This is the fifth patch of a series.
Signed-off-by: Gary Alan Rookard <garyrookard@xxxxxxxxx>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 270 +++++++++++++++++++++---------------------
1 file changed, 135 insertions(+), 135 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index cb4dd53..1a08b17 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -5,15 +5,15 @@
#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
#define MIPS_CLOCK_REG 0x0f000820
- //DDR INIT-133Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Setting
+ /* DDR INIT-133Mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F00700 */0
+static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF1B00},
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
@@ -21,7 +21,7 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Se
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -29,17 +29,17 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Se
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003};
- {0x0F007038, 0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040, 0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044, 0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x110a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101010},/* ROB - 0x02101010,0x02101018}, */
+ {0x0F007040, 0x45751200},/* ROB - 0x45751200,0x450f1200}, */
+ {0x0F007044, 0x110a0d00},/*ROB - 0x110a0d00.0x111f0d00 */
{0x0F007048, 0x081b0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -56,16 +56,16 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {// # DPLL Clock Se
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
+ /* # Enable BW improvement within memory controller */
{0x0F007094, 0x00000104},
- //# Enable 2 ports within X-bar
+ /* # Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-//80Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Setting
+/* 80Mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07f1ffff},
{0x0f000860, 0x00000000},
@@ -76,7 +76,7 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Settin
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
{0x0F00a04C, 0x0000000C},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
@@ -112,19 +112,19 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = {// # DPLL Clock Settin
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
+ /*# Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-//100Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100Mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
{0x0F000800, 0x00007008},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13E3F},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- //0x0f000840,0x0FFF1800,
+ /* Changed source for X-bar and MIPS clock to APLL */
+ /* 0x0f000840,0x0FFF1800, */
{0x0f000840, 0x0FFF1B00},
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
@@ -132,9 +132,9 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- //# Enable 2 ports within X-bar
+ /* # Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
+ /*Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -142,8 +142,8 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020, 0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020000 Normal 0x01020000 */
+ {0x0F007020, 0x04020107},/* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -153,7 +153,7 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},//0x02690204 // 0x06120305
+ {0x0F007048, 0x06120305},/* 0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001C},
{0x0F007054, 0x00000000},
@@ -169,43 +169,43 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {// # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
+ /* # Enable BW improvement within memory controller */
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-//Net T3B DDR Settings
-//DDR INIT-133Mhz
+/* Net T3B DDR Settings */
+/* DDR INIT-133Mhz */
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF1B00},
{0x0f000870, 0x00000002}
};
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13652},
{0x0f000840, 0x0FFF0800},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000880, 0x000003DD},
{0x0f000860, 0x00000000},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //# Enable 2 ports within X-bar
+ /* # Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -213,17 +213,17 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock S
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040, 0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044, 0x11130d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x130a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101012},/* ROB - 0x02101010,0x02101018}, */
+ {0x0F007040, 0x457D1200},/* ROB - 0x45751200,0x450f1200}, */
+ {0x0F007044, 0x11130d00},/* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x040D0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -240,14 +240,14 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock S
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
+ /* # Enable BW improvement within memory controller */
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000},
};
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /*index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13FFF},
{0x0f000840, 0x0FFF1F00},
@@ -259,7 +259,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock S
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
@@ -295,13 +295,13 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock S
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-//100Mhz
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting
+/* 100Mhz */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F1369B},
{0x0f000840, 0x0FFF0800},
@@ -311,9 +311,9 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //# Enable 2 ports within X-bar
+ /*# Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -321,8 +321,8 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020, 0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020000 Normal 0x01020000 */
+ {0x0F007020, 0x04020107},/* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -332,7 +332,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},//0x02690204 // 0x06120305
+ {0x0F007048, 0x06120305},/*0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001C},
{0x0F007054, 0x00000000},
@@ -348,19 +348,19 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock S
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- //# Enable BW improvement within memory controller
+ /* # Enable BW improvement within memory controller */
{0x0F007094, 0x00000104},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setting
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /*index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF0000},
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
@@ -368,7 +368,7 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setti
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -376,17 +376,17 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setti
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101020},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x45711200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x110D0D00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x200a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101020},/* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45711200},/* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x110D0D00},/* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -406,29 +406,29 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {// # DPLL Clock Setti
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- //# Enable BW improvement within memory controller
+ /*# Enable BW improvement within memory controller */
{0x0F007094, 0x00040000},
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
+ /* # Enable 2 ports within X-bar */
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setting
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF0000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -436,17 +436,17 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setti
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04020107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0204040a},/* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x1F080200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F},/* ROB - 0x02101010,//0x02101018, */
+ {0x0F007040, 0x6e001200},/* ROB - 0x45751200,//0x450f1200, */
+ {0x0F007044, 0x011a0a00},/* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -469,14 +469,14 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {// # DPLL Clock Setti
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- //# Enable 2 ports within X-bar
+ /* # Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {// # DPLL Clock Setting
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -533,10 +533,10 @@ static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {// # DPLL Clock Settin
-///T3 LP-B (UMA-B)
+/* T3 LP-B (UMA-B) */
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Setting
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* # DPLL Clock Setting */
{0x0f000820, 0x03F137DB},
{0x0f000810, 0x01842795},
@@ -545,8 +545,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Sett
{0x0f000840, 0x0FFF0400},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},//Now dump from her in internal memory
+ {0x0f003050, 0x00000021},/* this is flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff},/* Now dump from her in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -593,21 +593,21 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {// # DPLL Clock Sett
};
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Setting
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF0000},
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},//dump from here in internal memory
+ {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff},/* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -615,17 +615,17 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Sett
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x02101017},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x45171200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x11290D00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x190a0200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101017},/* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45171200},/* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x11290D00},/* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -645,30 +645,30 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {// # DPLL Clock Sett
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- //# Enable BW improvement within memory controller
+ /* # Enable BW improvement within memory controller */
{0x0F007094, 0x00040000},
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
+ /* # Enable 2 ports within X-bar */
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Setting
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /*index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
+ /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000840, 0x0FFF0000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff}, //dump from here in internal memory
+ {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
- //Memcontroller Default values
+ /* Memcontroller Default values */
{0x0F007000, 0x00010001},
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
@@ -676,17 +676,17 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Sett
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020, 0x04020107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F00701c, 0x01020000},/* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F00702c, 0x0204040a},/*ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C, 0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040, 0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044, 0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007038, 0x1F080200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F},/* ROB - 0x02101010,//0x02101018, */
+ {0x0F007040, 0x6e001200},/* ROB - 0x45751200,//0x450f1200, */
+ {0x0F007044, 0x011a0a00},/* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -709,14 +709,14 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {// # DPLL Clock Sett
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- //# Enable 2 ports within X-bar
+ /* # Enable 2 ports within X-bar */
{0x0F00A000, 0x00000016},
- //# Enable start bit within memory controller
+ /* # Enable start bit within memory controller */
{0x0F007018, 0x01010000}
};
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {// # DPLL Clock Setting
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /*index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -724,8 +724,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {// # DPLL Clock Setti
{0x0f000840, 0x0FFF1F00},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084, 0x1Cffffff},// dump from here in internal memory
+ {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff},/* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -925,7 +925,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
break;
case DDR_133_MHZ:
- if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected.
+ if(Adapter->bDPLLConfig == PLL_266_MHZ)/*266Mhz PLL selected. */
{
memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
sizeof(asDPLL_266MHZ));
@@ -1230,7 +1230,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
default:
return -EINVAL;
}
- //total number of Register that has to be dumped
+ /* total number of Register that has to be dumped */
value = RegCount ;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if(retval)
--
1.8.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
