun.un_flags & UN_EMPTY) {
+				ch->ch_pun.un_flags &= ~UN_EMPTY;
+				if (ch->ch_pun.un_flags & UN_ISOPEN) {
+					if ((ch->ch_pun.un_tty->flags &
+					   (1 << TTY_DO_WRITE_WAKEUP)) &&
+						ch->ch_pun.un_tty->ldisc->ops->write_wakeup)
+					{
+						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+						DGAP_UNLOCK(bd->bd_lock, lock_flags);
+						(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
+						DGAP_LOCK(bd->bd_lock, lock_flags);
+						DGAP_LOCK(ch->ch_lock, lock_flags2);
+					}
+					wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
+					wake_up_interruptible(&ch->ch_pun.un_flags_wait);
+				}
+			}
+
+
+			if (ch->ch_flags & CH_WEMPTY) {
+				ch->ch_flags &= ~CH_WEMPTY;
+				wake_up_interruptible(&ch->ch_flags_wait);
+			}
+		}
+
+		DGAP_UNLOCK(ch->ch_lock, lock_flags2);
+
+next:
+		tail = (tail + 4) & (EVMAX - EVSTART - 4);
+	}
+
+	writew(tail, &(eaddr->ev_tail));
+	DGAP_UNLOCK(bd->bd_lock, lock_flags);
+
+	return 0;
+}
diff --git a/drivers/staging/dgap/dgap_fep5.c b/drivers/staging/dgap/dgap_fep5.c
deleted file mode 100644
index fbc8a94..0000000
--- a/drivers/staging/dgap/dgap_fep5.c
+++ /dev/null
@@ -1,1902 +0,0 @@
-/*
- * Copyright 2003 Digi International (www.digi.com)
- *	Scott H Kilau <Scott_Kilau at digi dot com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- *	NOTE TO LINUX KERNEL HACKERS:  DO NOT REFORMAT THIS CODE!
- *
- *	This is shared code between Digi's CVS archive and the
- *	Linux Kernel sources.
- *	Changing the source just for reformatting needlessly breaks
- *	our CVS diff history.
- *
- *	Send any bug fixes/changes to:  Eng.Linux at digi dot com.
- *	Thank you.
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>	/* For udelay */
-#include <asm/uaccess.h>	/* For copy_from_user/copy_to_user */
-#include <linux/tty.h>
-#include <linux/tty_flip.h>	/* For tty_schedule_flip */
-#include <linux/slab.h>
-#include <linux/sched.h>
-
-#include "dgap_driver.h"
-#include "dgap_pci.h"
-#include "dgap_fep5.h"
-#include "dgap_tty.h"
-#include "dgap_conf.h"
-#include "dgap_parse.h"
-#include "dgap_trace.h"
-
-/*
- * Our function prototypes
- */
-static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds);
-static int dgap_event(struct board_t *bd);
-
-/*
- * internal variables
- */
-static uint dgap_count = 500;
-
-
-/*
- * Loads the dgap.conf config file from the user.
- */
-void dgap_do_config_load(uchar __user *uaddr, int len)
-{
-	int orig_len = len;
-	char *to_addr;
-	uchar __user *from_addr = uaddr;
-	char buf[U2BSIZE];
-	int n;
-
-	to_addr = dgap_config_buf = kzalloc(len + 1, GFP_ATOMIC);
-	if (!dgap_config_buf) {
-		DPR_INIT(("dgap_do_config_load - unable to allocate memory for file\n"));
-		dgap_driver_state = DRIVER_NEED_CONFIG_LOAD;
-		return;
-	}
-
-	n = U2BSIZE;
-	while (len) {
-
-		if (n > len)
-			n = len;
-
-		if (copy_from_user((char *) &buf, from_addr, n) == -1 )
-			return;
-
-		/* Copy data from buffer to kernel memory */
-		memcpy(to_addr, buf, n);
-
-		/* increment counts */
-		len -= n;
-		to_addr += n;
-		from_addr += n;
-		n = U2BSIZE;
-	}
-
-	dgap_config_buf[orig_len] = '\0';
-
-	to_addr = dgap_config_buf;
-	dgap_parsefile(&to_addr, TRUE);
-
-	DPR_INIT(("dgap_config_load() finish\n"));
-
-	return;
-}
-
-
-int dgap_after_config_loaded(void)
-{
-	int i = 0;
-	int rc = 0;
-
-	/*
-	 * Register our ttys, now that we have the config loaded.
-	 */
-	for (i = 0; i < dgap_NumBoards; ++i) {
-
-		/*
-		 * Initialize KME waitqueues...
-		 */
-		init_waitqueue_head(&(dgap_Board[i]->kme_wait));
-
-		/*
-		 * allocate flip buffer for board.
-		 */
-		dgap_Board[i]->flipbuf = kzalloc(MYFLIPLEN, GFP_ATOMIC);
-		dgap_Board[i]->flipflagbuf = kzalloc(MYFLIPLEN, GFP_ATOMIC);
-	}
-
-	return rc;
-}
-
-
-
-/*=======================================================================
- *
- *      usertoboard - copy from user space to board space.
- *
- *=======================================================================*/
-static int dgap_usertoboard(struct board_t *brd, char *to_addr, char __user *from_addr, int len)
-{
-	char buf[U2BSIZE];
-	int n = U2BSIZE;
-
-	if (!brd || brd->magic != DGAP_BOARD_MAGIC)
-		return -EFAULT;
-
-	while (len) {
-		if (n > len)
-			n = len;
-
-		if (copy_from_user((char *) &buf, from_addr, n) == -1 ) {
-			return -EFAULT;
-		}
-
-		/* Copy data from buffer to card memory */
-		memcpy_toio(to_addr, buf, n);
-
-		/* increment counts */
-		len -= n;
-		to_addr += n;
-		from_addr += n;
-		n = U2BSIZE;
-	}
-	return 0;
-}
-
-
-/*
- * Copies the BIOS code from the user to the board,
- * and starts the BIOS running.
- */
-void dgap_do_bios_load(struct board_t *brd, uchar __user *ubios, int len)
-{
-	uchar *addr;
-	uint offset;
-	int i;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
-		return;
-
-	DPR_INIT(("dgap_do_bios_load() start\n"));
-
-	addr = brd->re_map_membase;
-
-	/*
-	 * clear POST area
-	 */
-	for (i = 0; i < 16; i++)
-		writeb(0, addr + POSTAREA + i);
-
-	/*
-	 * Download bios
-	 */
-	offset = 0x1000;
-	if (dgap_usertoboard(brd, addr + offset, ubios, len) == -1 ) {
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-		return;
-	}
-
-	writel(0x0bf00401, addr);
-	writel(0, (addr + 4));
-
-	/* Clear the reset, and change states. */
-	writeb(FEPCLR, brd->re_map_port);
-	brd->state = WAIT_BIOS_LOAD;
-}
-
-
-/*
- * Checks to see if the BIOS completed running on the card.
- */
-static void dgap_do_wait_for_bios(struct board_t *brd)
-{
-	uchar *addr;
-	u16 word;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
-		return;
-
-	addr = brd->re_map_membase;
-	word = readw(addr + POSTAREA);
-
-	/* Check to see if BIOS thinks board is good. (GD). */
-	if (word == *(u16 *) "GD") {
-		DPR_INIT(("GOT GD in memory, moving states.\n"));
-		brd->state = FINISHED_BIOS_LOAD;
-		return;
-	}
-
-	/* Give up on board after too long of time taken */
-	if (brd->wait_for_bios++ > 5000) {
-		u16 err1 = readw(addr + SEQUENCE);
-		u16 err2 = readw(addr + ERROR);
-		APR(("***WARNING*** %s failed diagnostics.  Error #(%x,%x).\n",
-			brd->name, err1, err2));
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-	}
-}
-
-
-/*
- * Copies the FEP code from the user to the board,
- * and starts the FEP running.
- */
-void dgap_do_fep_load(struct board_t *brd, uchar __user *ufep, int len)
-{
-	uchar *addr;
-	uint offset;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
-		return;
-
-	addr = brd->re_map_membase;
-
-	DPR_INIT(("dgap_do_fep_load() for board %s : start\n", brd->name));
-
-	/*
-	 * Download FEP
-	 */
-	offset = 0x1000;
-	if (dgap_usertoboard(brd, addr + offset, ufep, len) == -1 ) {
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-		return;
-	}
-
-	/*
-	 * If board is a concentrator product, we need to give
-	 * it its config string describing how the concentrators look.
-	 */
-	if ((brd->type == PCX) || (brd->type == PEPC)) {
-		uchar string[100];
-		uchar *config, *xconfig;
-		int i = 0;
-
-		xconfig = dgap_create_config_string(brd, string);
-
-		/* Write string to board memory */
-		config = addr + CONFIG;
-		for (; i < CONFIGSIZE; i++, config++, xconfig++) {
-			writeb(*xconfig, config);
-			if ((*xconfig & 0xff) == 0xff)
-				break;
-		}
-	}
-
-	writel(0xbfc01004, (addr + 0xc34));
-	writel(0x3, (addr + 0xc30));
-
-	/* change states. */
-	brd->state = WAIT_FEP_LOAD;
-
-	DPR_INIT(("dgap_do_fep_load() for board %s : finish\n", brd->name));
-
-}
-
-
-/*
- * Waits for the FEP to report thats its ready for us to use.
- */
-static void dgap_do_wait_for_fep(struct board_t *brd)
-{
-	uchar *addr;
-	u16 word;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
-		return;
-
-	addr = brd->re_map_membase;
-
-	DPR_INIT(("dgap_do_wait_for_fep() for board %s : start. addr: %p\n", brd->name, addr));
-
-	word = readw(addr + FEPSTAT);
-
-	/* Check to see if FEP is up and running now. */
-	if (word == *(u16 *) "OS") {
-		DPR_INIT(("GOT OS in memory for board %s, moving states.\n", brd->name));
-		brd->state = FINISHED_FEP_LOAD;
-
-		/*
-		 * Check to see if the board can support FEP5+ commands.
-		 */
-		word = readw(addr + FEP5_PLUS);
-		if (word == *(u16 *) "5A") {
-			DPR_INIT(("GOT 5A in memory for board %s, board supports extended FEP5 commands.\n", brd->name));
-			brd->bd_flags |= BD_FEP5PLUS;
-		}
-
-		return;
-	}
-
-	/* Give up on board after too long of time taken */
-	if (brd->wait_for_fep++ > 5000) {
-		u16 err1 = readw(addr + SEQUENCE);
-		u16 err2 = readw(addr + ERROR);
-		APR(("***WARNING*** FEPOS for %s not functioning.  Error #(%x,%x).\n",
-			brd->name, err1, err2));
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-	}
-
-	DPR_INIT(("dgap_do_wait_for_fep() for board %s : finish\n", brd->name));
-}
-
-
-/*
- * Physically forces the FEP5 card to reset itself.
- */
-static void dgap_do_reset_board(struct board_t *brd)
-{
-	uchar check;
-	u32 check1;
-	u32 check2;
-	int i = 0;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase || !brd->re_map_port) {
-		DPR_INIT(("dgap_do_reset_board() start. bad values. brd: %p mem: %p io: %p\n",
-			brd, brd ? brd->re_map_membase : 0, brd ? brd->re_map_port : 0));
-		return;
-	}
-
-	DPR_INIT(("dgap_do_reset_board() start. io: %p\n", brd->re_map_port));
-
-	/* FEPRST does not vary among supported boards */
-	writeb(FEPRST, brd->re_map_port);
-
-	for (i = 0; i <= 1000; i++) {
-		check = readb(brd->re_map_port) & 0xe;
-		if (check == FEPRST)
-			break;
-		udelay(10);
-
-	}
-	if (i > 1000) {
-		APR(("*** WARNING *** Board not resetting...  Failing board.\n"));
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-		goto failed;
-	}
-
-	/*
-	 * Make sure there really is memory out there.
-	 */
-	writel(0xa55a3cc3, (brd->re_map_membase + LOWMEM));
-	writel(0x5aa5c33c, (brd->re_map_membase + HIGHMEM));
-	check1 = readl(brd->re_map_membase + LOWMEM);
-	check2 = readl(brd->re_map_membase + HIGHMEM);
-
-	if ((check1 != 0xa55a3cc3) || (check2 != 0x5aa5c33c)) {
-		APR(("*** Warning *** No memory at %p for board.\n", brd->re_map_membase));
-		brd->state = BOARD_FAILED;
-		brd->dpastatus = BD_NOFEP;
-		goto failed;
-	}
-
-	if (brd->state != BOARD_FAILED)
-		brd->state = FINISHED_RESET;
-
-failed:
-	DPR_INIT(("dgap_do_reset_board() finish\n"));
-}
-
-
-/*
- * Sends a concentrator image into the FEP5 board.
- */
-void dgap_do_conc_load(struct board_t *brd, uchar *uaddr, int len)
-{
-	char *vaddr;
-	u16 offset = 0;
-	struct downld_t *to_dp;
-
-	if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase)
-		return;
-
-	vaddr = brd->re_map_membase;
-
-	offset = readw((u16 *) (vaddr + DOWNREQ));
-	to_dp = (struct downld_t *) (vaddr + (int) offset);
-
-	/*
-	 * The image was already read into kernel space,
-	 * we do NOT need a user space read here
-	 */
-	memcpy_toio((char *) to_dp, uaddr, sizeof(struct downld_t));
-
-	/* Tell card we have data for it */
-	writew(0, vaddr + (DOWNREQ));
-
-	brd->conc_dl_status = NO_PENDING_CONCENTRATOR_REQUESTS;
-}
-
-
-#define EXPANSION_ROM_SIZE	(64 * 1024)
-#define FEP5_ROM_MAGIC		(0xFEFFFFFF)
-
-static void dgap_get_vpd(struct board_t *brd)
-{
-	u32 magic;
-	u32 base_offset;
-	u16 rom_offset;
-	u16 vpd_offset;
-	u16 image_length;
-	u16 i;
-	uchar byte1;
-	uchar byte2;
-
-	/*
-	 * Poke the magic number at the PCI Rom Address location.
-	 * If VPD is supported, the value read from that address
-	 * will be non-zero.
-	 */
-	magic = FEP5_ROM_MAGIC;
-	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
-	pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
-
-	/* VPD not supported, bail */
-	if (!magic)
-		return;
-
-	/*
-	 * To get to the OTPROM memory, we have to send the boards base
-	 * address or'ed with 1 into the PCI Rom Address location.
-	 */
-	magic = brd->membase | 0x01;
-	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
-	pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic);
-
-	byte1 = readb(brd->re_map_membase);
-	byte2 = readb(brd->re_map_membase + 1);
-
-	/*
-	 * If the board correctly swapped to the OTPROM memory,
-	 * the first 2 bytes (header) should be 0x55, 0xAA
-	 */
-	if (byte1 == 0x55 && byte2 == 0xAA) {
-
-		base_offset = 0;
-
-		/*
-		 * We have to run through all the OTPROM memory looking
-		 * for the VPD offset.
-		 */
-		while (base_offset <= EXPANSION_ROM_SIZE) {
-
-			/*
-			 * Lots of magic numbers here.
-			 *
-			 * The VPD offset is located inside the ROM Data Structure.
-			 * We also have to remember the length of each
-			 * ROM Data Structure, so we can "hop" to the next
-			 * entry if the VPD isn't in the current
-			 * ROM Data Structure.
-			 */
-			rom_offset = readw(brd->re_map_membase + base_offset + 0x18);
-			image_length = readw(brd->re_map_membase + rom_offset + 0x10) * 512;
-			vpd_offset = readw(brd->re_map_membase + rom_offset + 0x08);
-
-			/* Found the VPD entry */
-			if (vpd_offset)
-				break;
-
-			/* We didn't find a VPD entry, go to next ROM entry. */
-			base_offset += image_length;
-
-			byte1 = readb(brd->re_map_membase + base_offset);
-			byte2 = readb(brd->re_map_membase + base_offset + 1);
-
-			/*
-			 * If the new ROM offset doesn't have 0x55, 0xAA
-			 * as its header, we have run out of ROM.
-			 */
-			if (byte1 != 0x55 || byte2 != 0xAA)
-				break;
-		}
-
-		/*
-		 * If we have a VPD offset, then mark the board
-		 * as having a valid VPD, and copy VPDSIZE (512) bytes of
-		 * that VPD to the buffer we have in our board structure.
-		 */
-		if (vpd_offset) {
-			brd->bd_flags |= BD_HAS_VPD;
-			for (i = 0; i < VPDSIZE; i++)
-				brd->vpd[i] = readb(brd->re_map_membase + vpd_offset + i);
-		}
-	}
-
-	/*
-	 * We MUST poke the magic number at the PCI Rom Address location again.
-	 * This makes the card report the regular board memory back to us,
-	 * rather than the OTPROM memory.
-	 */
-	magic = FEP5_ROM_MAGIC;
-	pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic);
-}
-
-
-/*
- * Our board poller function.
- */
-void dgap_poll_tasklet(unsigned long data)
-{
-	struct board_t *bd = (struct board_t *) data;
-	ulong  lock_flags;
-	ulong  lock_flags2;
-	char *vaddr;
-	u16 head, tail;
-	u16 *chk_addr;
-	u16 check = 0;
-
-	if (!bd || (bd->magic != DGAP_BOARD_MAGIC)) {
-		APR(("dgap_poll_tasklet() - NULL or bad bd.\n"));
-		return;
-	}
-
-	if (bd->inhibit_poller)
-		return;
-
-	DGAP_LOCK(bd->bd_lock, lock_flags);
-
-	vaddr = bd->re_map_membase;
-
-	/*
-	 * If board is ready, parse deeper to see if there is anything to do.
-	 */
-	if (bd->state == BOARD_READY) {
-
-		struct ev_t *eaddr = NULL;
-
-		if (!bd->re_map_membase) {
-			DGAP_UNLOCK(bd->bd_lock, lock_flags);
-			return;
-		}
-		if (!bd->re_map_port) {
-			DGAP_UNLOCK(bd->bd_lock, lock_flags);
-			return;
-		}
-
-		if (!bd->nasync) {
-			goto out;
-		}
-
-		/*
-		 * If this is a CX or EPCX, we need to see if the firmware
-		 * is requesting a concentrator image from us.
-		 */
-		if ((bd->type == PCX) || (bd->type == PEPC)) {
-			chk_addr = (u16 *) (vaddr + DOWNREQ);
-			check = readw(chk_addr);
-			/* Nonzero if FEP is requesting concentrator image. */
-			if (check) {
-				if (bd->conc_dl_status == NO_PENDING_CONCENTRATOR_REQUESTS)
-					bd->conc_dl_status = NEED_CONCENTRATOR;
-				/*
-				 * Signal downloader, its got some work to do.
-				 */
-				DGAP_LOCK(dgap_dl_lock, lock_flags2);
-				if (dgap_dl_action != 1) {
-					dgap_dl_action = 1;
-					wake_up_interruptible(&dgap_dl_wait);
-				}
-				DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
-
-			}
-		}
-
-		eaddr = (struct ev_t *) (vaddr + EVBUF);
-
-		/* Get our head and tail */
-		head = readw(&(eaddr->ev_head));
-		tail = readw(&(eaddr->ev_tail));
-
-		/*
-		 * If there is an event pending. Go service it.
-		 */
-		if (head != tail) {
-			DGAP_UNLOCK(bd->bd_lock, lock_flags);
-			dgap_event(bd);
-			DGAP_LOCK(bd->bd_lock, lock_flags);
-		}
-
-out:
-		/*
-		 * If board is doing interrupts, ACK the interrupt.
-		 */
-		if (bd && bd->intr_running) {
-			readb(bd->re_map_port + 2);
-		}
-
-		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return;
-	}
-
-	/* Our state machine to get the board up and running */
-
-	/* Reset board */
-	if (bd->state == NEED_RESET) {
-
-		/* Get VPD info */
-		dgap_get_vpd(bd);
-
-		dgap_do_reset_board(bd);
-	}
-
-	/* Move to next state */
-	if (bd->state == FINISHED_RESET) {
-		bd->state = NEED_CONFIG;
-	}
-
-	if (bd->state == NEED_CONFIG) {
-		/*
-		 * Match this board to a config the user created for us.
-		 */
-		bd->bd_config = dgap_find_config(bd->type, bd->pci_bus, bd->pci_slot);
-
-		/*
-		 * Because the 4 port Xr products share the same PCI ID
-		 * as the 8 port Xr products, if we receive a NULL config
-		 * back, and this is a PAPORT8 board, retry with a
-		 * PAPORT4 attempt as well.
-		 */
-		if (bd->type == PAPORT8 && !bd->bd_config) {
-			bd->bd_config = dgap_find_config(PAPORT4, bd->pci_bus, bd->pci_slot);
-		}
-
-		/*
-		 * Register the ttys (if any) into the kernel.
-		 */
-		if (bd->bd_config) {
-			bd->state = FINISHED_CONFIG;
-		}
-		else {
-			bd->state = CONFIG_NOT_FOUND;
-		}
-	}
-
-	/* Move to next state */
-	if (bd->state == FINISHED_CONFIG) {
-		bd->state = NEED_DEVICE_CREATION;
-	}
-
-	/* Move to next state */
-	if (bd->state == NEED_DEVICE_CREATION) {
-		/*
-		 * Signal downloader, its got some work to do.
-		 */
-		DGAP_LOCK(dgap_dl_lock, lock_flags2);
-		if (dgap_dl_action != 1) {
-			dgap_dl_action = 1;
-			wake_up_interruptible(&dgap_dl_wait);
-		}
-		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
-	}
-
-	/* Move to next state */
-	if (bd->state == FINISHED_DEVICE_CREATION) {
-		bd->state = NEED_BIOS_LOAD;
-	}
-
-	/* Move to next state */
-	if (bd->state == NEED_BIOS_LOAD) {
-		/*
-		 * Signal downloader, its got some work to do.
-		 */
-		DGAP_LOCK(dgap_dl_lock, lock_flags2);
-		if (dgap_dl_action != 1) {
-			dgap_dl_action = 1;
-			wake_up_interruptible(&dgap_dl_wait);
-		}
-		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
-	}
-
-	/* Wait for BIOS to test board... */
-	if (bd->state == WAIT_BIOS_LOAD) {
-		dgap_do_wait_for_bios(bd);
-	}
-
-	/* Move to next state */
-	if (bd->state == FINISHED_BIOS_LOAD) {
-		bd->state = NEED_FEP_LOAD;
-
-		/*
-		 * Signal downloader, its got some work to do.
-		 */
-		DGAP_LOCK(dgap_dl_lock, lock_flags2);
-		if (dgap_dl_action != 1) {
-			dgap_dl_action = 1;
-			wake_up_interruptible(&dgap_dl_wait);
-		}
-		DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
-	}
-
-	/* Wait for FEP to load on board... */
-	if (bd->state == WAIT_FEP_LOAD) {
-		dgap_do_wait_for_fep(bd);
-	}
-
-
-	/* Move to next state */
-	if (bd->state == FINISHED_FEP_LOAD) {
-
-		/*
-		 * Do tty device initialization.
-		 */
-		int rc = dgap_tty_init(bd);
-
-		if (rc < 0) {
-			dgap_tty_uninit(bd);
-			APR(("Can't init tty devices (%d)\n", rc));
-			bd->state = BOARD_FAILED;
-			bd->dpastatus = BD_NOFEP;
-		}
-		else {
-			bd->state = NEED_PROC_CREATION;
-
-			/*
-			 * Signal downloader, its got some work to do.
-			 */
-			DGAP_LOCK(dgap_dl_lock, lock_flags2);
-			if (dgap_dl_action != 1) {
-				dgap_dl_action = 1;
-				wake_up_interruptible(&dgap_dl_wait);
-			}
-			DGAP_UNLOCK(dgap_dl_lock, lock_flags2);
-		}
-	}
-
-	/* Move to next state */
-	if (bd->state == FINISHED_PROC_CREATION) {
-
-		bd->state = BOARD_READY;
-		bd->dpastatus = BD_RUNNING;
-
-		/*
-		 * If user requested the board to run in interrupt mode,
-		 * go and set it up on the board.
-		 */
-		if (bd->intr_used) {
-			writew(1, (bd->re_map_membase + ENABLE_INTR));
-			/*
-			 * Tell the board to poll the UARTS as fast as possible.
-			 */
-			writew(FEPPOLL_MIN, (bd->re_map_membase + FEPPOLL));
-			bd->intr_running = 1;
-		}
-
-		/* Wake up anyone waiting for board state to change to ready */
-		wake_up_interruptible(&bd->state_wait);
-	}
-
-	DGAP_UNLOCK(bd->bd_lock, lock_flags);
-}
-
-
-/*=======================================================================
- *
- *      dgap_cmdb - Sends a 2 byte command to the FEP.
- *
- *              ch      - Pointer to channel structure.
- *              cmd     - Command to be sent.
- *              byte1   - Integer containing first byte to be sent.
- *              byte2   - Integer containing second byte to be sent.
- *              ncmds   - Wait until ncmds or fewer cmds are left
- *                        in the cmd buffer before returning.
- *
- *=======================================================================*/
-void dgap_cmdb(struct channel_t *ch, uchar cmd, uchar byte1, uchar byte2, uint ncmds)
-{
-	char		*vaddr = NULL;
-	struct cm_t	*cm_addr = NULL;
-	uint		count;
-	uint		n;
-	u16		head;
-	u16		tail;
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * Check if board is still alive.
-	 */
-	if (ch->ch_bd->state == BOARD_FAILED) {
-		DPR_CORE(("%s:%d board is in failed state.\n", __FILE__, __LINE__));
-		return;
-	}
-
-	/*
-	 * Make sure the pointers are in range before
-	 * writing to the FEP memory.
-	 */
-	vaddr = ch->ch_bd->re_map_membase;
-
-	if (!vaddr)
-		return;
-
-	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
-	head = readw(&(cm_addr->cm_head));
-
-	/*
-	 * Forget it if pointers out of range.
-	 */
-	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
-		DPR_CORE(("%s:%d pointers out of range, failing board!\n", __FILE__, __LINE__));
-		ch->ch_bd->state = BOARD_FAILED;
-		return;
-	}
-
-	/*
-	 * Put the data in the circular command buffer.
-	 */
-	writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
-	writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
-	writeb(byte1, (char *) (vaddr + head + CMDSTART + 2));
-	writeb(byte2, (char *) (vaddr + head + CMDSTART + 3));
-
-	head = (head + 4) & (CMDMAX - CMDSTART - 4);
-
-	writew(head, &(cm_addr->cm_head));
-
-	/*
-	 * Wait if necessary before updating the head
-	 * pointer to limit the number of outstanding
-	 * commands to the FEP.   If the time spent waiting
-	 * is outlandish, declare the FEP dead.
-	 */
-	for (count = dgap_count ;;) {
-
-		head = readw(&(cm_addr->cm_head));
-		tail = readw(&(cm_addr->cm_tail));
-
-		n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
-		if (n <= ncmds * sizeof(struct cm_t))
-			break;
-
-		if (--count == 0) {
-			DPR_CORE(("%s:%d failing board.\n",__FILE__, __LINE__));
-			ch->ch_bd->state = BOARD_FAILED;
-			return;
-		}
-		udelay(10);
-	}
-}
-
-
-/*=======================================================================
- *
- *      dgap_cmdw - Sends a 1 word command to the FEP.
- *
- *              ch      - Pointer to channel structure.
- *              cmd     - Command to be sent.
- *              word    - Integer containing word to be sent.
- *              ncmds   - Wait until ncmds or fewer cmds are left
- *                        in the cmd buffer before returning.
- *
- *=======================================================================*/
-void dgap_cmdw(struct channel_t *ch, uchar cmd, u16 word, uint ncmds)
-{
-	char		*vaddr = NULL;
-	struct cm_t	*cm_addr = NULL;
-	uint		count;
-	uint		n;
-	u16		head;
-	u16		tail;
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * Check if board is still alive.
-	 */
-	if (ch->ch_bd->state == BOARD_FAILED) {
-		DPR_CORE(("%s:%d board is failed!\n", __FILE__, __LINE__));
-		return;
-	}
-
-	/*
-	 * Make sure the pointers are in range before
-	 * writing to the FEP memory.
-	 */
-	vaddr = ch->ch_bd->re_map_membase;
-	if (!vaddr)
-		return;
-
-	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
-	head = readw(&(cm_addr->cm_head));
-
-	/*
-	 * Forget it if pointers out of range.
-	 */
-	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
-		DPR_CORE(("%s:%d Pointers out of range.  Failing board.\n",__FILE__, __LINE__));
-		ch->ch_bd->state = BOARD_FAILED;
-		return;
-	}
-
-	/*
-	 * Put the data in the circular command buffer.
-	 */
-	writeb(cmd, (char *) (vaddr + head + CMDSTART + 0));
-	writeb((uchar) ch->ch_portnum, (char *) (vaddr + head + CMDSTART + 1));
-	writew((u16) word, (char *) (vaddr + head + CMDSTART + 2));
-
-	head = (head + 4) & (CMDMAX - CMDSTART - 4);
-
-	writew(head, &(cm_addr->cm_head));
-
-	/*
-	 * Wait if necessary before updating the head
-	 * pointer to limit the number of outstanding
-	 * commands to the FEP.   If the time spent waiting
-	 * is outlandish, declare the FEP dead.
-	 */
-	for (count = dgap_count ;;) {
-
-		head = readw(&(cm_addr->cm_head));
-		tail = readw(&(cm_addr->cm_tail));
-
-		n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
-		if (n <= ncmds * sizeof(struct cm_t))
-			break;
-
-		if (--count == 0) {
-			DPR_CORE(("%s:%d Failing board.\n",__FILE__, __LINE__));
-			ch->ch_bd->state = BOARD_FAILED;
-			return;
-		}
-		udelay(10);
-	}
-}
-
-
-
-/*=======================================================================
- *
- *      dgap_cmdw_ext - Sends a extended word command to the FEP.
- *
- *              ch      - Pointer to channel structure.
- *              cmd     - Command to be sent.
- *              word    - Integer containing word to be sent.
- *              ncmds   - Wait until ncmds or fewer cmds are left
- *                        in the cmd buffer before returning.
- *
- *=======================================================================*/
-static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds)
-{
-	char		*vaddr = NULL;
-	struct cm_t	*cm_addr = NULL;
-	uint		count;
-	uint		n;
-	u16		head;
-	u16		tail;
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * Check if board is still alive.
-	 */
-	if (ch->ch_bd->state == BOARD_FAILED) {
-		DPR_CORE(("%s:%d board is failed!\n", __FILE__, __LINE__));
-		return;
-	}
-
-	/*
-	 * Make sure the pointers are in range before
-	 * writing to the FEP memory.
-	 */
-	vaddr = ch->ch_bd->re_map_membase;
-	if (!vaddr)
-		return;
-
-	cm_addr = (struct cm_t *) (vaddr + CMDBUF);
-	head = readw(&(cm_addr->cm_head));
-
-	/*
-	 * Forget it if pointers out of range.
-	 */
-	if (head >= (CMDMAX - CMDSTART) || (head & 03)) {
-		DPR_CORE(("%s:%d Pointers out of range.  Failing board.\n",__FILE__, __LINE__));
-		ch->ch_bd->state = BOARD_FAILED;
-		return;
-	}
-
-	/*
-	 * Put the data in the circular command buffer.
-	 */
-
-	/* Write an FF to tell the FEP that we want an extended command */
-	writeb((uchar) 0xff, (char *) (vaddr + head + CMDSTART + 0));
-
-	writeb((uchar) ch->ch_portnum, (uchar *) (vaddr + head + CMDSTART + 1));
-	writew((u16) cmd, (char *) (vaddr + head + CMDSTART + 2));
-
-	/*
-	 * If the second part of the command won't fit,
-	 * put it at the beginning of the circular buffer.
-	 */
-	if (((head + 4) >= ((CMDMAX - CMDSTART)) || (head & 03))) {
-		writew((u16) word, (char *) (vaddr + CMDSTART));
-	} else {
-		writew((u16) word, (char *) (vaddr + head + CMDSTART + 4));
-	}
-
-	head = (head + 8) & (CMDMAX - CMDSTART - 4);
-
-	writew(head, &(cm_addr->cm_head));
-
-	/*
-	 * Wait if necessary before updating the head
-	 * pointer to limit the number of outstanding
-	 * commands to the FEP.   If the time spent waiting
-	 * is outlandish, declare the FEP dead.
-	 */
-	for (count = dgap_count ;;) {
-
-		head = readw(&(cm_addr->cm_head));
-		tail = readw(&(cm_addr->cm_tail));
-
-		n = (head - tail) & (CMDMAX - CMDSTART - 4);
-
-		if (n <= ncmds * sizeof(struct cm_t))
-			break;
-
-		if (--count == 0) {
-			DPR_CORE(("%s:%d Failing board.\n",__FILE__, __LINE__));
-			ch->ch_bd->state = BOARD_FAILED;
-			return;
-		}
-		udelay(10);
-	}
-}
-
-
-/*=======================================================================
- *
- *      dgap_wmove - Write data to FEP buffer.
- *
- *              ch      - Pointer to channel structure.
- *              buf     - Poiter to characters to be moved.
- *              cnt     - Number of characters to move.
- *
- *=======================================================================*/
-void dgap_wmove(struct channel_t *ch, char *buf, uint cnt)
-{
-	int    n;
-	char   *taddr;
-	struct bs_t    *bs;
-	u16    head;
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return;
-
-	/*
-	 * Check parameters.
-	 */
-	bs   = ch->ch_bs;
-	head = readw(&(bs->tx_head));
-
-	/*
-	 * If pointers are out of range, just return.
-	 */
-	if ((cnt > ch->ch_tsize) || (unsigned)(head - ch->ch_tstart) >= ch->ch_tsize) {
-		DPR_CORE(("%s:%d pointer out of range", __FILE__, __LINE__));
-		return;
-	}
-
-	/*
-	 * If the write wraps over the top of the circular buffer,
-	 * move the portion up to the wrap point, and reset the
-	 * pointers to the bottom.
-	 */
-	n = ch->ch_tstart + ch->ch_tsize - head;
-
-	if (cnt >= n) {
-		cnt -= n;
-		taddr = ch->ch_taddr + head;
-		memcpy_toio(taddr, buf, n);
-		head = ch->ch_tstart;
-		buf += n;
-	}
-
-	/*
-	 * Move rest of data.
-	 */
-	taddr = ch->ch_taddr + head;
-	n = cnt;
-	memcpy_toio(taddr, buf, n);
-	head += cnt;
-
-	writew(head, &(bs->tx_head));
-}
-
-/*
- * Retrives the current custom baud rate from FEP memory,
- * and returns it back to the user.
- * Returns 0 on error.
- */
-uint dgap_get_custom_baud(struct channel_t *ch)
-{
-	uchar *vaddr;
-	ulong offset = 0;
-	uint value = 0;
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
-		return 0;
-	}
-
-	if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC) {
-		return 0;
-	}
-
-	if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS))
-		return 0;
-
-	vaddr = ch->ch_bd->re_map_membase;
-
-	if (!vaddr)
-		return 0;
-
-	/*
-	 * Go get from fep mem, what the fep
-	 * believes the custom baud rate is.
-	 */
-	offset = ((((*(unsigned short *)(vaddr + ECS_SEG)) << 4) +
-		(ch->ch_portnum * 0x28) + LINE_SPEED));
-
-	value = readw(vaddr + offset);
-	return value;
-}
-
-
-/*
- * Calls the firmware to reset this channel.
- */
-void dgap_firmware_reset_port(struct channel_t *ch)
-{
-	dgap_cmdb(ch, CHRESET, 0, 0, 0);
-
-	/*
-	 * Now that the channel is reset, we need to make sure
-	 * all the current settings get reapplied to the port
-	 * in the firmware.
-	 *
-	 * So we will set the driver's cache of firmware
-	 * settings all to 0, and then call param.
-	 */
-	ch->ch_fepiflag = 0;
-	ch->ch_fepcflag = 0;
-	ch->ch_fepoflag = 0;
-	ch->ch_fepstartc = 0;
-	ch->ch_fepstopc = 0;
-	ch->ch_fepastartc = 0;
-	ch->ch_fepastopc = 0;
-	ch->ch_mostat = 0;
-	ch->ch_hflow = 0;
-}
-
-
-/*=======================================================================
- *
- *      dgap_param - Set Digi parameters.
- *
- *              struct tty_struct *     - TTY for port.
- *
- *=======================================================================*/
-int dgap_param(struct tty_struct *tty)
-{
-	struct ktermios *ts;
-	struct board_t *bd;
-	struct channel_t *ch;
-	struct bs_t   *bs;
-	struct un_t   *un;
-	u16	head;
-	u16	cflag;
-	u16	iflag;
-	uchar	mval;
-	uchar	hflow;
-
-	if (!tty || tty->magic != TTY_MAGIC)
-		return -ENXIO;
-
-	un = (struct un_t *) tty->driver_data;
-	if (!un || un->magic != DGAP_UNIT_MAGIC)
-		return -ENXIO;
-
-	ch = un->un_ch;
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return -ENXIO;
-
-	bd = ch->ch_bd;
-	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
-		return -ENXIO;
-
-	bs = ch->ch_bs;
-	if (!bs)
-		return -ENXIO;
-
-	DPR_PARAM(("param start: tdev: %x cflags: %x oflags: %x iflags: %x\n",
-		ch->ch_tun.un_dev, ch->ch_c_cflag, ch->ch_c_oflag, ch->ch_c_iflag));
-
-	ts = &tty->termios;
-
-	/*
-	 * If baud rate is zero, flush queues, and set mval to drop DTR.
-	 */
-	if ((ch->ch_c_cflag & (CBAUD)) == 0) {
-
-		/* flush rx */
-		head = readw(&(ch->ch_bs->rx_head));
-		writew(head, &(ch->ch_bs->rx_tail));
-
-		/* flush tx */
-		head = readw(&(ch->ch_bs->tx_head));
-		writew(head, &(ch->ch_bs->tx_tail));
-
-		ch->ch_flags |= (CH_BAUD0);
-
-		/* Drop RTS and DTR */
-		ch->ch_mval &= ~(D_RTS(ch)|D_DTR(ch));
-		mval = D_DTR(ch) | D_RTS(ch);
-		ch->ch_baud_info = 0;
-
-	} else if (ch->ch_custom_speed && (bd->bd_flags & BD_FEP5PLUS)) {
-		/*
-		 * Tell the fep to do the command
-		 */
-
-		DPR_PARAM(("param: Want %d speed\n", ch->ch_custom_speed));
-
-		dgap_cmdw_ext(ch, 0xff01, ch->ch_custom_speed, 0);
-
-		/*
-		 * Now go get from fep mem, what the fep
-		 * believes the custom baud rate is.
-		 */
-		ch->ch_baud_info = ch->ch_custom_speed = dgap_get_custom_baud(ch);
-
-		DPR_PARAM(("param: Got %d speed\n", ch->ch_custom_speed));
-
-		/* Handle transition from B0 */
-		if (ch->ch_flags & CH_BAUD0) {
-			ch->ch_flags &= ~(CH_BAUD0);
-			ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
-		}
-		mval = D_DTR(ch) | D_RTS(ch);
-
-	} else {
-		/*
-		 * Set baud rate, character size, and parity.
-		 */
-
-
-		int iindex = 0;
-		int jindex = 0;
-		int baud = 0;
-
-		ulong bauds[4][16] = {
-			{ /* slowbaud */
-				0,	50,	75,	110,
-				134,	150,	200,	300,
-				600,	1200,	1800,	2400,
-				4800,	9600,	19200,	38400 },
-			{ /* slowbaud & CBAUDEX */
-				0,	57600,	115200,	230400,
-				460800,	150,	200,	921600,
-				600,	1200,	1800,	2400,
-				4800,	9600,	19200,	38400 },
-			{ /* fastbaud */
-				0,	57600,	76800,	115200,
-				14400,	57600,	230400,	76800,
-				115200,	230400,	28800,	460800,
-				921600,	9600,	19200,	38400 },
-			{ /* fastbaud & CBAUDEX */
-				0,	57600,	115200,	230400,
-				460800,	150,	200,	921600,
-				600,	1200,	1800,	2400,
-				4800,	9600,	19200,	38400 }
-		};
-
-		/* Only use the TXPrint baud rate if the terminal unit is NOT open */
-		if (!(ch->ch_tun.un_flags & UN_ISOPEN) && (un->un_type == DGAP_PRINT))
-			baud = C_BAUD(ch->ch_pun.un_tty) & 0xff;
-		else
-			baud = C_BAUD(ch->ch_tun.un_tty) & 0xff;
-
-		if (ch->ch_c_cflag & CBAUDEX)
-			iindex = 1;
-
-		if (ch->ch_digi.digi_flags & DIGI_FAST)
-			iindex += 2;
-
-		jindex = baud;
-
-		if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16)) {
-			baud = bauds[iindex][jindex];
-		} else {
-			DPR_IOCTL(("baud indices were out of range (%d)(%d)",
-				iindex, jindex));
-			baud = 0;
-		}
-
-		if (baud == 0)
-			baud = 9600;
-
-		ch->ch_baud_info = baud;
-
-
-		/*
-		 * CBAUD has bit position 0x1000 set these days to indicate Linux
-		 * baud rate remap.
-		 * We use a different bit assignment for high speed.  Clear this
-		 * bit out while grabbing the parts of "cflag" we want.
-		 */
-		cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
-
-		/*
-		 * HUPCL bit is used by FEP to indicate fast baud
-		 * table is to be used.
-		 */
-		if ((ch->ch_digi.digi_flags & DIGI_FAST) || (ch->ch_c_cflag & CBAUDEX))
-			cflag |= HUPCL;
-
-
-		if ((ch->ch_c_cflag & CBAUDEX) && !(ch->ch_digi.digi_flags & DIGI_FAST)) {
-		/*
-		 * The below code is trying to guarantee that only baud rates
-		 * 115200, 230400, 460800, 921600 are remapped.  We use exclusive or
-		 * because the various baud rates share common bit positions
-		 * and therefore can't be tested for easily.
-		 */
-			tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX;
-			int baudpart = 0;
-
-			/* Map high speed requests to index into FEP's baud table */
-			switch (tcflag) {
-			case B57600 :
-				baudpart = 1;
-				break;
-#ifdef B76800
-			case B76800 :
-				baudpart = 2;
-				break;
-#endif
-			case B115200 :
-				baudpart = 3;
-				break;
-			case B230400 :
-				baudpart = 9;
-				break;
-			case B460800 :
-				baudpart = 11;
-				break;
-#ifdef B921600
-			case B921600 :
-				baudpart = 12;
-				break;
-#endif
-			default:
-				baudpart = 0;
-			}
-
-			if (baudpart)
-				cflag = (cflag & ~(CBAUD | CBAUDEX)) | baudpart;
-		}
-
-		cflag &= 0xffff;
-
-		if (cflag != ch->ch_fepcflag) {
-			ch->ch_fepcflag = (u16) (cflag & 0xffff);
-
-			/* Okay to have channel and board locks held calling this */
-			dgap_cmdw(ch, SCFLAG, (u16) cflag, 0);
-		}
-
-		/* Handle transition from B0 */
-		if (ch->ch_flags & CH_BAUD0) {
-			ch->ch_flags &= ~(CH_BAUD0);
-			ch->ch_mval |= (D_RTS(ch)|D_DTR(ch));
-		}
-		mval = D_DTR(ch) | D_RTS(ch);
-	}
-
-	/*
-	 * Get input flags.
-	 */
-	iflag = ch->ch_c_iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | INPCK | ISTRIP | IXON | IXANY | IXOFF);
-
-	if ((ch->ch_startc == _POSIX_VDISABLE) || (ch->ch_stopc == _POSIX_VDISABLE)) {
-		iflag &= ~(IXON | IXOFF);
-		ch->ch_c_iflag &= ~(IXON | IXOFF);
-	}
-
-	/*
-	 * Only the IBM Xr card can switch between
-	 * 232 and 422 modes on the fly
-	 */
-	if (bd->device == PCI_DEVICE_XR_IBM_DID) {
-		if (ch->ch_digi.digi_flags & DIGI_422)
-			dgap_cmdb(ch, SCOMMODE, MODE_422, 0, 0);
-		else
-			dgap_cmdb(ch, SCOMMODE, MODE_232, 0, 0);
-	}
-
-	if (ch->ch_digi.digi_flags & DIGI_ALTPIN)
-		iflag |= IALTPIN ;
-
-	if (iflag != ch->ch_fepiflag) {
-		ch->ch_fepiflag = iflag;
-
-		/* Okay to have channel and board locks held calling this */
-		dgap_cmdw(ch, SIFLAG, (u16) ch->ch_fepiflag, 0);
-	}
-
-	/*
-	 * Select hardware handshaking.
-	 */
-	hflow = 0;
-
-	if (ch->ch_c_cflag & CRTSCTS) {
-		hflow |= (D_RTS(ch) | D_CTS(ch));
-	}
-	if (ch->ch_digi.digi_flags & RTSPACE)
-		hflow |= D_RTS(ch);
-	if (ch->ch_digi.digi_flags & DTRPACE)
-		hflow |= D_DTR(ch);
-	if (ch->ch_digi.digi_flags & CTSPACE)
-		hflow |= D_CTS(ch);
-	if (ch->ch_digi.digi_flags & DSRPACE)
-		hflow |= D_DSR(ch);
-	if (ch->ch_digi.digi_flags & DCDPACE)
-		hflow |= D_CD(ch);
-
-	if (hflow != ch->ch_hflow) {
-		ch->ch_hflow = hflow;
-
-		/* Okay to have channel and board locks held calling this */
-		dgap_cmdb(ch, SHFLOW, (uchar) hflow, 0xff, 0);
-	}
-
-
-	/*
-	 * Set RTS and/or DTR Toggle if needed, but only if product is FEP5+ based.
-	 */
-	if (bd->bd_flags & BD_FEP5PLUS) {
-		u16 hflow2 = 0;
-		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {
-			hflow2 |= (D_RTS(ch));
-		}
-		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {
-			hflow2 |= (D_DTR(ch));
-		}
-
-		dgap_cmdw_ext(ch, 0xff03, hflow2, 0);
-	}
-
-	/*
-	 * Set modem control lines.
-	 */
-
-	mval ^= ch->ch_mforce & (mval ^ ch->ch_mval);
-
-	DPR_PARAM(("dgap_param: mval: %x ch_mforce: %x ch_mval: %x ch_mostat: %x\n",
-		mval, ch->ch_mforce, ch->ch_mval, ch->ch_mostat));
-
-	if (ch->ch_mostat ^ mval) {
-		ch->ch_mostat = mval;
-
-		/* Okay to have channel and board locks held calling this */
-		DPR_PARAM(("dgap_param: Sending SMODEM mval: %x\n", mval));
-		dgap_cmdb(ch, SMODEM, (uchar) mval, D_RTS(ch)|D_DTR(ch), 0);
-	}
-
-	/*
-	 * Read modem signals, and then call carrier function.
-	 */
-	ch->ch_mistat = readb(&(bs->m_stat));
-	dgap_carrier(ch);
-
-	/*
-	 * Set the start and stop characters.
-	 */
-	if (ch->ch_startc != ch->ch_fepstartc || ch->ch_stopc != ch->ch_fepstopc) {
-		ch->ch_fepstartc = ch->ch_startc;
-		ch->ch_fepstopc =  ch->ch_stopc;
-
-		/* Okay to have channel and board locks held calling this */
-		dgap_cmdb(ch, SFLOWC, ch->ch_fepstartc, ch->ch_fepstopc, 0);
-	}
-
-	/*
-	 * Set the Auxiliary start and stop characters.
-	 */
-	if (ch->ch_astartc != ch->ch_fepastartc || ch->ch_astopc != ch->ch_fepastopc) {
-		ch->ch_fepastartc = ch->ch_astartc;
-		ch->ch_fepastopc = ch->ch_astopc;
-
-		/* Okay to have channel and board locks held calling this */
-		dgap_cmdb(ch, SAFLOWC, ch->ch_fepastartc, ch->ch_fepastopc, 0);
-	}
-
-	DPR_PARAM(("param finish\n"));
-
-	return 0;
-}
-
-
-/*
- * dgap_parity_scan()
- *
- * Convert the FEP5 way of reporting parity errors and breaks into
- * the Linux line discipline way.
- */
-void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf, unsigned char *fbuf, int *len)
-{
-	int l = *len;
-	int count = 0;
-	unsigned char *in, *cout, *fout;
-	unsigned char c;
-
-	in = cbuf;
-	cout = cbuf;
-	fout = fbuf;
-
-	DPR_PSCAN(("dgap_parity_scan start\n"));
-
-	if (!ch || ch->magic != DGAP_CHANNEL_MAGIC)
-		return;
-
-	while (l--) {
-		c = *in++;
-		switch (ch->pscan_state) {
-		default:
-			/* reset to sanity and fall through */
-			ch->pscan_state = 0;
-
-		case 0:
-			/* No FF seen yet */
-			if (c == (unsigned char) '\377') {
-				/* delete this character from stream */
-				ch->pscan_state = 1;
-			} else {
-				*cout++ = c;
-				*fout++ = TTY_NORMAL;
-				count += 1;
-			}
-			break;
-
-		case 1:
-			/* first FF seen */
-			if (c == (unsigned char) '\377') {
-				/* doubled ff, transform to single ff */
-				*cout++ = c;
-				*fout++ = TTY_NORMAL;
-				count += 1;
-				ch->pscan_state = 0;
-			} else {
-				/* save value examination in next state */
-				ch->pscan_savechar = c;
-				ch->pscan_state = 2;
-			}
-			break;
-
-		case 2:
-			/* third character of ff sequence */
-
-			*cout++ = c;
-
-			if (ch->pscan_savechar == 0x0) {
-
-				if (c == 0x0) {
-					DPR_PSCAN(("dgap_parity_scan in 3rd char of ff seq. c: %x setting break.\n", c));
-					ch->ch_err_break++;
-					*fout++ = TTY_BREAK;
-				}
-				else {
-					DPR_PSCAN(("dgap_parity_scan in 3rd char of ff seq. c: %x setting parity.\n", c));
-					ch->ch_err_parity++;
-					*fout++ = TTY_PARITY;
-				}
-			}
-			else {
-				DPR_PSCAN(("%s:%d Logic Error.\n", __FILE__, __LINE__));
-			}
-
-			count += 1;
-			ch->pscan_state = 0;
-		}
-	}
-	*len = count;
-	DPR_PSCAN(("dgap_parity_scan finish\n"));
-}
-
-
-
-
-/*=======================================================================
- *
- *      dgap_event - FEP to host event processing routine.
- *
- *              bd     - Board of current event.
- *
- *=======================================================================*/
-static int dgap_event(struct board_t *bd)
-{
-	struct channel_t *ch;
-	ulong		lock_flags;
-	ulong		lock_flags2;
-	struct bs_t	*bs;
-	uchar		*event;
-	uchar		*vaddr = NULL;
-	struct ev_t	*eaddr = NULL;
-	uint		head;
-	uint		tail;
-	int		port;
-	int		reason;
-	int		modem;
-	int		b1;
-
-	if (!bd || bd->magic != DGAP_BOARD_MAGIC)
-		return -ENXIO;
-
-	DGAP_LOCK(bd->bd_lock, lock_flags);
-
-	vaddr = bd->re_map_membase;
-
-	if (!vaddr) {
-		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return -ENXIO;
-	}
-
-	eaddr = (struct ev_t *) (vaddr + EVBUF);
-
-	/* Get our head and tail */
-	head = readw(&(eaddr->ev_head));
-	tail = readw(&(eaddr->ev_tail));
-
-	/*
-	 * Forget it if pointers out of range.
-	 */
-
-	if (head >= EVMAX - EVSTART || tail >= EVMAX - EVSTART ||
-	    (head | tail) & 03) {
-		DPR_EVENT(("should be calling xxfail %d\n", __LINE__));
-		/* Let go of board lock */
-		DGAP_UNLOCK(bd->bd_lock, lock_flags);
-		return -ENXIO;
-	}
-
-	/*
-	 * Loop to process all the events in the buffer.
-	 */
-	while (tail != head) {
-
-		/*
-		 * Get interrupt information.
-		 */
-
-		event = bd->re_map_membase + tail + EVSTART;
-
-		port   = event[0];
-		reason = event[1];
-		modem  = event[2];
-		b1     = event[3];
-
-		DPR_EVENT(("event: jiffies: %ld port: %d reason: %x modem: %x\n",
-			jiffies, port, reason, modem));
-
-		/*
-		 * Make sure the interrupt is valid.
-		 */
-		if (port >= bd->nasync)
-			goto next;
-
-		if (!(reason & (IFMODEM | IFBREAK | IFTLW | IFTEM | IFDATA))) {
-			goto next;
-		}
-
-		ch = bd->channels[port];
-
-		if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) {
-			goto next;
-		}
-
-		/*
-		 * If we have made it here, the event was valid.
-		 * Lock down the channel.
-		 */
-		DGAP_LOCK(ch->ch_lock, lock_flags2);
-
-		bs = ch->ch_bs;
-
-		if (!bs) {
-			DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-			goto next;
-		}
-
-		/*
-		 * Process received data.
-		 */
-		if (reason & IFDATA) {
-
-			/*
-			 * ALL LOCKS *MUST* BE DROPPED BEFORE CALLING INPUT!
-			 * input could send some data to ld, which in turn
-			 * could do a callback to one of our other functions.
-			 */
-			DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-			DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
-			dgap_input(ch);
-
-			DGAP_LOCK(bd->bd_lock, lock_flags);
-			DGAP_LOCK(ch->ch_lock, lock_flags2);
-
-			if (ch->ch_flags & CH_RACTIVE)
-				ch->ch_flags |= CH_RENABLE;
-			else
-				writeb(1, &(bs->idata));
-
-			if (ch->ch_flags & CH_RWAIT) {
-				ch->ch_flags &= ~CH_RWAIT;
-
-				wake_up_interruptible(&ch->ch_tun.un_flags_wait);
-			}
-		}
-
-		/*
-		 * Process Modem change signals.
-		 */
-		if (reason & IFMODEM) {
-			ch->ch_mistat = modem;
-			dgap_carrier(ch);
-		}
-
-		/*
-		 * Process break.
-		 */
-		if (reason & IFBREAK) {
-
-			DPR_EVENT(("got IFBREAK\n"));
-
-			if (ch->ch_tun.un_tty) {
-				/* A break has been indicated */
-				ch->ch_err_break++;
-				tty_buffer_request_room(ch->ch_tun.un_tty->port, 1);
-				tty_insert_flip_char(ch->ch_tun.un_tty->port, 0, TTY_BREAK);
-				tty_flip_buffer_push(ch->ch_tun.un_tty->port);
-			}
-		}
-
-		/*
-		 * Process Transmit low.
-		 */
-		if (reason & IFTLW) {
-
-			DPR_EVENT(("event: got low event\n"));
-
-			if (ch->ch_tun.un_flags & UN_LOW) {
-				ch->ch_tun.un_flags &= ~UN_LOW;
-
-				if (ch->ch_tun.un_flags & UN_ISOPEN) {
-					if ((ch->ch_tun.un_tty->flags &
-					   (1 << TTY_DO_WRITE_WAKEUP)) &&
-						ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
-					{
-						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-						DGAP_UNLOCK(bd->bd_lock, lock_flags);
-						(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
-						DGAP_LOCK(bd->bd_lock, lock_flags);
-						DGAP_LOCK(ch->ch_lock, lock_flags2);
-					}
-					wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
-					wake_up_interruptible(&ch->ch_tun.un_flags_wait);
-
-					DPR_EVENT(("event: Got low event. jiffies: %lu\n", jiffies));
-				}
-			}
-
-			if (ch->ch_pun.un_flags & UN_LOW) {
-				ch->ch_pun.un_flags &= ~UN_LOW;
-				if (ch->ch_pun.un_flags & UN_ISOPEN) {
-					if ((ch->ch_pun.un_tty->flags &
-					   (1 << TTY_DO_WRITE_WAKEUP)) &&
-						ch->ch_pun.un_tty->ldisc->ops->write_wakeup)
-					{
-						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-						DGAP_UNLOCK(bd->bd_lock, lock_flags);
-						(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
-						DGAP_LOCK(bd->bd_lock, lock_flags);
-						DGAP_LOCK(ch->ch_lock, lock_flags2);
-					}
-					wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
-					wake_up_interruptible(&ch->ch_pun.un_flags_wait);
-				}
-			}
-
-			if (ch->ch_flags & CH_WLOW) {
-				ch->ch_flags &= ~CH_WLOW;
-				wake_up_interruptible(&ch->ch_flags_wait);
-			}
-		}
-
-		/*
-		 * Process Transmit empty.
-		 */
-		if (reason & IFTEM) {
-			DPR_EVENT(("event: got empty event\n"));
-
-			if (ch->ch_tun.un_flags & UN_EMPTY) {
-				ch->ch_tun.un_flags &= ~UN_EMPTY;
-				if (ch->ch_tun.un_flags & UN_ISOPEN) {
-					if ((ch->ch_tun.un_tty->flags &
-					   (1 << TTY_DO_WRITE_WAKEUP)) &&
-						ch->ch_tun.un_tty->ldisc->ops->write_wakeup)
-					{
-						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-						DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
-						(ch->ch_tun.un_tty->ldisc->ops->write_wakeup)(ch->ch_tun.un_tty);
-						DGAP_LOCK(bd->bd_lock, lock_flags);
-						DGAP_LOCK(ch->ch_lock, lock_flags2);
-					}
-					wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
-					wake_up_interruptible(&ch->ch_tun.un_flags_wait);
-				}
-			}
-
-			if (ch->ch_pun.un_flags & UN_EMPTY) {
-				ch->ch_pun.un_flags &= ~UN_EMPTY;
-				if (ch->ch_pun.un_flags & UN_ISOPEN) {
-					if ((ch->ch_pun.un_tty->flags &
-					   (1 << TTY_DO_WRITE_WAKEUP)) &&
-						ch->ch_pun.un_tty->ldisc->ops->write_wakeup)
-					{
-						DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-						DGAP_UNLOCK(bd->bd_lock, lock_flags);
-						(ch->ch_pun.un_tty->ldisc->ops->write_wakeup)(ch->ch_pun.un_tty);
-						DGAP_LOCK(bd->bd_lock, lock_flags);
-						DGAP_LOCK(ch->ch_lock, lock_flags2);
-					}
-					wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
-					wake_up_interruptible(&ch->ch_pun.un_flags_wait);
-				}
-			}
-
-
-			if (ch->ch_flags & CH_WEMPTY) {
-				ch->ch_flags &= ~CH_WEMPTY;
-				wake_up_interruptible(&ch->ch_flags_wait);
-			}
-		}
-
-		DGAP_UNLOCK(ch->ch_lock, lock_flags2);
-
-next:
-		tail = (tail + 4) & (EVMAX - EVSTART - 4);
-	}
-
-	writew(tail, &(eaddr->ev_tail));
-	DGAP_UNLOCK(bd->bd_lock, lock_flags);
-
-	return 0;
-}
-- 
1.8.1.4


_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel