Use comedi_timeout() to wait for the analog input end-of-conversion. Change the errno returned when the conversion overflows from -ETIME to -EOVERFLOW. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ni_atmio16d.c | 52 ++++++++++++++++------------ 1 file changed, 29 insertions(+), 23 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c index 4f26aa9..4262385 100644 --- a/drivers/staging/comedi/drivers/ni_atmio16d.c +++ b/drivers/staging/comedi/drivers/ni_atmio16d.c @@ -96,7 +96,6 @@ Devices: [National Instruments] AT-MIO-16 (atmio16), AT-MIO-16D (atmio16d) #define CLOCK_100_HZ 0x8F25 /* Other miscellaneous defines */ #define ATMIO16D_SIZE 32 /* bus address range */ -#define ATMIO16D_TIMEOUT 10 struct atmio16_board_t { @@ -448,16 +447,32 @@ static int atmio16d_ai_cancel(struct comedi_device *dev, return 0; } -/* Mode 0 is used to get a single conversion on demand */ +static int atmio16d_ai_eoc(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned long context) +{ + unsigned int status; + + status = inw(dev->iobase + STAT_REG); + if (status & STAT_AD_CONVAVAIL) + return 0; + if (status & STAT_AD_OVERFLOW) { + outw(0, dev->iobase + AD_CLEAR_REG); + return -EOVERFLOW; + } + return -EBUSY; +} + static int atmio16d_ai_insn_read(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { struct atmio16d_private *devpriv = dev->private; - int i, t; + int i; int chan; int gain; - int status; + int ret; chan = CR_CHAN(insn->chanspec); gain = CR_RANGE(insn->chanspec); @@ -473,26 +488,17 @@ static int atmio16d_ai_insn_read(struct comedi_device *dev, for (i = 0; i < insn->n; i++) { /* start the conversion */ outw(0, dev->iobase + START_CONVERT_REG); + /* wait for it to finish */ - for (t = 0; t < ATMIO16D_TIMEOUT; t++) { - /* check conversion status */ - status = inw(dev->iobase + STAT_REG); - if (status & STAT_AD_CONVAVAIL) { - /* read the data now */ - data[i] = inw(dev->iobase + AD_FIFO_REG); - /* change to two's complement if need be */ - if (devpriv->adc_coding == adc_2comp) - data[i] ^= 0x800; - break; - } - if (status & STAT_AD_OVERFLOW) { - outw(0, dev->iobase + AD_CLEAR_REG); - return -ETIME; - } - } - /* end waiting, now check if it timed out */ - if (t == ATMIO16D_TIMEOUT) - return -ETIME; + ret = comedi_timeout(dev, s, insn, atmio16d_ai_eoc, 0); + if (ret) + return ret; + + /* read the data now */ + data[i] = inw(dev->iobase + AD_FIFO_REG); + /* change to two's complement if need be */ + if (devpriv->adc_coding == adc_2comp) + data[i] ^= 0x800; } return i; -- 1.8.5.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel