Re: rtl8821ae.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Andrea,

After applying the latest patch, I get the following warning and errors when building the USB driver rtl8187:

  CC      drivers/video/fbmon.o
drivers/net/wireless/rtl818x/rtl8187/dev.c: In function ‘rtl8187_set_anaparam’:
drivers/net/wireless/rtl818x/rtl8187/dev.c:595:3: warning: passing argument 2 of ‘rtl818x_iowrite8’ from incompatible pointer type [enabled by default]
   rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
   ^
In file included from drivers/net/wireless/rtl818x/rtl8187/dev.c:31:0:
drivers/net/wireless/rtl818x/rtl8187/rtl8187.h:237:20: note: expected ‘u8 *’ but argument is of type ‘__le16 *’
 static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
                    ^
drivers/net/wireless/rtl818x/rtl8187/dev.c: In function ‘rtl8187b_init_hw’:
drivers/net/wireless/rtl818x/rtl8187/dev.c:788:9: error: ‘RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT’ undeclared (first use in this function)
  reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
         ^
drivers/net/wireless/rtl818x/rtl8187/dev.c:788:9: note: each undeclared identifier is reported only once for each function it appears in drivers/net/wireless/rtl818x/rtl8187/dev.c: In function ‘rtl8187_start’: drivers/net/wireless/rtl818x/rtl8187/dev.c:946:11: error: ‘RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT’ undeclared (first use in this function) reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
           ^
drivers/net/wireless/rtl818x/rtl8187/dev.c:947:11: error: ‘RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT’ undeclared (first use in this function)
   reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
           ^
drivers/net/wireless/rtl818x/rtl8187/dev.c:952:7: error: ‘RTL818X_TX_CONF_HW_SEQNUM’ undeclared (first use in this function)
       RTL818X_TX_CONF_HW_SEQNUM |
       ^
drivers/net/wireless/rtl818x/rtl8187/dev.c:989:10: error: ‘RTL818X_CW_CONF_PERPACKET_CW_SHIFT’ undeclared (first use in this function)
  reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
          ^
drivers/net/wireless/rtl818x/rtl8187/dev.c:990:9: error: ‘RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT’ undeclared (first use in this function)
  reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;

The warning is fixed by

Index: wireless-testing/drivers/net/wireless/rtl818x/rtl8187/dev.c
===================================================================
--- wireless-testing.orig/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ wireless-testing/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -593,7 +593,7 @@ static void rtl8187_set_anaparam(struct
        rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
        rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
        if (priv->is_rtl8187b)
-               rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
+               rtl818x_iowrite16(priv, &priv->map->ANAPARAM3, anaparam3);
        reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
        rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
        rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,

For testing purposes, I have turned on the build for rtl8187.

Larry

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel





[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux