[PATCH 2/4] Staging: comedi: addi-data: cleanup comments in hwdrv_apci035.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch for hwdrv_apci035.c aligns comment blocks and makes indentation
of comments consistent.  Removed all "spaces before tabs" in comment
indentation as well.

Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
---
 .../comedi/drivers/addi-data/hwdrv_apci035.c       | 140 ++++++++++-----------
 1 file changed, 70 insertions(+), 70 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
index 584a1d5..90d5801 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci035.c
@@ -188,17 +188,17 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/************************/
-/* Set the reload value */
-/************************/
+	/************************/
+	/* Set the reload value */
+	/************************/
 	outl(data[3], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 4);
-/*********************/
-/* Set the time unit */
-/*********************/
+	/*********************/
+	/* Set the time unit */
+	/*********************/
 	outl(data[2], devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 8);
 	if (data[0] == ADDIDATA_TIMER) {
 
-		 /******************************/
+		/******************************/
 		/* Set the mode :             */
 		/* - Disable the hardware     */
 		/* - Disable the counter mode */
@@ -206,7 +206,7 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
 		/* - Disable the reset        */
 		/* - Enable the timer mode    */
 		/* - Set the timer mode       */
-		 /******************************/
+		/******************************/
 
 		ui_Command =
 			(ui_Command & 0xFFF719E2UL) | ui_Mode << 13UL | 0x10UL;
@@ -215,14 +215,14 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
 	else {
 		if (data[0] == ADDIDATA_WATCHDOG) {
 
-		 /******************************/
+			/******************************/
 			/* Set the mode :             */
 			/* - Disable the hardware     */
 			/* - Disable the counter mode */
 			/* - Disable the warning      */
 			/* - Disable the reset        */
 			/* - Disable the timer mode   */
-		 /******************************/
+			/******************************/
 
 			ui_Command = ui_Command & 0xFFF819E2UL;
 
@@ -234,73 +234,73 @@ static int i_APCI035_ConfigTimerWatchdog(struct comedi_device *dev,
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/********************************/
-/* Disable the hardware trigger */
-/********************************/
+	/********************************/
+	/* Disable the hardware trigger */
+	/********************************/
 	ui_Command = ui_Command & 0xFFFFF89FUL;
 	if (data[4] == ADDIDATA_ENABLE) {
-    /**********************************/
+		/**********************************/
 		/* Set the hardware trigger level */
-    /**********************************/
+		/**********************************/
 		ui_Command = ui_Command | (data[5] << 5);
 	}
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*****************************/
-/* Disable the hardware gate */
-/*****************************/
+	/*****************************/
+	/* Disable the hardware gate */
+	/*****************************/
 	ui_Command = ui_Command & 0xFFFFF87FUL;
 	if (data[6] == ADDIDATA_ENABLE) {
-/*******************************/
-/* Set the hardware gate level */
-/*******************************/
+		/*******************************/
+		/* Set the hardware gate level */
+		/*******************************/
 		ui_Command = ui_Command | (data[7] << 7);
 	}
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*******************************/
-/* Disable the hardware output */
-/*******************************/
+	/*******************************/
+	/* Disable the hardware output */
+	/*******************************/
 	ui_Command = ui_Command & 0xFFFFF9FBUL;
-/*********************************/
-/* Set the hardware output level */
-/*********************************/
+	/*********************************/
+	/* Set the hardware output level */
+	/*********************************/
 	ui_Command = ui_Command | (data[8] << 2);
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	if (data[9] == ADDIDATA_ENABLE) {
-   /************************/
+		/************************/
 		/* Set the reload value */
-   /************************/
+		/************************/
 		outl(data[11],
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 24);
-   /**********************/
+		/**********************/
 		/* Set the time unite */
-   /**********************/
+		/**********************/
 		outl(data[10],
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 28);
 	}
 
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /*******************************/
+	/*******************************/
 	/* Disable the hardware output */
- /*******************************/
+	/*******************************/
 	ui_Command = ui_Command & 0xFFFFF9F7UL;
-   /*********************************/
+	/*********************************/
 	/* Set the hardware output level */
-   /*********************************/
+	/*********************************/
 	ui_Command = ui_Command | (data[12] << 3);
 	outl(ui_Command, devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
- /*************************************/
- /**  Enable the watchdog interrupt  **/
- /*************************************/
+	/*************************************/
+	/**  Enable the watchdog interrupt  **/
+	/*************************************/
 	ui_Command = 0;
 	ui_Command = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-/*******************************/
-/* Set the interrupt selection */
-/*******************************/
+	/*******************************/
+	/* Set the interrupt selection */
+	/*******************************/
 	ui_Status = inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 16);
 
 	ui_Command = (ui_Command & 0xFFFFF9FDUL) | (data[13] << 1);
@@ -348,9 +348,9 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
 	if (data[0] == 1) {
 		ui_Command =
 			inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-	 /**********************/
+		/**********************/
 		/* Start the hardware */
-	 /**********************/
+		/**********************/
 		ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x1UL;
 		outl(ui_Command,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -358,9 +358,9 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
 	if (data[0] == 2) {
 		ui_Command =
 			inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
-	 /***************************/
+		/***************************/
 		/* Set the trigger command */
-	 /***************************/
+		/***************************/
 		ui_Command = (ui_Command & 0xFFFFF9FFUL) | 0x200UL;
 		outl(ui_Command,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
@@ -369,10 +369,10 @@ static int i_APCI035_StartStopWriteTimerWatchdog(struct comedi_device *dev,
 	if (data[0] == 0) {
 		/* Stop The Watchdog */
 		ui_Command = 0;
-/*
-* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
-* ui_Command = ui_Command & 0xFFFFF9FEUL;
-*/
+		/*
+		* ui_Command = inl(devpriv->iobase+((i_WatchdogNbr-1)*32)+12);
+		* ui_Command = ui_Command & 0xFFFFF9FEUL;
+		*/
 		outl(ui_Command,
 			devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 12);
 	}			/*   if (data[1]==0) */
@@ -525,9 +525,9 @@ static int i_APCI035_ConfigAnalogInput(struct comedi_device *dev,
 	devpriv->tsk_Current = current;
 	outl(0x200 | 0, devpriv->iobase + 128 + 0x4);
 	outl(0, devpriv->iobase + 128 + 0);
-/********************************/
-/* Initialise the warning value */
-/********************************/
+	/********************************/
+	/* Initialise the warning value */
+	/********************************/
 	outl(0x300 | 0, devpriv->iobase + 128 + 0x4);
 	outl((data[0] << 8), devpriv->iobase + 128 + 0);
 	outl(0x200000UL, devpriv->iobase + 128 + 12);
@@ -564,18 +564,18 @@ static int i_APCI035_ReadAnalogInput(struct comedi_device *dev,
 	struct addi_private *devpriv = dev->private;
 	unsigned int ui_CommandRegister = 0;
 
-/******************/
-/*  Set the start */
-/******************/
+	/******************/
+	/*  Set the start */
+	/******************/
 	ui_CommandRegister = 0x80000;
- /******************************/
+	/******************************/
 	/* Write the command register */
- /******************************/
+	/******************************/
 	outl(ui_CommandRegister, devpriv->iobase + 128 + 8);
 
-/***************************************/
-/* Read the digital value of the input */
-/***************************************/
+	/***************************************/
+	/* Read the digital value of the input */
+	/***************************************/
 	data[0] = inl(devpriv->iobase + 128 + 28);
 	return insn->n;
 }
@@ -640,32 +640,32 @@ static void v_APCI035_Interrupt(int irq, void *d)
 		i_WatchdogNbr = i_Flag;
 		i_Flag = i_Flag + 1;
 	}
-  /**************************************/
+	/**************************************/
 	/* Read the interrupt status register of temperature Warning */
-  /**************************************/
+	/**************************************/
 	ui_StatusRegister1 = inl(devpriv->iobase + 128 + 16);
-  /**************************************/
+	/**************************************/
 	/* Read the interrupt status register for Watchdog/timer */
-   /**************************************/
+	/**************************************/
 
 	ui_StatusRegister2 =
 		inl(devpriv->iobase + ((i_WatchdogNbr - 1) * 32) + 20);
 
 	/* Test if warning relay interrupt */
 	if ((((ui_StatusRegister1) & 0x8) == 0x8)) {
-	/**********************************/
+		/**********************************/
 		/* Disable the temperature warning */
-	/**********************************/
+		/**********************************/
 		ui_ReadCommand = inl(devpriv->iobase + 128 + 12);
 		ui_ReadCommand = ui_ReadCommand & 0xFFDF0000UL;
 		outl(ui_ReadCommand, devpriv->iobase + 128 + 12);
-      /***************************/
+		/***************************/
 		/* Read the channel number */
-      /***************************/
+		/***************************/
 		ui_ChannelNumber = inl(devpriv->iobase + 128 + 60);
-	/**************************************/
+		/**************************************/
 		/* Read the digital temperature value */
-	/**************************************/
+		/**************************************/
 		ui_DigitalTemperature = inl(devpriv->iobase + 128 + 60);
 		send_sig(SIGIO, devpriv->tsk_Current, 0);	/*  send signal to the sample */
 	}			/* if (((ui_StatusRegister1 & 0x8) == 0x8)) */
-- 
1.8.5.3

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux