create mode 100644 drivers/staging/comedi/drivers/mf6x4.c
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index bfa27e7..89e25b4 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -884,6 +884,12 @@ config COMEDI_GSC_HPDI
To compile this driver as a module, choose M here: the module will be
called gsc_hpdi.
+config COMEDI_MF6X4
+ tristate "Humusoft MF634 and MF624 DAQ Card support"
+ ---help---
+ This driver supports both Humusoft MF634 and MF624 Data acquisition
+ cards. The legacy Humusoft MF614 card is not supported.
+
config COMEDI_ICP_MULTI
tristate "Inova ICP_MULTI support"
---help---
diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile
index 94cbd26..9e979a9 100644
--- a/drivers/staging/comedi/drivers/Makefile
+++ b/drivers/staging/comedi/drivers/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_COMEDI_NI_PCIMIO) += ni_pcimio.o
obj-$(CONFIG_COMEDI_RTD520) += rtd520.o
obj-$(CONFIG_COMEDI_S626) += s626.o
obj-$(CONFIG_COMEDI_SSV_DNP) += ssv_dnp.o
+obj-$(CONFIG_COMEDI_MF6X4) += mf6x4.o
# Comedi PCMCIA drivers
obj-$(CONFIG_COMEDI_CB_DAS16_CS) += cb_das16_cs.o
diff --git a/drivers/staging/comedi/drivers/mf6x4.c b/drivers/staging/comedi/drivers/mf6x4.c
new file mode 100644
index 0000000..46c7ce5
--- /dev/null
+++ b/drivers/staging/comedi/drivers/mf6x4.c
@@ -0,0 +1,368 @@
+/*
+ * comedi/drivers/mf6x4.c
+ * Driver for Humusoft MF634 and MF624 Data acquisition cards
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2000 David A. Schleef <ds@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/*
+ * Driver: mf6x4
+ * Description: Humusoft MF634 and MF624 Data acquisition card driver
+ * Devices: Humusoft MF634, Humusoft MF624
+ * Author: Rostislav Lisovy <lisovy@xxxxxxxxx>
+ * Status: works
+ * Updated:
+ * Configuration Options: none
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include "../comedidev.h"
+
+/* PCI Vendor ID, Device ID */
+#define PCI_VENDOR_ID_HUMUSOFT 0x186c
+#define PCI_DEVICE_ID_MF624 0x0624
+#define PCI_DEVICE_ID_MF634 0x0634
+
+/* Registers present in BAR0 memory region */
+#define MF624_GPIOC_reg 0x54
+
+#define MF6X4_GPIOC_EOLC /* End Of Last Conversion */ (1 << 17)
+#define MF6X4_GPIOC_LDAC /* Load DACs */ (1 << 23)
+#define MF6X4_GPIOC_DACEN (1 << 26)
+
+/* BAR1 registers */
+#define MF6X4_DIN_reg 0x10
+#define MF6X4_DIN_mask 0xff
+#define MF6X4_DOUT_reg 0x10
+#define MF6X4_DOUT_mask 0xff
+
+#define MF6X4_ADSTART_reg 0x20
+#define MF6X4_ADDATA_reg 0x00
+#define MF6X4_ADDATA_mask 0x3fff
+#define MF6X4_ADCTRL_reg 0x00
+#define MF6X4_ADCTRL_mask 0xff
+
+#define MF6X4_DA0_reg 0x20
+#define MF6X4_DA1_reg 0x22
+#define MF6X4_DA2_reg 0x24
+#define MF6X4_DA3_reg 0x26
+#define MF6X4_DA4_reg 0x28
+#define MF6X4_DA5_reg 0x2a
+#define MF6X4_DA6_reg 0x2c
+#define MF6X4_DA7_reg 0x2e
+#define MF6X4_DA_mask 0x3fff
+#define MF6X4_DAC_CHANN_CNT 8
+
+/* BAR2 registers */
+#define MF634_GPIOC_reg 0x68
+
+/* Make a fault-tolerant mapping from DAC cahnnel id obtained as
+an int to real HW-dependent offset value */
+static unsigned int mf6x4_dac_channels[MF6X4_DAC_CHANN_CNT] = {
+ [0] = MF6X4_DA0_reg,
+ [1] = MF6X4_DA1_reg,
+ [2] = MF6X4_DA2_reg,
+ [3] = MF6X4_DA3_reg,
+ [4] = MF6X4_DA4_reg,
+ [5] = MF6X4_DA5_reg,
+ [6] = MF6X4_DA6_reg,
+ [7] = MF6X4_DA7_reg,
+};
+
+enum mf6x4_boardid {
+ BOARD_MF634,
+ BOARD_MF624,
+};
+
+struct mf6x4_board {
+ const char *name;
+ unsigned int bar_nums[3]; /* We need to keep track of the
+ order of BARs used by the cards */
+};
+
+static const struct mf6x4_board mf6x4_boards[] = {
+ [BOARD_MF634] = {
+ .name = "mf634",
+ .bar_nums = {0, 2, 3},
+ },
+ [BOARD_MF624] = {
+ .name = "mf624",
+ .bar_nums = {0, 2, 4},
+ },
+};
+
+struct mf6x4_private {
+ struct pci_dev *pci_dev;
+
+ /* Documentation for both MF634 and MF624 describes registers
+ present in BAR0, 1 and 2 regions.
+ The real (i.e. in HW) BAR numbers are different for MF624 and
+ MF634 yet we will call them 0, 1, 2 */
+ void __iomem *bar0_mem;
+ void __iomem *bar1_mem;
+ void __iomem *bar2_mem;
+
+ void __iomem *gpioc_reg; /* This configuration register has the same
+ content for the both cards however it liess in different BARs
+ on different offsets -- this helps to make the access easier */
+};
+
+static int mf6x4_dio_insn_bits(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ struct mf6x4_private *devpriv = dev->private;
+
+ switch (s->type) {
+ case COMEDI_SUBD_DI: /* DIN */
+ data[1] = ioread16(devpriv->bar1_mem + MF6X4_DIN_reg) & MF6X4_DIN_mask;
+ break;
+
+ case COMEDI_SUBD_DO: /* DOUT */
+ /* data[0] -- mask
+ data[1] -- actual value */
+ if (data[0]) {
+ s->state &= ~data[0];
+ s->state |= (data[0] & data[1]);
+
+ iowrite16(s->state & MF6X4_DOUT_mask,
+ devpriv->bar1_mem + MF6X4_DOUT_reg);
+
+ data[1] = s->state;
+ }
+ break;
+ }
+
+ return insn->n;
+}
+
+static int mf6x4_ai_insn_read(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ struct mf6x4_private *devpriv = dev->private;
+ unsigned int chan = CR_CHAN(insn->chanspec);
+ unsigned int timeout = 100;
+ unsigned int eolc;
+ unsigned int n;
+ unsigned int i;
+ int d;
+
+ /* Set the ADC channel number in the scan list */
+ iowrite16((1 << chan) & MF6X4_ADCTRL_mask,
+ devpriv->bar1_mem + MF6X4_ADCTRL_reg);
+
+ for (n = 0; n < insn->n; n++) {
+ /* Trigger ADC conversion by reading ADSTART */
+ ioread16(devpriv->bar1_mem + MF6X4_ADSTART_reg);
+
+ /* Wait until the conversion finishes or times out */
+ for (i = 0; i < timeout; i++) {
+ eolc = ioread32(devpriv->gpioc_reg) & MF6X4_GPIOC_EOLC;
+
+ if (!eolc)
+ break;
+ }
+ if (i == timeout) {
+ dev_warn(dev->class_dev, "ADC conversion timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Read the actual value */
+ d = ioread16(devpriv->bar1_mem + MF6X4_ADDATA_reg);
+ d &= MF6X4_ADDATA_mask;
+ data[n] = d;
+ }
+
+ iowrite16(0x0, devpriv->bar1_mem + MF6X4_ADCTRL_reg);
+
+ return n;
+}
+
+static int mf6x4_ao_insn_write(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn, unsigned int *data)
+{
+ struct mf6x4_private *devpriv = dev->private;
+ int chan = CR_CHAN(insn->chanspec);
+ uint32_t gpioc;
+ int i;
+
+ chan = (chan < MF6X4_DAC_CHANN_CNT) ? chan : 0;
+
+ /* Enable instantaneous update of converters outputs + Enable DACs */
+ gpioc = ioread32(devpriv->gpioc_reg);
+ iowrite32((gpioc & ~MF6X4_GPIOC_LDAC) | MF6X4_GPIOC_DACEN, devpriv->gpioc_reg);
+
+ /* Writing a list of values to an AO channel is probably not
+ very useful, but that's how the interface is defined. */
+ for (i = 0; i < insn->n; i++) {
+ iowrite16(data[i] & MF6X4_DA_mask,
+ devpriv->bar1_mem + mf6x4_dac_channels[chan]);
+ }
+
+ return i;
+}
+
+static int mf6x4_auto_attach(struct comedi_device *dev, unsigned long context)
+{
+ struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+ const struct mf6x4_board *board = NULL;
+ struct mf6x4_private *devpriv;
+ struct comedi_subdevice *s;
+ int ret;
+
+ if (context < ARRAY_SIZE(mf6x4_boards))
+ board = &mf6x4_boards[context];
+ else
+ return -ENODEV;
+
+ dev->board_ptr = board;
+ dev->board_name = board->name;
+
+ ret = comedi_pci_enable(dev); /* pci_enable_device(), pci_request_regions() */
+ if (ret)
+ return ret;
+
+ devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
+ if (!devpriv)
+ return -ENOMEM;
+
+ devpriv->bar0_mem = pci_ioremap_bar(pcidev, board->bar_nums[0]);
+ if (!devpriv->bar0_mem) {
+ dev_err(dev->class_dev, "Failed to remap Device configuration BAR\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ devpriv->bar1_mem = pci_ioremap_bar(pcidev, board->bar_nums[1]);
+ if (!devpriv->bar1_mem) {
+ dev_err(dev->class_dev, "Failed to remap ADC, DAC, DIO BAR\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ devpriv->bar2_mem = pci_ioremap_bar(pcidev, board->bar_nums[2]);
+ if (!devpriv->bar2_mem) {
+ dev_err(dev->class_dev, "Failed to remap Counter/timer BAR\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (board == &mf6x4_boards[BOARD_MF634]) {
+ devpriv->gpioc_reg = devpriv->bar2_mem + MF634_GPIOC_reg;
+ } else if (board == &mf6x4_boards[BOARD_MF624]) {
+ devpriv->gpioc_reg = devpriv->bar0_mem + MF624_GPIOC_reg;
+ } else { /* Definitely should not happen */
+ devpriv->gpioc_reg = NULL;
+ }
+
+ ret = comedi_alloc_subdevices(dev, 4);
+ if (ret)
+ goto out;
+
+ /* ADC */
+ s = &dev->subdevices[0];
+ s->type = COMEDI_SUBD_AI;
+ s->subdev_flags = SDF_READABLE | SDF_GROUND;
+ s->n_chan = 8;
+ s->range_table = &range_bipolar10;
+ s->maxdata = (1 << 14) - 1; /* 14 bits ADC */
+ s->insn_read = mf6x4_ai_insn_read;
+
+ /* DAC */
+ s = &dev->subdevices[1];
+ s->type = COMEDI_SUBD_AO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 8;
+ s->range_table = &range_bipolar10;
+ s->maxdata = (1 << 14) - 1; /* 14 bits DAC */
+ s->insn_write = mf6x4_ao_insn_write;
+
+ /* DIN */
+ s = &dev->subdevices[2];
+ s->type = COMEDI_SUBD_DI;
+ s->subdev_flags = SDF_READABLE;
+ s->n_chan = 8;
+ s->range_table = &range_digital;
+ s->maxdata = 1;
+ s->insn_bits = mf6x4_dio_insn_bits;
+
+ /* DOUT */
+ s = &dev->subdevices[3];
+ s->type = COMEDI_SUBD_DO;
+ s->subdev_flags = SDF_WRITABLE;
+ s->n_chan = 8;
+ s->range_table = &range_digital;
+ s->maxdata = 1;
+ s->insn_bits = mf6x4_dio_insn_bits;
+
+ return 0;
+
+out:
+ /* dev->private is freed automatically */
+ return ret;
+}
+
+/*
+ * _detach is called to deconfigure a device. It should deallocate resources.
+ * This function is also called when _attach() fails, so it should be careful
+ * not to release resources that were not necessarily allocated by _attach().
+ * dev->private and dev->subdevices are deallocated automatically by the core.
+ */
+static void mf6x4_detach(struct comedi_device *dev)
+{
+ struct mf6x4_private *devpriv = dev->private;
+
+ if (devpriv->bar0_mem)
+ iounmap(devpriv->bar0_mem);
+ if (devpriv->bar1_mem)
+ iounmap(devpriv->bar1_mem);
+ if (devpriv->bar2_mem)
+ iounmap(devpriv->bar2_mem);
+
+ comedi_pci_disable(dev); /* pci_release_regions(), pci_disable_device() */
+}
+
+static struct comedi_driver mf6x4_driver = {
+ .driver_name = "mf6x4",
+ .module = THIS_MODULE,
+ .auto_attach = mf6x4_auto_attach,
+ .detach = mf6x4_detach,
+};
+
+static int mf6x4_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return comedi_pci_auto_config(dev, &mf6x4_driver, id->driver_data);
+}
+
+static const struct pci_device_id mf6x4_pci_table[] = {
+ { PCI_VDEVICE(HUMUSOFT, PCI_DEVICE_ID_MF634), BOARD_MF634 },
+ { PCI_VDEVICE(HUMUSOFT, PCI_DEVICE_ID_MF624), BOARD_MF624 },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, mf6x4_pci_table);
+
+static struct pci_driver mf6x4_pci_driver = {
+ .name = "mf6x4",
+ .id_table = mf6x4_pci_table,
+ .probe = mf6x4_pci_probe,
+ .remove = comedi_pci_auto_unconfig,
+};
+
+module_comedi_pci_driver(mf6x4_driver, mf6x4_pci_driver);
+
+MODULE_AUTHOR("Rostislav Lisovy <lisovy@xxxxxxxxx>");
+MODULE_DESCRIPTION("Comedi MF634 and MF624 DAQ cards driver");
+MODULE_LICENSE("GPL");
--
1.8.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
