[PATCH 22/48] staging: comedi: s526: use comedi_timeout()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use comedi_timeout() to wait for the analog input end-of-conversion.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/s526.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 0a93afa..85d2b7a 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -420,15 +420,28 @@ static int s526_ai_insn_config(struct comedi_device *dev,
 	return result;
 }
 
+static int s526_ai_eoc(struct comedi_device *dev,
+		       struct comedi_subdevice *s,
+		       struct comedi_insn *insn,
+		       unsigned long context)
+{
+	unsigned int status;
+
+	status = inw(dev->iobase + REG_ISR);
+	if (status & ISR_ADC_DONE)
+		return 0;
+	return -EBUSY;
+}
+
 static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 			 struct comedi_insn *insn, unsigned int *data)
 {
 	struct s526_private *devpriv = dev->private;
 	unsigned int chan = CR_CHAN(insn->chanspec);
-	int n, i;
+	int n;
 	unsigned short value;
 	unsigned int d;
-	unsigned int status;
+	int ret;
 
 	/* Set configured delay, enable channel for this channel only,
 	 * select "ADC read" channel, set "ADC start" bit. */
@@ -440,17 +453,12 @@ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		/* trigger conversion */
 		outw(value, dev->iobase + REG_ADC);
 
-#define TIMEOUT 100
 		/* wait for conversion to end */
-		for (i = 0; i < TIMEOUT; i++) {
-			status = inw(dev->iobase + REG_ISR);
-			if (status & ISR_ADC_DONE) {
-				outw(ISR_ADC_DONE, dev->iobase + REG_ISR);
-				break;
-			}
-		}
-		if (i == TIMEOUT)
-			return -ETIMEDOUT;
+		ret = comedi_timeout(dev, s, insn, s526_ai_eoc, 0);
+		if (ret)
+			return ret;
+
+		outw(ISR_ADC_DONE, dev->iobase + REG_ISR);
 
 		/* read data */
 		d = inw(dev->iobase + REG_ADD);
-- 
1.8.5.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux