[PATCH 39/48] staging: comedi: multiq3: use comedi_timeout()

[H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>]

Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/multiq3.c | 38 ++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 3ca755e..b74b9e9 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -81,34 +81,44 @@ struct multiq3_private {
 	unsigned int ao_readback[2];
 };
 
+static int multiq3_ai_status(struct comedi_device *dev,
+			     struct comedi_subdevice *s,
+			     struct comedi_insn *insn,
+			     unsigned long context)
+{
+	unsigned int status;
+
+	status = inw(dev->iobase + MULTIQ3_STATUS);
+	if (status & context)
+		return 0;
+	return -EBUSY;
+}
+
 static int multiq3_ai_insn_read(struct comedi_device *dev,
 				struct comedi_subdevice *s,
 				struct comedi_insn *insn, unsigned int *data)
 {
-	int i, n;
+	int n;
 	int chan;
 	unsigned int hi, lo;
+	int ret;
 
 	chan = CR_CHAN(insn->chanspec);
 	outw(MULTIQ3_CONTROL_MUST | MULTIQ3_AD_MUX_EN | (chan << 3),
 	     dev->iobase + MULTIQ3_CONTROL);
 
-	for (i = 0; i < MULTIQ3_TIMEOUT; i++) {
-		if (inw(dev->iobase + MULTIQ3_STATUS) & MULTIQ3_STATUS_EOC)
-			break;
-	}
-	if (i == MULTIQ3_TIMEOUT)
-		return -ETIMEDOUT;
+	ret = comedi_timeout(dev, s, insn, multiq3_ai_status,
+			     MULTIQ3_STATUS_EOC);
+	if (ret)
+		return ret;
 
 	for (n = 0; n < insn->n; n++) {
 		outw(0, dev->iobase + MULTIQ3_AD_CS);
-		for (i = 0; i < MULTIQ3_TIMEOUT; i++) {
-			if (inw(dev->iobase +
-				MULTIQ3_STATUS) & MULTIQ3_STATUS_EOC_I)
-				break;
-		}
-		if (i == MULTIQ3_TIMEOUT)
-			return -ETIMEDOUT;
+
+		ret = comedi_timeout(dev, s, insn, multiq3_ai_status,
+				     MULTIQ3_STATUS_EOC_I);
+		if (ret)
+			return ret;
 
 		hi = inb(dev->iobase + MULTIQ3_AD_CS);
 		lo = inb(dev->iobase + MULTIQ3_AD_CS);
-- 
1.8.5.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel