Added success message to the driver autoconfig and error
message in case it fails. A success message is required
so that the user can find out which comedi driver has been
associated with which udev device. This also makes troubleshooting
much easier when more than one card is in the computer or a
mix of USB and PCI devices.
As Ian suggested we should report both the driver and the board
which might have different names, esp if one driver covers a
range of different boards.
Signed-off-by: Bernd Porr <mail@xxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/comedi/drivers.c b/drivers/staging/comedi/drivers.c
index d6dc58a..59a8909 100644
--- a/drivers/staging/comedi/drivers.c
+++ b/drivers/staging/comedi/drivers.c
@@ -580,8 +580,12 @@ int comedi_auto_config(struct device *hardware_device,
}
dev = comedi_alloc_board_minor(hardware_device);
- if (IS_ERR(dev))
+ if (IS_ERR(dev)) {
+ dev_warn(hardware_device,
+ "driver '%s' could not create device.\n",
+ driver->driver_name);
return PTR_ERR(dev);
+ }
/* Note: comedi_alloc_board_minor() locked dev->mutex. */
dev->driver = driver;
@@ -593,8 +597,19 @@ int comedi_auto_config(struct device *hardware_device,
comedi_device_detach(dev);
mutex_unlock(&dev->mutex);
- if (ret < 0)
+ if (ret < 0) {
+ dev_warn(hardware_device,
+ "driver '%s' faild to auto-configure device.\n",
+ driver->driver_name);
comedi_release_hardware_device(hardware_device);
+ } else {
+ /* class_dev should be set properly here
+ after a successful auto config */
+ dev_info(dev->class_dev,
+ "driver '%s' has successfully "
+ "auto-configured '%s'.\n",
+ driver->driver_name, dev->board_name);
+ }
return ret;
}
EXPORT_SYMBOL_GPL(comedi_auto_config);
--
1.8.5.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
