Re: [PATCH v2 1/3] staging: comedi: report success/failure of autoconfig

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2014-01-07 21:42, Bernd Porr wrote:
Added success message to the driver autoconfig and error
message in case it fails. A success message is required
so that the user can find out which comedi driver has been
associated with which udev device. This also makes troubleshooting
much easier when more than one card is in the computer or
there is a mix of USB and PCI devices.
As Ian suggested we should report both the driver and the board
which might have different names, especially if one driver covers a
range of different boards.

Signed-off-by: Bernd Porr <mail@xxxxxxxxxxxxxxx>
---
  drivers/staging/comedi/drivers.c | 20 ++++++++++++++++++--
  1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index 9d71b4d..950f544 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -603,8 +603,12 @@ int comedi_auto_config(struct device *hardware_device,
  	}

  	dev = comedi_alloc_board_minor(hardware_device);
-	if (IS_ERR(dev))
+	if (IS_ERR(dev)) {
+		dev_warn(hardware_device,
+			 "driver '%s' could not create device.\n",
+			 driver->driver_name);
  		return PTR_ERR(dev);
+	}
  	/* Note: comedi_alloc_board_minor() locked dev->mutex. */

  	dev->driver = driver;
@@ -616,8 +620,20 @@ int comedi_auto_config(struct device *hardware_device,
  		comedi_device_detach(dev);
  	mutex_unlock(&dev->mutex);

-	if (ret < 0)
+	if (ret < 0) {
+		dev_warn(hardware_device,
+			 "driver '%s' failed to auto-configure device.\n",
+			 driver->driver_name);
  		comedi_release_hardware_device(hardware_device);
+	} else {
+		/*
+		 * class_dev should be set properly here
+		 *  after a successful auto config
+		 */
+		dev_info(dev->class_dev,
+			 "driver '%s' has successfully auto-configured '%s'.\n",
+			 driver->driver_name, dev->board_name);
+	}
  	return ret;
  }
  EXPORT_SYMBOL_GPL(comedi_auto_config);


Looks fine to me.

Reviewed-by: Ian Abbott <abbotti@xxxxxxxxx>

--
-=( Ian Abbott @ MEV Ltd.    E-mail: <abbotti@xxxxxxxxx>        )=-
-=( Tel: +44 (0)161 477 1898   FAX: +44 (0)161 718 3587         )=-
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux