Fixed non_standard kernel style.
Signed off by: Gary Alan Rookard <garyrookard@xxxxxxxxx>
---
drivers/staging/bcm/DDRInit.c | 2081 +++++++++++++++++++----------------------
1 file changed, 977 insertions(+), 1104 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 9f7e30f..2fc3ba9 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -1,977 +1,876 @@
-#include "headers.h"
-
+/* File: DDRInit.c */
+#include "headers.h"
#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
-#define MIPS_CLOCK_REG 0x0f000820
-
- //DDR INIT-133Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x081b0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
- };
-//80Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07f1ffff},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a000,0x00000016},
- {0x0F00a04C,0x0000000C},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01000000},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},
- {0x0F007020,0x04020107},
- {0x0F007024,0x00000007},
- {0x0F007028,0x02020201},
- {0x0F00702c,0x0204040a},
- {0x0F007030,0x04000000},
- {0x0F007034,0x00000002},
- {0x0F007038,0x1F060200},
- {0x0F00703C,0x1C22221F},
- {0x0F007040,0x8A006600},
- {0x0F007044,0x221a0800},
- {0x0F007048,0x02690204},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x000A15D6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00004000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007094,0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
- };
-//100Mhz
-#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
-static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007008},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13E3F},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- //0x0f000840,0x0FFF1800,
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020201},
- {0x0F00702c,0x0204040A},
- {0x0F007030,0x06000000},
- {0x0F007034,0x00000004},
- {0x0F007038,0x20080200},
- {0x0F00703C,0x02030320},
- {0x0F007040,0x6E7F1200},
- {0x0F007044,0x01190A00},
- {0x0F007048,0x06120305},//0x02690204 // 0x06120305
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001C},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
- };
+#define MIP_CLOCK_REG 0x0F000820
-//Net T3B DDR Settings
-//DDR INIT-133Mhz
+/* DDR INIT-133Mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHz 12 /* index for 0x0F00700 */
+static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* DPLL Clock Setting */
+ {0x0F000800, 0x00007212},
+ {0x0F000820, 0x07F13FFF},
+ {0x0F000810, 0x00000F95},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF1B00}, /* Changed Source for X-bar and MIPS Clock to APLL */
+ {0xF0000870, 0x00000002},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A04C, 0x0000000C},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020001}, /* POP 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* POP 0x05030107 Normal 0x04030107 */
+ {0x0F007024, 0x02000007},
+ {0x0F007028, 0x02020202},
+ {0x0F00702C, 0x0206060A}, /* ROB 0x025050A,0x0206060A */
+ {0x0F007030, 0x05000000},
+ {0x0F007034, 0x00000003},
+ {0x0F007038, 0x110A0200}, /* ROB 0x110A0200,0x180A0200,0x1F0A0200 */
+ {0x0F00703C, 0x02101010}, /* ROB 0x02101010,0x02101018 */
+ {0x0F007040, 0x45751200}, /* ROB 0x45751200,0x450F1200 */
+ {0x0F007044, 0x110A0D00}, /* ROB 0x110A0D00,0x111F0D00 */
+ {0x0F007048, 0x081B0306},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0000001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x0010246C},
+ {0x0F007064, 0x00000010},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00007000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000104}, /* Enable BW Improvement w/in Memory Controller */
+ {0x0F00A000, 0x00000016}, /* Enable 2 Ports w/in X-bar */
+ {0x0F007018, 0x01010000}, /* Enable Start Bit w/in Memory Controller */
+};
+/* 80mhz */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting80Mhz[] = { /* DPLL Clock Setting */
+ {0x0F000810, 0x00000F95},
+ {0x0F000820, 0x07F1FFFF},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F00A04C, 0x0000000C},
+ {0x0F007000, 0x00010001}, /* Memcontroller Defult Values */
+ {0x0F007004, 0x01000000},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00700C, 0x00000000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x02020201},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x04000000},
+ {0x0F007034, 0x00000002},
+ {0x0F007038, 0x1F060200},
+ {0x0F00703C, 0x1C22221F},
+ {0x0F007040, 0xBA006600},
+ {0x0F007044, 0x221A0800},
+ {0x0F007048, 0x02690204},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0000001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x000A15D6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00004000},
+ {0x0F007074, 0x0000000A},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000104},
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in memory controller */
+};
+/* 100MHz-T3 */
+#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = { /* DPLL Clock Setting */
+ {0x0F000800, 0x00007008},
+ {0x0F000810, 0x00000F95},
+ {0x0F000820, 0x07F13E3F},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF1B00}, /* Changed Source for X-bar and MIPS Clock to APLL */
+ {0x0F000870, 0x00000002},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A04C, 0x0000000C},
+ {0x0F00A000, 0x00000016}, /* Enable 2 Ports w/in X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x10000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020001}, /* POP 0x00020000 Normal 0x01020000 */
+ {0x0F007020, 0x04040107}, /* POP 0x05030107 Normal 0x04030107 */
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x01020201},
+ {0x0F00702C, 0x0200404A},
+ {0x0F007030, 0x06000000},
+ {0x0F007034, 0x00000004},
+ {0x0F007038, 0x20080200},
+ {0x0F00703C, 0x20300320},
+ {0x0F007040, 0x6E7F1200},
+ {0x0F007044, 0x01190A00},
+ {0x0F007048, 0x06120305},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0000001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x00082ED6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00005000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000140}, /* Enable BW Improvement w/in Memcontroller */
+ {0x0F007018, 0x10100000} /* Enable Start Bit w/in Memcontroller */
+};
+/* 266Mhz-DPLL */
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002}
- };
-
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13652},
- {0x0f000840,0x0FFF0800},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x040D0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000012},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000},
- };
-
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13FFF},
- {0x0f000840,0x0FFF1F00},
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
-
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01000000},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},
- {0x0F007020,0x04020107},
- {0x0F007024,0x00000007},
- {0x0F007028,0x02020201},
- {0x0F00702c,0x0204040a},
- {0x0F007030,0x04000000},
- {0x0F007034,0x02000002},
- {0x0F007038,0x1F060202},
- {0x0F00703C,0x1C22221F},
- {0x0F007040,0x8A006600},
- {0x0F007044,0x221a0800},
- {0x0F007048,0x02690204},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x000A15D6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00004000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007094,0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
- };
-
-//100Mhz
-#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F1369B},
- {0x0f000840,0x0FFF0800},
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020201},
- {0x0F00702c,0x0204040A},
- {0x0F007030,0x06000000},
- {0x0F007034,0x02000004},
- {0x0F007038,0x20080200},
- {0x0F00703C,0x02030320},
- {0x0F007040,0x6E7F1200},
- {0x0F007044,0x01190A00},
- {0x0F007048,0x06120305},//0x02690204 // 0x06120305
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001C},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
- };
-
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0f000820,0x03F1365B},
- {0x0f000810,0x00002F95},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF0000},
- {0x0f000860,0x00000000},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00A000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020200},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101020},//ROB - 0x02101010,//0x02101018,
- {0x0F007040,0x45711200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044,0x110D0D00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x04080306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010245F},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007088,0x01000001},
- {0x0F00708c,0x00000101},
- {0x0F007090,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00040000},
- {0x0F007098,0x00000000},
- {0x0F0070c8,0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F000800, 0x00007212},
+ {0x0F000820, 0x07F13FFF},
+ {0x0F000810, 0x00000F95},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF1B00}, /* Changed Source for X-bar and MIPS clock to APLL */
+ {0x0F000870, 0x00000002},
};
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting
- {0x0f000810,0x00002F95},
- {0x0f000820,0x03F1369B},
- {0x0f000840,0x0fff0000},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF0000},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020200},
- {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x06000000},
- {0x0F007034,0x00000004},
- {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x03000305},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007088,0x01000001},
- {0x0F00708c,0x00000101},
- {0x0F007090,0x00000000},
- {0x0F007094,0x00010000},
- {0x0F007098,0x00000000},
- {0x0F0070C8,0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+/* 133MHz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F00700 */
+static struct bcm_ddr_setting asT3B_DDRSetting133MGZ[] = { /* DPLL Clock Setting */
+ {0x0F000810, 0x00000F95},
+ {0x0F000820, 0x07F13652},
+ {0x0F000840, 0x0FFF0800},
+ {0x0F00A000, 0x00000016}, /* Enable 2 Ports w/in X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020001}, /* POP 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* POP 0x05030107 Normal 0x04030107 */
+ {0x0F007024, 0x02000007},
+ {0x0F007028, 0x02020202},
+ {0x0F00702C, 0x0206060A}, /* ROB 0x0205050A,0x0206060A */
+ {0x0F007030, 0x05000000},
+ {0x0F007034, 0x00000003},
+ {0x0F007038, 0x130A0200}, /* ROB 0x110A0200,0x180A0200,0x1F0A0200 */
+ {0x0F00703C, 0x02101012}, /* ROB 0x02101010,0x02101018 */
+ {0x0F007040, 0x457D1200}, /* ROB 0x45751200,0x450F1200 */
+ {0x0F007044, 0x11130D00}, /* ROB 0x110A0D00,0x111F0D00 */
+ {0x0F007048, 0x040D0306},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0000001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x0010246C},
+ {0x0F007064, 0x00000012},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00007000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000104}, /* Enable BW Improvement w/in Memcontroller */
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
};
-
-#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00002F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0f000840,0x0FFF1F00},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00A000,0x00000016},
- {0x0f007000,0x00010001},
- {0x0f007004,0x01000000},
- {0x0f007008,0x01000001},
- {0x0f00700c,0x00000000},
- {0x0f007010,0x01000000},
- {0x0f007014,0x01000100},
- {0x0f007018,0x01000000},
- {0x0f00701c,0x01020000},
- {0x0f007020,0x04020107},
- {0x0f007024,0x00000007},
- {0x0f007028,0x02020200},
- {0x0f00702c,0x0204040a},
- {0x0f007030,0x04000000},
- {0x0f007034,0x00000002},
- {0x0f007038,0x1d060200},
- {0x0f00703c,0x1c22221d},
- {0x0f007040,0x8A116600},
- {0x0f007044,0x222d0800},
- {0x0f007048,0x02690204},
- {0x0f00704c,0x00000000},
- {0x0f007050,0x0100001c},
- {0x0f007054,0x00000000},
- {0x0f007058,0x00000000},
- {0x0f00705c,0x00000000},
- {0x0f007060,0x000A15D6},
- {0x0f007064,0x0000000A},
- {0x0f007068,0x00000000},
- {0x0f00706c,0x00000001},
- {0x0f007070,0x00004000},
- {0x0f007074,0x00000000},
- {0x0f007078,0x00000000},
- {0x0f00707c,0x00000000},
- {0x0f007080,0x00000000},
- {0x0f007084,0x00000000},
- {0x0f007088,0x01000001},
- {0x0f00708c,0x00000101},
- {0x0f007090,0x00000000},
- {0x0f007094,0x00010000},
- {0x0f007098,0x00000000},
- {0x0F0070C8,0x00000104},
- {0x0F007018,0x01010000}
+/* 80MHz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting80MHZ[] = { /* DPLL Clock Setting */
+ {0x0F000810, 0x00000F95},
+ {0x0F000820, 0x07F13FFF},
+ {0x0F000840, 0x0FFF1F00},
+ {0x0F000880, 0x000003DD},
+ {0x0F000860, 0x00000000},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00a040, 0x1f000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01000000},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x02020201},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x04000000},
+ {0x0F007034, 0x02000002},
+ {0x0F007038, 0x1F060202},
+ {0x0F00703C, 0x1C22221F},
+ {0x0F007040, 0x8A006600},
+ {0x0F007044, 0x221A0800},
+ {0x0F007048, 0x02690204},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x000A15D6},
+ {0x0F007064, 0x00000004},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00004000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000104},
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
};
-
-
-
-
-///T3 LP-B (UMA-B)
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting
-
- {0x0f000820,0x03F137DB},
- {0x0f000810,0x01842795},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0f000840,0x0FFF0400},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0f003050,0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084,0x1Cffffff},//Now dump from her in internal memory
- {0x0F00a080,0x1C000000},
- {0x0F00A000,0x00000016},
- {0x0f007000,0x00010001},
- {0x0f007004,0x01000001},
- {0x0f007008,0x01000101},
- {0x0f00700c,0x00000000},
- {0x0f007010,0x01000100},
- {0x0f007014,0x01000100},
- {0x0f007018,0x01000000},
- {0x0f00701c,0x01020000},
- {0x0f007020,0x04030107},
- {0x0f007024,0x02000007},
- {0x0f007028,0x02020200},
- {0x0f00702c,0x0206060a},
- {0x0f007030,0x050d0d00},
- {0x0f007034,0x00000003},
- {0x0f007038,0x170a0200},
- {0x0f00703c,0x02101012},
- {0x0f007040,0x45161200},
- {0x0f007044,0x11250c00},
- {0x0f007048,0x04da0307},
- {0x0f00704c,0x00000000},
- {0x0f007050,0x0000001c},
- {0x0f007054,0x00000000},
- {0x0f007058,0x00000000},
- {0x0f00705c,0x00000000},
- {0x0f007060,0x00142bb6},
- {0x0f007064,0x20430014},
- {0x0f007068,0x00000000},
- {0x0f00706c,0x00000001},
- {0x0f007070,0x00009000},
- {0x0f007074,0x00000000},
- {0x0f007078,0x00000000},
- {0x0f00707c,0x00000000},
- {0x0f007080,0x00000000},
- {0x0f007084,0x00000000},
- {0x0f007088,0x01000001},
- {0x0f00708c,0x00000101},
- {0x0f007090,0x00000000},
- {0x0f007094,0x00040000},
- {0x0f007098,0x00000000},
- {0x0F0070C8,0x00000104},
- {0x0F007018,0x01010000}
+/* 100MHz-T3B */
+#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3B_DDRSetting100MHZ[] = { /* DPll Clock Setting */
+ {0x0F000810, 0x00000F95},
+ {0x0F000820, 0x07F1369B},
+ {0x0F000840, 0x0FFF0800},
+ {0x0F000880, 0x000003DD},
+ {0x0F000860, 0x00000000},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016}, /* Enable 2 Ports w/in X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x01020201},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x06000000},
+ {0x0F007034, 0x02000004},
+ {0x0F007038, 0x20080200},
+ {0x0F00703C, 0x02030320},
+ {0x0F007040, 0x6E7F1200},
+ {0x0F007044, 0x01190A00},
+ {0x0F007048, 0x06120305},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x00082ED2},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00005000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007094, 0x00000104}, /* Enable BW w/in Memcontroller */
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
};
-
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0f000820,0x03F1365B},
- {0x0f000810,0x00002F95},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF0000},
- {0x0f000860,0x00000000},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084,0x1Cffffff},//dump from here in internal memory
- {0x0F00a080,0x1C000000},
- {0x0F00A000,0x00000016},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020200},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101017},//ROB - 0x02101010,//0x02101018,
- {0x0F007040,0x45171200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044,0x11290D00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x04080306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010245F},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007088,0x01000001},
- {0x0F00708c,0x00000101},
- {0x0F007090,0x00000000},
- //# Enable BW improvement within memory controller
- {0x0F007094,0x00040000},
- {0x0F007098,0x00000000},
- {0x0F0070c8,0x00000104},
- //# Enable 2 ports within X-bar
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+/* 133MHz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting133MHZ[] = { /* DPLL Clock Settings */
+ {0x0F000820, 0x03F1365B},
+ {0x0F000810, 0x00002F95},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF0000}, /* Changed Source for X-bar and MIPS clock to DPLL */
+ {0x0F000860, 0x00000000},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00110001}, /* Memcontroller DEfault Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020001}, /* POP 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* POP 0x05030107 Normal 0x04030107 */
+ {0x0F007024, 0x02000007},
+ {0x0F007028, 0x02020200},
+ {0x0F00702C, 0x0206060A}, /* ROB 0x0205050A,0x0206060A */
+ {0x0F007030, 0x05000000},
+ {0x0F007034, 0x00000003},
+ {0x0F007038, 0x200A0200}, /* ROB 0x110A0200,0x180A0200,0x1F0A0200 */
+ {0x0F00703C, 0x02101020}, /* ROB 0x02101010,0x02101018 */
+ {0x0F007040, 0x45711200}, /* ROB 0x45751200,0x450F1200 */
+ {0x0F007044, 0x110D0D00}, /* ROB 0x110A0D00,0x111F0D00 */
+ {0x0F007048, 0x04080306},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x0010245F},
+ {0x0F007064, 0x00000010},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00007000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00040000}, /* Enable BW Improvement w/in Memcontroller */
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
};
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting
- {0x0f000810,0x00002F95},
- {0x0f000820,0x03F1369B},
- {0x0f000840,0x0fff0000},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- // Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF0000},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084,0x1Cffffff}, //dump from here in internal memory
- {0x0F00a080,0x1C000000},
- //Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020200},
- {0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x06000000},
- {0x0F007034,0x00000004},
- {0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
- {0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
- {0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x03000305},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0100001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007088,0x01000001},
- {0x0F00708c,0x00000101},
- {0x0F007090,0x00000000},
- {0x0F007094,0x00010000},
- {0x0F007098,0x00000000},
- {0x0F0070C8,0x00000104},
- //# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
- //# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+/* 100MHz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting100MHZ[] = { /* DPLL Clock Setting */
+ {0x0F000810, 0x00002F95},
+ {0x0F000820, 0x03F1369B},
+ {0x0F000840, 0x0FFF0000},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF0000}, /* Changed Source for X-bar and MIPS clock to APLL */
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000}, /* POP 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04020107}, /* POP 0x05030107 Normal 0x04030107 */
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x01020200},
+ {0x0F00702C, 0x0204040A}, /* ROB 0x0205050A,0x0206060A */
+ {0x0F007030, 0x06000000},
+ {0x0F007034, 0x00000004},
+ {0x0F007038, 0x1F080200}, /* ROB 0x110A0200,0x080A0200,0x1F0A0200 */
+ {0x0F00703C, 0x0203031F}, /* ROB 0x02101010,0x02101018 */
+ {0x0F007040, 0x6E001200}, /* ROB 0x45751200,0x450F1200 */
+ {0x0F007044, 0x011A0A00}, /* ROB 0x110A0D00,0x111F0D00 */
+ {0x0F007048, 0x03000305},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x00082ED6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00005000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00010000},
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F00A000, 0x00000016}, /* Enable 2 Ports w/in X-Bar */
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
};
-
-#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000
-static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00002F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0f000840,0x0FFF1F00},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
- {0x0F00a084,0x1Cffffff},// dump from here in internal memory
- {0x0F00a080,0x1C000000},
- {0x0F00A000,0x00000016},
- {0x0f007000,0x00010001},
- {0x0f007004,0x01000000},
- {0x0f007008,0x01000001},
- {0x0f00700c,0x00000000},
- {0x0f007010,0x01000000},
- {0x0f007014,0x01000100},
- {0x0f007018,0x01000000},
- {0x0f00701c,0x01020000},
- {0x0f007020,0x04020107},
- {0x0f007024,0x00000007},
- {0x0f007028,0x02020200},
- {0x0f00702c,0x0204040a},
- {0x0f007030,0x04000000},
- {0x0f007034,0x00000002},
- {0x0f007038,0x1d060200},
- {0x0f00703c,0x1c22221d},
- {0x0f007040,0x8A116600},
- {0x0f007044,0x222d0800},
- {0x0f007048,0x02690204},
- {0x0f00704c,0x00000000},
- {0x0f007050,0x0100001c},
- {0x0f007054,0x00000000},
- {0x0f007058,0x00000000},
- {0x0f00705c,0x00000000},
- {0x0f007060,0x000A15D6},
- {0x0f007064,0x0000000A},
- {0x0f007068,0x00000000},
- {0x0f00706c,0x00000001},
- {0x0f007070,0x00004000},
- {0x0f007074,0x00000000},
- {0x0f007078,0x00000000},
- {0x0f00707c,0x00000000},
- {0x0f007080,0x00000000},
- {0x0f007084,0x00000000},
- {0x0f007088,0x01000001},
- {0x0f00708c,0x00000101},
- {0x0f007090,0x00000000},
- {0x0f007094,0x00010000},
- {0x0f007098,0x00000000},
- {0x0F0070C8,0x00000104},
- {0x0F007018,0x01010000}
+/* 80MHz-T3LP */
+#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LP_DDRSetting80MHZ[] = { /* DPLL Clock Setting */
+ {0x0F000820, 0x07F13FFF},
+ {0x0F000810, 0x00002F95},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF1F00},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01000000},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x02020200},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x04000000},
+ {0x0F007034, 0x00000002},
+ {0x0F007038, 0x1D060200},
+ {0x0F00703C, 0x1C22221D},
+ {0x0F007040, 0x8A116600},
+ {0x0F007044, 0x222D0800},
+ {0x0F007048, 0x02690204},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x000A15D6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00004000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0f007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00010000},
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
+};
+/* 160MHz-T3LPB (UMA-B) */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSettings160MHZ[] = { /* DPLL Clock Setting */
+ {0x0F000820, 0x03F137DB},
+ {0x0F000810, 0x01842795},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF0400},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F003050, 0x00000021}, /* Flash/EEPROM Clock Div / setting Flash Clock to 20MHz */
+ {0x0F00A084, 0x1CFFFFFF}, /* Dumping from Internal Memory */
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01000001},
+ {0x0F007008, 0x01000101},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000101},
+ {0x0F007014, 0x01000101},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04030107},
+ {0x0F007024, 0x02000007},
+ {0x0F007028, 0x02020200},
+ {0x0F00702C, 0x0206060A},
+ {0x0F007030, 0x050D0D00},
+ {0x0F007034, 0x00000003},
+ {0x0F007038, 0x170A0200},
+ {0x0F00703C, 0x02101012},
+ {0x0F007040, 0x45161200},
+ {0x0F007044, 0x11250C00},
+ {0x0F007048, 0x04DA0307},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0000001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x00142BB6},
+ {0x0F007064, 0x20430014},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00009000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00040000},
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
+};
+/* 133MHz-T3LPB(UMA_B) */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting133MHZ[] = { /* DPLL Clock Setting */
+ {0x0F000820, 0x03F1356B},
+ {0x0F000810, 0x00002F95},
+ {0x0F000880, 0x000003DD},
+ {0x0F000840, 0x0FFF0000},
+ {0x0F000860, 0x00000000},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F003050, 0x00000021}, /* Flash/EEPROM Clock Div / Setting Flash Clock to 20MHz */
+ {0x0F00A084, 0x1CFFFFFF}, /* Dumping from Internal Memory */
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020001}, /* POP 0x00020001, Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* POP 0x05030107, Normal 0x04030107 */
+ {0x0F007024, 0x02000007},
+ {0x0F007028, 0x02020200},
+ {0x0F00702C, 0x0206060A}, /* ROB 0x0205050A,0x0206060A */
+ {0x0F007030, 0x05000000},
+ {0x0F007034, 0x00000003},
+ {0x0F007038, 0x190A0200}, /* ROB 0x110A0200,0x180A0200,0x1F0A0200 */
+ {0x0F00703C, 0x02101017}, /* ROB 0x02101010,0x02101018 */
+ {0x0F007040, 0x45171200}, /* ROB 0x45751200,0x450F1200 */
+ {0x0F007044, 0x11290D00}, /* ROB 0x110A0D00,0x111F0D00 */
+ {0x0F007048, 0x04080306},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x0010245F},
+ {0x0F007064, 0x00000010},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00007000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00004000}, /* Enable BW Improvement w/in Memcontroller */
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104}, /* Enable 2 Ports w/in X-Bar */
+ {0x0F007018, 0x01010000} /* Enable Start Bit w/in Memcontroller */
+};
+/* 100MHz-T3LPB(UMA_B) */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting100MHZ[] = { /* DPLL Clock Settings */
+ {0x0F000810, 0x00002F95},
+ {0x0F000820, 0x03F1369B},
+ {0x0F000840, 0x0FFF0000},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F00A044, 0x1FFFFFFF},
+ {0x0F00A040, 0x1F000000},
+ {0x0F003050, 0x00000021},
+ {0x0F00A084, 0x1CFFFFFF},
+ {0x0F00A080, 0x1C000000},
+ {0x0F007000, 0x00010001},
+ {0x0F007004, 0x01010100},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x01020200},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x06000000},
+ {0x0F007034, 0x00000004},
+ {0x0F007038, 0x1F080200},
+ {0x0F00703C, 0x0203021F},
+ {0x0F007040, 0x6E001200},
+ {0x0F007044, 0x011A0A00},
+ {0x0F007048, 0x03000305},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x00082ED6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00005000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00010000},
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F00A000, 0000000016},
+ {0x0F007018, 0x01010000}
+};
+/* 80MHz-T3LPB(UMA_B) */
+#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /* index for 0x0F007000 */
+static struct bcm_ddr_setting asT3LPB_DDRSetting80MHZ[] = { /* DPLL Clock Settings */
+ {0x0F000810, 0x00002F95},
+ {0x00F00820, 0x03F1269B},
+ {0x0F000840, 0x0FFF0000},
+ {0x0F000860, 0x00000000},
+ {0x0F000880, 0x000003DD},
+ {0x0F00A044, 0x1FFFFFFF}, /* Changed Source for X-bar and MIPS clock to APLL */
+ {0x0F00A040, 0x1F000000},
+ {0x0F003050, 0x00000021}, /* Flash/EEPROM Clock Div / Setting Flash Clock to 20MHz */
+ {0x0F00A084, 0x1CFFFFFF}, /* Dumping from here in Internal Memory */
+ {0x0F00A080, 0x1C000000},
+ {0x0F00A000, 0x00000016},
+ {0x0F007000, 0x00010001}, /* Memcontroller Default Values */
+ {0x0F007004, 0x01000000},
+ {0x0F007008, 0x01000001},
+ {0x0F00700C, 0x00000000},
+ {0x0F007010, 0x01000000},
+ {0x0F007014, 0x01000100},
+ {0x0F007018, 0x01000000},
+ {0x0F00701C, 0x01020000},
+ {0x0F007020, 0x04020107},
+ {0x0F007024, 0x00000007},
+ {0x0F007028, 0x02020200},
+ {0x0F00702C, 0x0204040A},
+ {0x0F007030, 0x04000000},
+ {0x0F007034, 0x00000002},
+ {0x0F007038, 0x1D060200},
+ {0x0F00703C, 0x1C22221D},
+ {0x0F007040, 0x8A116600},
+ {0x0F007044, 0x222D0800},
+ {0X0F007048, 0x02690204},
+ {0x0F00704C, 0x00000000},
+ {0x0F007050, 0x0100001C},
+ {0x0F007054, 0x00000000},
+ {0x0F007058, 0x00000000},
+ {0x0F00705C, 0x00000000},
+ {0x0F007060, 0x000A15D6},
+ {0x0F007064, 0x0000000A},
+ {0x0F007068, 0x00000000},
+ {0x0F00706C, 0x00000001},
+ {0x0F007070, 0x00004000},
+ {0x0F007074, 0x00000000},
+ {0x0F007078, 0x00000000},
+ {0x0F00707C, 0x00000000},
+ {0x0F007080, 0x00000000},
+ {0x0F007084, 0x00000000},
+ {0x0F007088, 0x01000001},
+ {0x0F00708C, 0x00000101},
+ {0x0F007090, 0x00000000},
+ {0x0F007094, 0x00010000},
+ {0x0F007098, 0x00000000},
+ {0x0F0070C8, 0x00000104},
+ {0x0F007018, 0x01010000}
};
-
int ddr_init(struct bcm_mini_adapter *Adapter)
{
- struct bcm_ddr_setting *psDDRSetting=NULL;
- ULONG RegCount=0;
+ struct bcm_ddr_setting *psDDRSetting = NULL;
+ ULONG RegCount = 0;
UINT value = 0;
- UINT uiResetValue = 0;
+ UINT uiResetValue = 0;
UINT uiClockSetting = 0;
int retval = STATUS_SUCCESS;
- switch (Adapter->chip_id)
- {
- case 0xbece3200:
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting=asT3LP_DDRSetting80MHz;
- RegCount=(sizeof(asT3LP_DDRSetting80MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- case DDR_100_MHZ:
- psDDRSetting=asT3LP_DDRSetting100MHz;
- RegCount=(sizeof(asT3LP_DDRSetting100MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- case DDR_133_MHZ:
- psDDRSetting=asT3LP_DDRSetting133MHz;
- RegCount=(sizeof(asT3LP_DDRSetting133MHz)/
- sizeof(struct bcm_ddr_setting));
- if(Adapter->bMipsConfig == MIPS_200_MHZ)
- {
+ switch (Adapter->chip_id) {
+ case 0xBECE3200:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSeting = asT3LP_DDRSetting80MHZ;
+ RegCount = (sizeof(asT3LP_DDRSettings80MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ case DDR_100_MHZ:
+ psDDRSetting = asT3LP_DDRSetting100MHZ;
+ RegCount = (sizeof(asT3LP_DDRSetting100MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ case DDR_133_MHZ:
+ psDDRSetting = asT3LP_DDRSetting133MHZ;
+ RegCount = (sizeof(asT3LP_DDRSetting133MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x03F13652;
- }
else
- {
uiClockSetting = 0x03F1365B;
- }
- break;
- default:
- return -EINVAL;
- }
-
+ break;
+ default:
+ return -EINVAL;
+ }
break;
case T3LPB:
case BCS220_2:
case BCS220_2BC:
case BCS250_BC:
- case BCS220_3 :
- /* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
- * (please check current value and additionally set these bits)
- */
- if( (Adapter->chip_id != BCS220_2) &&
- (Adapter->chip_id != BCS220_2BC) &&
- (Adapter->chip_id != BCS220_3) )
- {
- retval= rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
- BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
+ case BCS220_3:
+/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
+ * (please check current value and additonally set these bits
+ */
+ if ((Adapter->chip_id != BCS220_2) &&
+ (Adapter->chip_id != BCS220_2BC) &&
+ (Adapter->chip_id != BCS220_3)) {
+ retval = rdmalt(Adapter, (UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
+ BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL,
+ "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue |= 0x44;
- retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
- BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
+ retval = wrmalt(Adapter, (UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
+ BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL,
+ "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
}
- switch(Adapter->DDRSetting)
- {
-
-
-
- case DDR_80_MHZ:
- psDDRSetting = asT3LPB_DDRSetting80MHz;
- RegCount=(sizeof(asT3B_DDRSetting80MHz)/
- sizeof(struct bcm_ddr_setting));
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3LPB_DDRSetting80MGZ;
+ RegCount = (sizeof(asT3B_DDRsetting80MHZ)/
+ sizeof(struct bcm_ddr_setting));
break;
- case DDR_100_MHZ:
- psDDRSetting=asT3LPB_DDRSetting100MHz;
- RegCount=(sizeof(asT3B_DDRSetting100MHz)/
- sizeof(struct bcm_ddr_setting));
+ case DDR_100_MHZ:
+ psDDRsetting = asT3LB_DDRSetting100MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting100MHZ)/
+ sizeof(struct bcm_ddr_setting));
break;
- case DDR_133_MHZ:
- psDDRSetting = asT3LPB_DDRSetting133MHz;
- RegCount=(sizeof(asT3B_DDRSetting133MHz)/
- sizeof(struct bcm_ddr_setting));
-
- if(Adapter->bMipsConfig == MIPS_200_MHZ)
- {
+ case DDR_133_MHZ:
+ psDDRSetting = asT3LPB_DDRSetting133MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting133MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x03F13652;
- }
else
- {
uiClockSetting = 0x03F1365B;
- }
break;
-
- case DDR_160_MHZ:
- psDDRSetting = asT3LPB_DDRSetting160MHz;
- RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting);
-
- if(Adapter->bMipsConfig == MIPS_200_MHZ)
- {
+ case DDR_160_MHZ:
+ psDDRSetting = asT3LPB_DDRSetting160MHZ;
+ RegCount = (sizeof(asT3LPB_DDRSetting160MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x03F137D2;
- }
else
- {
uiClockSetting = 0x03F137DB;
- }
- }
break;
-
- case 0xbece0110:
- case 0xbece0120:
- case 0xbece0121:
- case 0xbece0130:
- case 0xbece0300:
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3_DDRSetting80MHz;
- RegCount = (sizeof(asT3_DDRSetting80MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- case DDR_100_MHZ:
- psDDRSetting = asT3_DDRSetting100MHz;
- RegCount = (sizeof(asT3_DDRSetting100MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- case DDR_133_MHZ:
- psDDRSetting = asT3_DDRSetting133MHz;
- RegCount = (sizeof(asT3_DDRSetting133MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- default:
- return -EINVAL;
- }
- case 0xbece0310:
- {
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3B_DDRSetting80MHz;
- RegCount=(sizeof(asT3B_DDRSetting80MHz)/
- sizeof(struct bcm_ddr_setting));
- break;
- case DDR_100_MHZ:
- psDDRSetting=asT3B_DDRSetting100MHz;
- RegCount=(sizeof(asT3B_DDRSetting100MHz)/
- sizeof(struct bcm_ddr_setting));
+ default:
+ return -EINVAL;
+ }
+ break;
+ case 0xBECE0110:
+ case 0xBECE0120:
+ case 0xBECE0121:
+ case 0xBECE0130:
+ case 0xBECE0300:
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY,
+ DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3_DDRSeting80MHZ;
+ RegCount = (sizeof(asT3_DDRSettings80MHZ)/
+ sizeof(struct bcm_ddr_setting));
break;
- case DDR_133_MHZ:
-
- if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected.
- {
- memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
- sizeof(asDPLL_266MHZ));
- psDDRSetting = asT3B_DDRSetting133MHz;
- RegCount=(sizeof(asT3B_DDRSetting133MHz)/
- sizeof(struct bcm_ddr_setting));
- }
- else
- {
- psDDRSetting = asT3B_DDRSetting133MHz;
- RegCount=(sizeof(asT3B_DDRSetting133MHz)/
- sizeof(struct bcm_ddr_setting));
- if(Adapter->bMipsConfig == MIPS_200_MHZ)
- {
+ case DDR_100_MHZ:
+ psDDRSetting = asT3_DDRSetting100MHZ;
+ RegCount = (sizeof(asT3_DDRSetting100MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ case DDR_133_MHZ:
+ psDDRSetting = asT3_DDRSetting133MHZ;
+ RegCount = (sizeof(asT3_DDRSetting133MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case 0xBECE0310:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3B_DDRSetting80MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting80MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ case DDR_100_MHZ:
+ psDDRSetting = asT3B_DDRSetting100MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting100MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ break;
+ case DDR_133_MHZ:
+ if (Adapter->bDPLLConfig == PLL_266_MHZ) { /* 266mhz phase locked loop selected */
+ memcpy(asT3B_DDRSettings133MHZ,
+ asDPLL_266MHZ, sizeof(asDPLL_266MHZ));
+ psDDRSetting = asT3B_DDRSetting133MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting133MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ } else {
+ psDDRSettings = asT3B_DDRSettings133MHZ;
+ RegCount = (sizeof(asT3B_DDRSetting133MHZ)/
+ sizeof(struct bcm_ddr_setting));
+ if (Adapter->bMipsConfig == MIPS_200_MHZ)
uiClockSetting = 0x07F13652;
- }
else
- {
uiClockSetting = 0x07F1365B;
- }
- }
- break;
- default:
- return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
}
break;
-
- }
default:
return -EINVAL;
}
-
- value=0;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Register Count is =%lu\n", RegCount);
- while(RegCount && !retval)
- {
- if(uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG)
- {
+ value = 0;
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY,
+ DBG_LVL_ALL, "Register Count is =%lu\n", RegCount);
+ while (RegCount && !retval) {
+ if (uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG)
value = uiClockSetting;
- }
else
- {
- value = psDDRSetting->ulRegValue;
- }
+ value = psDDRSetting->ulRegAddress;
retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, sizeof(value));
- if(STATUS_SUCCESS != retval) {
+ if (STATUS_SUCCESS != retval) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
break;
}
@@ -979,116 +878,108 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
RegCount--;
psDDRSetting++;
}
-
- if(Adapter->chip_id >= 0xbece3300 )
- {
-
+ if (Adapter->chip_id >= 0xBECE3300) {
mdelay(3);
- if( (Adapter->chip_id != BCS220_2)&&
- (Adapter->chip_id != BCS220_2BC)&&
- (Adapter->chip_id != BCS220_3))
- {
- /* drive MDDR to half in case of UMA-B: */
- uiResetValue = 0x01010001;
+ if ((Adapter->chip_id != BCS220_2) &&
+ (Adapter->chip_id != BCS220_2BC) &&
+ (Adapter->chip_id != BCS220_3)) {
+ uiResetValue = 0x01010001; /* drive MDDR to half of UMA_B */
retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x00040020;
retval = wrmalt(Adapter, (UINT)0x0F007094, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x01020101;
retval = wrmalt(Adapter, (UINT)0x0F00701c, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x01010000;
retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
}
mdelay(3);
- /* DC/DC standby change...
- * This is to be done only for Hybrid PMU mode.
- * with the current h/w there is no way to detect this.
- * and since we dont have internal PMU lets do it under UMA-B chip id.
- * we will change this when we will have internal PMU.
- */
- if(Adapter->PmuMode == HYBRID_MODE_7C)
- {
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+/* DC/DC standby change...
+ * This is to be done only for Hybrid PMU mode.
+ * with the current h/w there is no way to detect this.
+ * and since we dont have internal PMU lets do it under UMA-B chip id.
+ * we will change this when we will have internal PMU.
+*/
+ if (Adapter->PmuMode == HYBRID_MODE_7C) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x1322a8;
retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x132296;
retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- }
- else if(Adapter->PmuMode == HYBRID_MODE_6 )
- {
+ } else if (Adapter->PmuMode == HYBRID_MODE_6) {
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x6003229a;
retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
- retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
uiResetValue = 0x1322a8;
retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
- if(retval < 0) {
+ if (retval < 0) {
BCM_DEBUG_PRINT(Adapter, CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __func__, __LINE__);
return retval;
}
@@ -1098,182 +989,166 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
Adapter->bDDRInitDone = TRUE;
return retval;
}
-
int download_ddr_settings(struct bcm_mini_adapter *Adapter)
{
- struct bcm_ddr_setting *psDDRSetting=NULL;
- ULONG RegCount=0;
+ struct bcm_ddr_setting *psDDRSetting = NULL;
+ ULONG RegCount = 0;
unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY;
UINT value = 0;
int retval = STATUS_SUCCESS;
bool bOverrideSelfRefresh = false;
- switch (Adapter->chip_id)
- {
- case 0xbece3200:
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3LP_DDRSetting80MHz;
- RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
- psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ switch (Aapter->chip_id) {
+ case 0xBECE3200:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3LP_DDRSetting80MHZ;
+ RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHZ);
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ break;
+ case DDR_100_MHZ:
+ psDDRSetting = asT3LP_DDRSetting100MHZ;
+ RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHZ);
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
- case DDR_100_MHZ:
- psDDRSetting = asT3LP_DDRSetting100MHz;
- RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
- psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
- break;
- case DDR_133_MHZ:
- bOverrideSelfRefresh = TRUE;
- psDDRSetting = asT3LP_DDRSetting133MHz;
- RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
- RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
- break;
- default:
- return -EINVAL;
- }
+ case DDR_133_MHZ:
+ bOverrideSelfRefresh = true;
+ psDDRSetting = asT3LP_DDRSetting133MHZ;
+ RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHZ);
+ RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_113MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
break;
-
case T3LPB:
case BCS220_2:
case BCS220_2BC:
- case BCS250_BC:
- case BCS220_3 :
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3LPB_DDRSetting80MHz;
- RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
- psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ case BCS250_BC
+ case BCS220_3:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3LPB_DDRSetting80MHZ;
+ RegCount = ARRAY_SIZE(asT3LPB_DDRsetting80MHZ);
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
- case DDR_100_MHZ:
- psDDRSetting = asT3LPB_DDRSetting100MHz;
- RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
- psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
- break;
- case DDR_133_MHZ:
- bOverrideSelfRefresh = TRUE;
- psDDRSetting = asT3LPB_DDRSetting133MHz;
- RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
- break;
-
- case DDR_160_MHZ:
- bOverrideSelfRefresh = TRUE;
- psDDRSetting = asT3LPB_DDRSetting160MHz;
- RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz);
- RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
- psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
-
- break;
- default:
- return -EINVAL;
- }
+ case DDR_100_MHZ:
+ psDDRSetting = asT3LPB_DDRSetting100MHZ;
+ RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHZ);
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ break;
+ case DDR_133_MHZ:
+ bOverrideSelfRefresh = true;
+ psDDRSetting = asT3LPB_DDRSetting133MHZ;
+ RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHZ);
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ psDDRsetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ break;
+ case DDR_160_MHZ:
+ bOverrideSelfRefresh = true;
+ psDDRSetting = asT3LPB_DDRSetting160MHZ;
+ RegCount = ARRAY_SIZE(asT3LPB_DDRSetting);
+ RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
+ psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
break;
- case 0xbece0300:
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3_DDRSetting80MHz;
- RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
- RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
- psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ case 0xBECE0300:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3_DDRSetting80MHZ;
+ RegCount = ARRAY_SIZE(asT3_DDRSetting80MHZ);
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ
+ psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
- case DDR_100_MHZ:
- psDDRSetting = asT3_DDRSetting100MHz;
- RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
- RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
- psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
- break;
- case DDR_133_MHZ:
- psDDRSetting = asT3_DDRSetting133MHz;
- RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
- RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- break;
- default:
- return -EINVAL;
- }
- break;
- case 0xbece0310:
- {
- switch (Adapter->DDRSetting)
- {
- case DDR_80_MHZ:
- psDDRSetting = asT3B_DDRSetting80MHz;
- RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
- psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
- break;
- case DDR_100_MHZ:
- psDDRSetting = asT3B_DDRSetting100MHz;
- RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
- psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
- break;
- case DDR_133_MHZ:
- bOverrideSelfRefresh = TRUE;
- psDDRSetting = asT3B_DDRSetting133MHz;
- RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
- RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
- psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
- break;
- }
- break;
- }
+ case DDR_100_MHZ:
+ psDDRSetting = asT3_DDRSetting;
+ RegCount = ARRAY_SIZE(asT3_DDRSetting100MHZ);
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ break;
+ case DDR_133_MHZ:
+ psDDRSetting = asT3_DDRSetting133MHZ;
+ RegCount = ARRAY_SIZE(asT3_DDRSetting133MHZ);
+ RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case 0xBECE0310:
+ switch (Adapter->DDRSetting) {
+ case DDR_80_MHZ:
+ psDDRSetting = asT3B_DDRSetting80MHZ;
+ RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHZ);
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
+ break;
+ case DDR_100_MHZ:
+ psDDRSetting = asT3B_DDRSetting100MHZ;
+ RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHZ);
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
+ break;
+ case DDR_133_MHZ:
+ bOverrideSelfRefresh = true;
+ psDDRSetting = asT3B_DDRSetting133MHZ;
+ RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHZ);
+ RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
default:
return -EINVAL;
}
- //total number of Register that has to be dumped
- value =RegCount ;
+ /* total number of Register that has to be dumped */
+ value = RegCount;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
- if(retval)
- {
+ if (retval) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
return retval;
}
ul_ddr_setting_load_addr += sizeof(ULONG);
/*signature */
- value =(0x1d1e0dd0);
+ value = (0x1d1e0dd0);
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
- if(retval)
- {
+ if (retval) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
return retval;
}
ul_ddr_setting_load_addr += sizeof(ULONG);
- RegCount*=(sizeof(struct bcm_ddr_setting)/sizeof(ULONG));
+ RegCount *= (sizeof(struct bcm_ddr_setting)/sizeof(ULONG));
- while(RegCount && !retval)
- {
- value = psDDRSetting->ulRegAddress ;
- retval = wrmalt( Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
+ while (RegCount && !retval) {
+ value = psDDRSetting->ulRegAddress;
+ retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
ul_ddr_setting_load_addr += sizeof(ULONG);
- if(!retval)
- {
- if(bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018))
- {
- value = (psDDRSetting->ulRegValue |(1<<8));
- if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr,
- &value, sizeof(value))){
+ if (!retval) {
+ if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018)) {
+ value = (psDDRSetting->ulRegValue | (1<<8));
+ if (STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr,
+ &value, sizeof(value))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
break;
}
- }
- else
- {
+ } else {
value = psDDRSetting->ulRegValue;
- if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr ,
- &value, sizeof(value))){
+ if (STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr ,
+ &value, sizeof(value))) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "%s:%d\n", __func__, __LINE__);
break;
}
@@ -1285,5 +1160,3 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
}
return retval;
}
-
-
--
1.8.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
