Correct spelling typo in rtl8188eu/include
Signed-off-by: Masanari Iida <standby24x7@xxxxxxxxx>
---
drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h | 2 +-
drivers/staging/rtl8188eu/include/odm_debug.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_cmd.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_led.h | 4 ++--
drivers/staging/rtl8188eu/include/rtw_mlme.h | 12 ++++++------
drivers/staging/rtl8188eu/include/rtw_mlme_ext.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h | 2 +-
drivers/staging/rtl8188eu/include/rtw_rf.h | 2 +-
drivers/staging/rtl8188eu/include/sta_info.h | 2 +-
drivers/staging/rtl8188eu/include/wifi.h | 2 +-
10 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
index 0e06d29..9f2969b 100644
--- a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
@@ -26,7 +26,7 @@
/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
/* 3. RF register 0x00-2E */
/* 4. Bit Mask for BB/RF register */
-/* 5. Other defintion for BB/RF R/W */
+/* 5. Other definition for BB/RF R/W */
/* */
diff --git a/drivers/staging/rtl8188eu/include/odm_debug.h b/drivers/staging/rtl8188eu/include/odm_debug.h
index a9ba6df..622f4c1 100644
--- a/drivers/staging/rtl8188eu/include/odm_debug.h
+++ b/drivers/staging/rtl8188eu/include/odm_debug.h
@@ -27,7 +27,7 @@
/* Define the debug levels */
/* */
/* 1. DBG_TRACE and DBG_LOUD are used for normal cases. */
-/* They can help SW engineer to develope or trace states changed */
+/* They can help SW engineer to develop or trace states changed */
/* and also help HW enginner to trace every operation to and from HW, */
/* e.g IO, Tx, Rx. */
/* */
diff --git a/drivers/staging/rtl8188eu/include/rtw_cmd.h b/drivers/staging/rtl8188eu/include/rtw_cmd.h
index 819285b..8cafd7a 100644
--- a/drivers/staging/rtl8188eu/include/rtw_cmd.h
+++ b/drivers/staging/rtl8188eu/include/rtw_cmd.h
@@ -745,7 +745,7 @@ struct TDLSoption_param
Result:
0x00: success
-0x01: sucess, and check Response.
+0x01: success, and check Response.
0x02: cmd ignored due to duplicated sequcne number
0x03: cmd dropped due to invalid cmd code
0x04: reserved.
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h
index 2e61804..d0da4fd 100644
--- a/drivers/staging/rtl8188eu/include/rtw_led.h
+++ b/drivers/staging/rtl8188eu/include/rtw_led.h
@@ -163,14 +163,14 @@ enum LED_STRATEGY_871x {
void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction);
struct led_priv{
- /* add for led controll */
+ /* add for led control */
struct LED_871x SwLed0;
struct LED_871x SwLed1;
enum LED_STRATEGY_871x LedStrategy;
u8 bRegUseLed;
void (*LedControlHandler)(struct adapter *padapter,
enum LED_CTL_MODE LedAction);
- /* add for led controll */
+ /* add for led control */
};
#define rtw_led_control(adapt, action) \
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme.h b/drivers/staging/rtl8188eu/include/rtw_mlme.h
index 22538e6..4a7143e 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme.h
@@ -53,11 +53,11 @@
#define WIFI_SITE_MONITOR 0x00000800 /* to indicate the station is under site surveying */
#define WIFI_MP_STATE 0x00010000
-#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continous tx background */
-#define WIFI_MP_CTX_ST 0x00040000 /* in continous tx with single-tone */
-#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continous tx background due to out of skb */
-#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continous tx */
-#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continous tx with carrier suppression */
+#define WIFI_MP_CTX_BACKGROUND 0x00020000 /* in continuous tx background */
+#define WIFI_MP_CTX_ST 0x00040000 /* in continuous tx with single-tone */
+#define WIFI_MP_CTX_BACKGROUND_PENDING 0x00080000 /* pending in continuous tx background due to out of skb */
+#define WIFI_MP_CTX_CCK_HW 0x00100000 /* in continuous tx */
+#define WIFI_MP_CTX_CCK_CS 0x00200000 /* in continuous tx with carrier suppression */
#define WIFI_MP_LPBK_STATE 0x00400000
#define _FW_UNDER_LINKING WIFI_UNDER_LINKING
@@ -239,7 +239,7 @@ struct wifidirect_info {
u8 profileindex; /* Used to point to the index of profileinfo array */
u8 peer_operating_ch;
u8 find_phase_state_exchange_cnt;
- /* The device password ID for group negotation */
+ /* The device password ID for group negotiation */
u16 device_password_id_for_nego;
u8 negotiation_dialog_token;
/* SSID information for group negotitation */
diff --git a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
index 853ab80..b1bfa2e 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mlme_ext.h
@@ -107,7 +107,7 @@ extern unsigned char WMM_PARA_OUI[];
/* Note: */
/* We just add new channel plan when the new channel plan is different
* from any of the following channel plan. */
-/* If you just wnat to customize the acitions(scan period or join actions)
+/* If you just want to customize the actions(scan period or join actions)
* about one of the channel plan, */
/* customize them in struct rt_channel_info in the RT_CHANNEL_LIST. */
enum RT_CHANNEL_DOMAIN {
diff --git a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
index 3ad2207..30fd17f 100644
--- a/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
+++ b/drivers/staging/rtl8188eu/include/rtw_mp_phy_regdef.h
@@ -56,7 +56,7 @@
/* 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
/* 3. RF register 0x00-2E */
/* 4. Bit Mask for BB/RF register */
-/* 5. Other defintion for BB/RF R/W */
+/* 5. Other definition for BB/RF R/W */
/* */
diff --git a/drivers/staging/rtl8188eu/include/rtw_rf.h b/drivers/staging/rtl8188eu/include/rtw_rf.h
index 089ecee..2df8837 100644
--- a/drivers/staging/rtl8188eu/include/rtw_rf.h
+++ b/drivers/staging/rtl8188eu/include/rtw_rf.h
@@ -119,7 +119,7 @@ enum ht_channel_width {
};
/* */
-/* Represent Extention Channel Offset in HT Capabilities */
+/* Represent Extension Channel Offset in HT Capabilities */
/* This is available only in 40Mhz mode. */
/* */
enum ht_extchnl_offset {
diff --git a/drivers/staging/rtl8188eu/include/sta_info.h b/drivers/staging/rtl8188eu/include/sta_info.h
index 3ed2a39..3e909db 100644
--- a/drivers/staging/rtl8188eu/include/sta_info.h
+++ b/drivers/staging/rtl8188eu/include/sta_info.h
@@ -338,7 +338,7 @@ struct sta_priv {
*/
struct sta_info *sta_aid[NUM_STA];
- u16 sta_dz_bitmap;/* only support 15 stations, staion aid bitmap
+ u16 sta_dz_bitmap;/* only support 15 stations, station aid bitmap
* for sleeping sta. */
u16 tim_bitmap; /* only support 15 stations, aid=0~15 mapping
* bit0~bit15 */
diff --git a/drivers/staging/rtl8188eu/include/wifi.h b/drivers/staging/rtl8188eu/include/wifi.h
index a615659..84e5199 100644
--- a/drivers/staging/rtl8188eu/include/wifi.h
+++ b/drivers/staging/rtl8188eu/include/wifi.h
@@ -984,7 +984,7 @@ enum ht_cap_ampdu_factor {
#define P2P_PROVISION_TIMEOUT 5000
/* 3 seconds timeout for sending the prov disc request concurrent mode */
#define P2P_CONCURRENT_PROVISION_TIME 3000
-/* 5 seconds timeout for receiving the group negotation response */
+/* 5 seconds timeout for receiving the group negotiation response */
#define P2P_GO_NEGO_TIMEOUT 5000
/* 3 seconds timeout for sending the negotiation request under concurrent mode */
#define P2P_CONCURRENT_GO_NEGO_TIME 3000
--
1.8.4.474.g128a96c
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
