This patch for ni_mio_common.c changes out a while loop for a timeout,
which is preferred.
Signed-off-by: Chase Southwood <chase.southwood@xxxxxxxxx>
---
OK, here's another go at it. Hopefully everything looks more correct
this time. Greg, I've followed the pattern you gave me, and I really
appreciate all of the tips! As always, just let me know if there are
still things that need adjusting (especially length of timeout, udelay,
etc.).
Thanks,
Chase Southwood
2: Changed from simple clean-up to swapping a timeout in for a while loop.
3: Removed extra counter variable, and added error checking.
4: No longer using counter variable, using jiffies instead.
drivers/staging/comedi/drivers/ni_mio_common.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
index 457b884..882b249 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -687,12 +687,21 @@ static void ni_clear_ai_fifo(struct comedi_device *dev)
{
const struct ni_board_struct *board = comedi_board(dev);
struct ni_private *devpriv = dev->private;
+ unsigned long timeout;
if (board->reg_type == ni_reg_6143) {
/* Flush the 6143 data FIFO */
ni_writel(0x10, AIFIFO_Control_6143); /* Flush fifo */
ni_writel(0x00, AIFIFO_Control_6143); /* Flush fifo */
- while (ni_readl(AIFIFO_Status_6143) & 0x10) ; /* Wait for complete */
+ /* Wait for complete */
+ timeout = jiffies + msec_to_jiffies(100);
+ while (ni_readl(AIFIFO_Status_6143) & 0x10) {
+ if (time_after(jiffies, timeout)) {
+ comedi_error(dev, "FIFO flush timeout.");
+ break;
+ }
+ udelay(1);
+ }
} else {
devpriv->stc_writew(dev, 1, ADC_FIFO_Clear);
if (board->reg_type == ni_reg_625x) {
--
1.8.4.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
