Fixed coding style issues.
Signed-off-by: Gary Alan Rookard <garyrookard@xxxxxxxxx>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 337 +++++++++++++++++++-----------------------
1 file changed, 148 insertions(+), 189 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 8408640..53f7191 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -5,41 +5,39 @@
#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
#define MIPS_CLOCK_REG 0x0f000820
-//DDR INIT-133Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Setting
+/* DDR INIT-133Mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /*index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* DPLL Clock Setting */
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF1B00},
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a}, /* ROB - 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040, 0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044, 0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x110a0200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101010}, /* ROB - 0x02101010,0x02101018 */
+ {0x0F007040, 0x45751200}, /* ROB - 0x45751200,0x450f1200 */
+ {0x0F007044, 0x110a0d00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x081b0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -56,16 +54,13 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Se
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* Enable BW improvement within memory controller */
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-//80Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Setting
+/* 80Mhz-T3 */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07f1ffff},
{0x0f000860, 0x00000000},
@@ -76,8 +71,7 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Settin
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
{0x0F00a04C, 0x0000000C},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -112,38 +106,34 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Settin
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-//100Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100MHz-T3 */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = { /* DPLL Clock Setting */
{0x0F000800, 0x00007008},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13E3F},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- //0x0f000840,0x0FFF1800,
- {0x0f000840, 0x0FFF1B00},
+ /* 0x0f000840,0x0FFF1800, */
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020, 0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020000 Normal - 0x01020000 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -153,7 +143,7 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},//0x02690204 // 0x06120305
+ {0x0F007048, 0x06120305}, /* 0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001C},
{0x0F007054, 0x00000000},
@@ -169,61 +159,54 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* Enable BW improvement within memory controller */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-//Net T3B DDR Settings
-//DDR INIT-133Mhz
+/* Net T3B DDR Settings */
+/* DDR INIT-133Mhz */
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF1B00},
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000870, 0x00000002}
};
-
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
+/* 133MHz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13652},
{0x0f000840, 0x0FFF0800},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000880, 0x000003DD},
+ {0x0f000880, 0x000003DD}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0F00a044, 0x1fffffff},
+ {0x0F00a044, 0x1fffffff}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040, 0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044, 0x11130d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x130a0200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101012}, /* ROB - 0x02101010,0x02101018 */
+ {0x0F007040, 0x457D1200}, /* ROB - 0x45751200,0x450f1200 */
+ {0x0F007044, 0x11130d00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x040D0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -240,14 +223,12 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock S
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000},
+ {0x0F007094, 0x00000104}, /* Enable BW improvement within memory controller */
+ {0x0F007018, 0x01010000}, /* Enable start bit within memory controller */
};
-
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting
+/* 80MHz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13FFF},
{0x0f000840, 0x0FFF1F00},
@@ -259,8 +240,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock S
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -295,13 +275,12 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock S
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
-};
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
+};
-//100Mhz
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100Mhz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F1369B},
{0x0f000840, 0x0FFF0800},
@@ -311,18 +290,16 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020, 0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020000 Normal - 0x01020000 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -332,7 +309,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},//0x02690204 // 0x06120305
+ {0x0F007048, 0x06120305}, /* 0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001C},
{0x0F007054, 0x00000000},
@@ -348,45 +325,41 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F007094, 0x00000104}, /* Enable BW improvement within memory controller */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setting
+/* 133Mhz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = { /* DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- // Changed s ource for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed s ource for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101020},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x45711200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x110D0D00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x200a0200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101020}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45711200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x110D0D00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -406,47 +379,43 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setti
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00040000},
+ {0x0F007094, 0x00040000}, /* Enable BW improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ /* Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100MHz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04020107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0204040a}, /* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x1F080200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x6e001200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x011a0a00}, /* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -469,14 +438,12 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setti
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {// # DPLL Clock Setting
+/* 80MHz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = { /* DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -533,10 +500,10 @@ static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {// # DPLL Clock Settin
-///T3 LP-B (UMA-B)
+/* T3 LP-B (UMA-B) */
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Setting
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* DPLL Clock Setting */
{0x0f000820, 0x03F137DB},
{0x0f000810, 0x01842795},
@@ -545,8 +512,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Sett
{0x0f000840, 0x0FFF0400},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},//Now dump from her in internal memory
+ {0x0f003050, 0x00000021}, /* this is flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* Now dump from her in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -592,40 +559,38 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Sett
{0x0F007018, 0x01010000}
};
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Setting
+/* 133MHz-T3LPB */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = { /* DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},//dump from here in internal memory
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a}, /* ROB - 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101017},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x45171200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x11290D00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x190a0200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101017}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45171200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x11290D00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -645,48 +610,44 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Sett
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094, 0x00040000},
+ {0x0F007094, 0x00040000}, /* Enable BW improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ /* Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100MHz-T3LPB */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = { /* DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840, 0x0FFF0000},
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff}, //dump from here in internal memory
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
- //Memcontroller Default values
- {0x0F007000, 0x00010001},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04020107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020001 Normal - 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0204040a}, /* ROB - 0x0205050a,0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x1F080200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x6e001200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x011a0a00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -709,14 +670,12 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Sett
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018, 0x01010000}
+ {0x0F00A000, 0x00000016}, /* Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* Enable start bit within memory controller */
};
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {// # DPLL Clock Setting
+/* 80MHz-T3LPB */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = { /* DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -724,8 +683,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {// # DPLL Clock Setti
{0x0f000840, 0x0FFF1F00},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},// dump from here in internal memory
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -904,7 +863,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
break;
case DDR_133_MHZ:
- if (Adapter->bDPLLConfig == PLL_266_MHZ) { //266Mhz PLL selected.
+ if (Adapter->bDPLLConfig == PLL_266_MHZ) { /* 266Mhz PLL selected. */
memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
sizeof(asDPLL_266MHZ));
psDDRSetting = asT3B_DDRSetting133MHz;
@@ -987,8 +946,8 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
* This is to be done only for Hybrid PMU mode.
* with the current h/w there is no way to detect this.
* and since we dont have internal PMU lets do it under UMA-B chip id.
- * we will change this when we will have internal PMU.
- */
+ * we will change this when we will have internal PMU.
+ */
if (Adapter->PmuMode == HYBRID_MODE_7C) {
retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if (retval < 0) {
@@ -1189,7 +1148,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
default:
return -EINVAL;
}
- //total number of Register that has to be dumped
+ /* total number of Register that has to be dumped */
value = RegCount ;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if (retval) {
@@ -1198,7 +1157,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
return retval;
}
ul_ddr_setting_load_addr += sizeof(ULONG);
- /*signature */
+ /* signature */
value = (0x1d1e0dd0);
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if (retval) {
@@ -1217,7 +1176,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018)) {
value = (psDDRSetting->ulRegValue | (1<<8));
if (STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr,
- &value, sizeof(value))) {
+ &value, sizeof(value))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
break;
}
--
1.8.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
