[PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The correct way for a driver to specify the coherent DMA mask is
not to directly access the field in the struct device, but to use
dma_set_coherent_mask().  Only arch and bus code should access this
member directly.

Convert all direct write accesses to using the correct API.

Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
---
 drivers/ata/pata_ixp4xx_cf.c             |    5 ++++-
 drivers/gpu/drm/exynos/exynos_drm_drv.c  |    6 +++++-
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c |    5 +++--
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 1ec53f8..ddf470c 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct ata_port *ap;
 	struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
+	int ret;
 
 	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* acquire resources and fill host */
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
 
 	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
 	data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
index bb82ef7..81192d0 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
@@ -286,7 +286,11 @@ static struct drm_driver exynos_drm_driver = {
 
 static int exynos_drm_platform_probe(struct platform_device *pdev)
 {
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	int ret;
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
 
 	return drm_platform_init(&exynos_drm_driver, pdev);
 }
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index acf6678..701c4c1 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev)
 	}
 
 	/* set dma mask for device */
-	/* NOTE: this is a workaround for the hwmod not initializing properly */
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto fail;
 
 	omap_dmm->dummy_pa = page_to_phys(omap_dmm->dummy_page);
 
-- 
1.7.4.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux