[PATCH 08/28] staging: comedi: s626: remove I2CR and I2CW macros

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The `I2CR` and `I2CW` macros expand to the I2C read and write addresses,
respectively.  They are only used in one place each and include the name
of a local variable `devpriv` in their expansion.

Get rid of the macros and expand them in place.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/s626.c | 4 ++--
 drivers/staging/comedi/drivers/s626.h | 6 ------
 2 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 58f2208..443e954 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -309,7 +309,7 @@ static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
 	 *  Byte1 = EEPROM internal target address.
 	 *  Byte0 = Not sent.
 	 */
-	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CW) |
+	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, devpriv->I2CAdrs) |
 			      I2C_B1(I2C_ATTRSTOP, addr) |
 			      I2C_B0(I2C_ATTRNOP, 0)))
 		/* Abort function and declare error if handshake failed. */
@@ -321,7 +321,7 @@ static uint8_t I2Cread(struct comedi_device *dev, uint8_t addr)
 	 *  Byte1 receives uint8_t from EEPROM.
 	 *  Byte0 = Not sent.
 	 */
-	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, I2CR) |
+	if (I2Chandshake(dev, I2C_B2(I2C_ATTRSTART, (devpriv->I2CAdrs | 1)) |
 			      I2C_B1(I2C_ATTRSTOP, 0) |
 			      I2C_B0(I2C_ATTRNOP, 0)))
 		/* Abort function and declare error if handshake failed. */
diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h
index f7ed4af..939b359 100644
--- a/drivers/staging/comedi/drivers/s626.h
+++ b/drivers/staging/comedi/drivers/s626.h
@@ -384,12 +384,6 @@
 #define I2C_ATTRSTOP		0x1	/* I2C attribute STOP. */
 #define I2C_ATTRNOP		0x0	/* I2C attribute NOP. */
 
-/* I2C read command  | EEPROM address. */
-#define I2CR			(devpriv->I2CAdrs | 1)
-
-/* I2C write command | EEPROM address. */
-#define I2CW			(devpriv->I2CAdrs)
-
 /* Code macros used for constructing I2C command bytes. */
 #define I2C_B2(ATTR, VAL)	(((ATTR) << 6) | ((VAL) << 24))
 #define I2C_B1(ATTR, VAL)	(((ATTR) << 4) | ((VAL) << 16))
-- 
1.8.3.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux