Define the magic numbers used with the mode register. For the PCL711B board, the mode register also contains the irq number that is being used. Introduce a helper function to write to the mode register so that this irq number is always included when needed. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/pcl711.c | 40 ++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c index 1386d8f..1d0e444 100644 --- a/drivers/staging/comedi/drivers/pcl711.c +++ b/drivers/staging/comedi/drivers/pcl711.c @@ -83,7 +83,14 @@ supported. #define PCL711_MUX_CS0 (1 << 4) #define PCL711_MUX_CS1 (1 << 5) #define PCL711_MUX_DIFF (PCL711_MUX_CS0 | PCL711_MUX_CS1) -#define PCL711_MODE 0x0b +#define PCL711_MODE_REG 0x0b +#define PCL711_MODE_DEFAULT (0 << 0) +#define PCL711_MODE_SOFTTRIG (1 << 0) +#define PCL711_MODE_EXT (2 << 0) +#define PCL711_MODE_EXT_IRQ (3 << 0) +#define PCL711_MODE_PACER (4 << 0) +#define PCL711_MODE_PACER_IRQ (6 << 0) +#define PCL711_MODE_IRQ(x) (((x) & 0x7) << 4) #define PCL711_SOFTTRIG 0x0c #define PCL711_DO_LO 0x0d #define PCL711_DO_HI 0x0e @@ -183,6 +190,16 @@ struct pcl711_private { unsigned int divisor2; }; +static void pcl711_ai_set_mode(struct comedi_device *dev, unsigned int mode) +{ + struct pcl711_private *devpriv = dev->private; + + if (mode == PCL711_MODE_EXT_IRQ || mode == PCL711_MODE_PACER_IRQ) + mode |= devpriv->mode; + + outb(mode, dev->iobase + PCL711_MODE_REG); +} + static unsigned int pcl711_ai_get_sample(struct comedi_device *dev, struct comedi_subdevice *s) { @@ -214,9 +231,9 @@ static irqreturn_t pcl711_interrupt(int irq, void *d) /* FIXME! Nothing else sets ntrig! */ if (!(--devpriv->ntrig)) { if (board->is_8112) - outb(1, dev->iobase + PCL711_MODE); + pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG); else - outb(0, dev->iobase + PCL711_MODE); + pcl711_ai_set_mode(dev, PCL711_MODE_DEFAULT); s->async->events |= COMEDI_CB_EOA; } @@ -274,11 +291,7 @@ static int pcl711_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s, pcl711_set_changain(dev, insn->chanspec); for (n = 0; n < insn->n; n++) { - /* - * Write the correct mode (software polling) and start polling - * by writing to the trigger register - */ - outb(1, dev->iobase + PCL711_MODE); + pcl711_ai_set_mode(dev, PCL711_MODE_SOFTTRIG); if (!board->is_8112) outb(0, dev->iobase + PCL711_SOFTTRIG); @@ -368,7 +381,6 @@ static int pcl711_ai_cmdtest(struct comedi_device *dev, static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { - struct pcl711_private *devpriv = dev->private; int timer1, timer2; struct comedi_cmd *cmd = &s->async->cmd; @@ -400,13 +412,9 @@ static int pcl711_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) /* clear pending interrupts (just in case) */ outb(0, dev->iobase + PCL711_CLRINTR); - /* - * Set mode to IRQ transfer - */ - outb(devpriv->mode | 6, dev->iobase + PCL711_MODE); + pcl711_ai_set_mode(dev, PCL711_MODE_PACER_IRQ); } else { - /* external trigger */ - outb(devpriv->mode | 3, dev->iobase + PCL711_MODE); + pcl711_ai_set_mode(dev, PCL711_MODE_EXT_IRQ); } return 0; @@ -510,7 +518,7 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it) * mode register. */ if (board->is_pcl711b) - devpriv->mode = (dev->irq << 4); + devpriv->mode = PCL711_MODE_IRQ(dev->irq); } } -- 1.8.3.2 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel