For aesthetics, sort the register map defines so the normal registers are listed first and then alternate registers (when the GRP2WR bit is set). Convert the register bit defines into bit shifts to make them clear. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ni_at_ao.c | 161 ++++++++++++++---------------- 1 file changed, 77 insertions(+), 84 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c index d349b1f..b7d31f7 100644 --- a/drivers/staging/comedi/drivers/ni_at_ao.c +++ b/drivers/staging/comedi/drivers/ni_at_ao.c @@ -39,105 +39,98 @@ Configuration options: #include <linux/module.h> #include "../comedidev.h" -/* board egisters */ -/* registers with _2_ are accessed when GRP2WR is set in CFG1 */ - -#define ATAO_2_DMATCCLR 0x00 /* W 16 */ +/* + * Register map + */ #define ATAO_DIN 0x00 /* R 16 */ #define ATAO_DOUT 0x00 /* W 16 */ - #define ATAO_CFG2 0x02 /* W 16 */ -#define CALLD1 0x8000 -#define CALLD0 0x4000 -#define FFRTEN 0x2000 -#define DAC2S8 0x1000 -#define DAC2S6 0x0800 -#define DAC2S4 0x0400 -#define DAC2S2 0x0200 -#define DAC2S0 0x0100 -#define LDAC8 0x0080 -#define LDAC6 0x0040 -#define LDAC4 0x0020 -#define LDAC2 0x0010 -#define LDAC0 0x0008 -#define PROMEN 0x0004 -#define SCLK 0x0002 -#define SDATA 0x0001 - -#define ATAO_2_INT1CLR 0x02 /* W 16 */ - +#define CALLD1 (1 << 15) +#define CALLD0 (1 << 14) +#define FFRTEN (1 << 13) +#define DAC2S8 (1 << 12) +#define DAC2S6 (1 << 11) +#define DAC2S4 (1 << 10) +#define DAC2S2 (1 << 9) +#define DAC2S0 (1 << 8) +#define LDAC8 (1 << 7) +#define LDAC6 (1 << 6) +#define LDAC4 (1 << 5) +#define LDAC2 (1 << 4) +#define LDAC0 (1 << 3) +#define PROMEN (1 << 2) +#define SCLK (1 << 1) +#define SDATA (1 << 0) #define ATAO_CFG3 0x04 /* W 16 */ -#define DMAMODE 0x0040 -#define CLKOUT 0x0020 -#define RCLKEN 0x0010 -#define DOUTEN2 0x0008 -#define DOUTEN1 0x0004 -#define EN2_5V 0x0002 -#define SCANEN 0x0001 - -#define ATAO_2_INT2CLR 0x04 /* W 16 */ - +#define DMAMODE (1 << 6) +#define CLKOUT (1 << 5) +#define RCLKEN (1 << 4) +#define DOUTEN2 (1 << 3) +#define DOUTEN1 (1 << 2) +#define EN2_5V (1 << 1) +#define SCANEN (1 << 0) #define ATAO_82C53_BASE 0x06 /* RW 8 */ - #define ATAO_82C53_CNTR1 0x06 /* RW 8 */ #define ATAO_82C53_CNTR2 0x07 /* RW 8 */ #define ATAO_82C53_CNTR3 0x08 /* RW 8 */ #define ATAO_82C53_CNTRCMD 0x09 /* W 8 */ -#define CNTRSEL1 0x80 -#define CNTRSEL0 0x40 -#define RWSEL1 0x20 -#define RWSEL0 0x10 -#define MODESEL2 0x08 -#define MODESEL1 0x04 -#define MODESEL0 0x02 -#define BCDSEL 0x01 +#define CNTRSEL1 (1 << 7) +#define CNTRSEL0 (1 << 6) +#define RWSEL1 (1 << 5) +#define RWSEL0 (1 << 4) +#define MODESEL2 (1 << 3) +#define MODESEL1 (1 << 2) +#define MODESEL0 (1 << 1) +#define BCDSEL (1 << 0) /* read-back command */ -#define COUNT 0x20 -#define STATUS 0x10 -#define CNTR3 0x08 -#define CNTR2 0x04 -#define CNTR1 0x02 +#define COUNT (1 << 5) +#define STATUS (1 << 4) +#define CNTR3 (1 << 3) +#define CNTR2 (1 << 2) +#define CNTR1 (1 << 1) /* status */ -#define OUT 0x80 -#define _NULL 0x40 -#define RW1 0x20 -#define RW0 0x10 -#define MODE2 0x08 -#define MODE1 0x04 -#define MODE0 0x02 -#define BCD 0x01 - -#define ATAO_2_RTSISHFT 0x06 /* W 8 */ -#define ATAO_RTSISHFT_RSI (1 << 0) - -#define ATAO_2_RTSISTRB 0x07 /* W 8 */ - +#define OUT (1 << 7) +#define _NULL (1 << 6) +#define RW1 (1 << 5) +#define RW0 (1 << 4) +#define MODE2 (1 << 3) +#define MODE1 (1 << 2) +#define MODE0 (1 << 1) +#define BCD (1 << 0) #define ATAO_CFG1 0x0a /* W 16 */ -#define EXTINT2EN 0x8000 -#define EXTINT1EN 0x4000 -#define CNTINT2EN 0x2000 -#define CNTINT1EN 0x1000 -#define TCINTEN 0x0800 -#define CNT1SRC 0x0400 -#define CNT2SRC 0x0200 -#define FIFOEN 0x0100 -#define GRP2WR 0x0080 -#define EXTUPDEN 0x0040 -#define DMARQ 0x0020 -#define DMAEN 0x0010 -#define CH_mask 0x000f +#define EXTINT2EN (1 << 15) +#define EXTINT1EN (1 << 14) +#define CNTINT2EN (1 << 13) +#define CNTINT1EN (1 << 12) +#define TCINTEN (1 << 11) +#define CNT1SRC (1 << 10) +#define CNT2SRC (1 << 9) +#define FIFOEN (1 << 8) +#define GRP2WR (1 << 7) +#define EXTUPDEN (1 << 6) +#define DMARQ (1 << 5) +#define DMAEN (1 << 4) +#define CH_mask (0xf << 0) #define ATAO_STATUS 0x0a /* R 16 */ -#define FH 0x0040 -#define FE 0x0020 -#define FF 0x0010 -#define INT2 0x0008 -#define INT1 0x0004 -#define TCINT 0x0002 -#define PROMOUT 0x0001 - +#define FH (1 << 6) +#define FE (1 << 5) +#define FF (1 << 4) +#define INT2 (1 << 3) +#define INT1 (1 << 2) +#define TCINT (1 << 1) +#define PROMOUT (1 << 0) #define ATAO_FIFO_WRITE 0x0c /* W 16 */ #define ATAO_FIFO_CLEAR 0x0c /* R 16 */ -#define ATAO_DACn(x) (0x0c + 2*(x)) /* W */ +#define ATAO_DACn(x) (0x0c + ((x) * 2)) /* W */ + +/* registers with _2_ are accessed when GRP2WR is set in CFG1 */ + +#define ATAO_2_DMATCCLR 0x00 /* W 16 */ +#define ATAO_2_INT1CLR 0x02 /* W 16 */ +#define ATAO_2_INT2CLR 0x04 /* W 16 */ +#define ATAO_2_RTSISHFT 0x06 /* W 8 */ +#define ATAO_RTSISHFT_RSI (1 << 0) +#define ATAO_2_RTSISTRB 0x07 /* W 8 */ /* * Board descriptions for two imaginary boards. Describing the -- 1.8.3.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
