Cleanup the multi-line comments to follow the CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ni_at_ao.c | 69 ++++++++++++++++--------------- 1 file changed, 35 insertions(+), 34 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c index e1be07a..ff1d4ad 100644 --- a/drivers/staging/comedi/drivers/ni_at_ao.c +++ b/drivers/staging/comedi/drivers/ni_at_ao.c @@ -1,39 +1,37 @@ /* - comedi/drivers/ni_at_ao.c - Driver for NI AT-AO-6/10 boards - - COMEDI - Linux Control and Measurement Device Interface - Copyright (C) 2000,2002 David A. Schleef <ds@xxxxxxxxxxx> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. -*/ -/* -Driver: ni_at_ao -Description: National Instruments AT-AO-6/10 -Devices: [National Instruments] AT-AO-6 (at-ao-6), AT-AO-10 (at-ao-10) -Status: should work -Author: ds -Updated: Sun Dec 26 12:26:28 EST 2004 - -Configuration options: - [0] - I/O port base address - [1] - IRQ (unused) - [2] - DMA (unused) - [3] - analog output range, set by jumpers on hardware (0 for -10 to 10V - bipolar, 1 for 0V to 10V unipolar) - -*/ + * ni_at_ao.c + * Driver for NI AT-AO-6/10 boards + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2000,2002 David A. Schleef <ds@xxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + /* - * Register-level programming information can be found in NI - * document 320379.pdf. + * Driver: ni_at_ao + * Description: National Instruments AT-AO-6/10 + * Devices: (National Instruments) AT-AO-6 [at-ao-6] + * (National Instruments) AT-AO-10 [at-ao-10] + * Status: should work + * Author: David A. Schleef <ds@xxxxxxxxxxx> + * Updated: Sun Dec 26 12:26:28 EST 2004 + * + * Configuration options: + * [0] - I/O port base address + * [1] - IRQ (unused) + * [2] - DMA (unused) + * [3] - analog output range, set by jumpers on hardware + * 0 for -10 to 10V bipolar + * 1 for 0V to 10V unipolar */ #include <linux/module.h> @@ -44,6 +42,9 @@ Configuration options: /* * Register map + * + * Register-level programming information can be found in NI + * document 320379.pdf. */ #define ATAO_DIO_REG 0x00 #define ATAO_CFG2_REG 0x02 -- 1.8.3.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
