[RFC/RFT 22/33] staging: r8188eu: Add files for new driver - part 22

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This commit adds files include/Hal8188EFWImg_CE.h, include/Hal8188EPhyCfg.h,
include/Hal8188EPhyReg.h, include/Hal8188EPwrSeq.h, include/Hal8188ERateAdaptive.h,
include/Hal8188EReg.h, include/HalHWImg8188E_BB.h, include/HalHWImg8188E_FW.h,
include/HalHWImg8188E_MAC.h, include/HalHWImg8188E_RF.h, include/HalPhyRf.h,
include/HalPhyRf_8188e.h, include/HalPwrSeqCmd.h, and include/HalVerDef.h.

Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
 .../staging/rtl8188eu/include/Hal8188EFWImg_CE.h   |   28 +
 drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h |  276 +++++
 drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h | 1094 ++++++++++++++++++++
 drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h |  176 ++++
 .../rtl8188eu/include/Hal8188ERateAdaptive.h       |   75 ++
 drivers/staging/rtl8188eu/include/Hal8188EReg.h    |   46 +
 .../staging/rtl8188eu/include/HalHWImg8188E_BB.h   |   44 +
 .../staging/rtl8188eu/include/HalHWImg8188E_FW.h   |   34 +
 .../staging/rtl8188eu/include/HalHWImg8188E_MAC.h  |   30 +
 .../staging/rtl8188eu/include/HalHWImg8188E_RF.h   |   30 +
 drivers/staging/rtl8188eu/include/HalPhyRf.h       |   30 +
 drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h |   63 ++
 drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h   |  128 +++
 drivers/staging/rtl8188eu/include/HalVerDef.h      |  167 +++
 14 files changed, 2221 insertions(+)
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
 create mode 100644 drivers/staging/rtl8188eu/include/Hal8188EReg.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalPhyRf.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
 create mode 100644 drivers/staging/rtl8188eu/include/HalVerDef.h

diff --git a/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h b/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
new file mode 100644
index 0000000..949c33b
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EFWImg_CE.h
@@ -0,0 +1,28 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+#ifndef __INC_HAL8188E_FW_IMG_H
+#define __INC_HAL8188E_FW_IMG_H
+
+/* V10(1641) */
+#define Rtl8188EFWImgArrayLength 13904
+
+extern const u8 Rtl8188EFwImgArray[Rtl8188EFWImgArrayLength];
+
+#endif /* __INC_HAL8188E_FW_IMG_H */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
new file mode 100644
index 0000000..c4769e2
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyCfg.h
@@ -0,0 +1,276 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT			5
+#define MAX_STALL_TIME			50		/* us */
+#define AntennaDiversityValue		0x80
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define Reset_Cnt_Limit			3
+
+#define IQK_MAC_REG_NUM			4
+#define IQK_ADDA_REG_NUM		16
+#define IQK_BB_REG_NUM			9
+#define HP_THERMAL_NUM			8
+
+#define MAX_AGGR_NUM			0x07
+
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+	CmdID_End,
+	CmdID_SetTxPowerLevel,
+	CmdID_BBRegWrite10,
+	CmdID_WritePortUlong,
+	CmdID_WritePortUshort,
+	CmdID_WritePortUchar,
+	CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+	enum sw_chnl_cmd_id CmdID;
+	u32 Para1;
+	u32 Para2;
+	u32 msDelay;
+};
+
+enum hw90_block {
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4, /*  Never use this */
+};
+
+enum rf_radio_path {
+	RF_PATH_A = 0,			/* Radio Path A */
+	RF_PATH_B = 1,			/* Radio Path B */
+	RF_PATH_C = 2,			/* Radio Path C */
+	RF_PATH_D = 3,			/* Radio Path D */
+};
+
+#define MAX_PG_GROUP 13
+
+#define	RF_PATH_MAX			2
+#define		MAX_RF_PATH		RF_PATH_MAX
+#define		MAX_TX_COUNT		4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER		14	/*  14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G		6	/*  ch1~2, ch3~5, ch6~8,
+						 *ch9~11, ch12~13, CH 14
+						 * total three groups */
+#define CHANNEL_GROUP_MAX_88E		6
+
+enum wireless_mode {
+	WIRELESS_MODE_UNKNOWN = 0x00,
+	WIRELESS_MODE_A			= BIT2,
+	WIRELESS_MODE_B			= BIT0,
+	WIRELESS_MODE_G			= BIT1,
+	WIRELESS_MODE_AUTO		= BIT5,
+	WIRELESS_MODE_N_24G		= BIT3,
+	WIRELESS_MODE_N_5G		= BIT4,
+	WIRELESS_MODE_AC		= BIT6
+};
+
+enum phy_rate_tx_offset_area {
+	RA_OFFSET_LEGACY_OFDM1,
+	RA_OFFSET_LEGACY_OFDM2,
+	RA_OFFSET_HT_OFDM1,
+	RA_OFFSET_HT_OFDM2,
+	RA_OFFSET_HT_OFDM3,
+	RA_OFFSET_HT_OFDM4,
+	RA_OFFSET_HT_CCK,
+};
+
+/* BB/RF related */
+enum RF_TYPE_8190P {
+	RF_TYPE_MIN,		/*  0 */
+	RF_8225 = 1,		/*  1 11b/g RF for verification only */
+	RF_8256 = 2,		/*  2 11b/g/n */
+	RF_8258 = 3,		/*  3 11a/b/g/n RF */
+	RF_6052 = 4,		/*  4 11b/g/n RF */
+	/*  TODO: We should remove this psudo PHY RF after we get new RF. */
+	RF_PSEUDO_11N = 5,	/*  5, It is a temporality RF. */
+};
+
+struct bb_reg_def {
+	u32 rfintfs;		/*  set software control: */
+				/*	0x870~0x877[8 bytes] */
+	u32 rfintfi;		/*  readback data: */
+				/*	0x8e0~0x8e7[8 bytes] */
+	u32 rfintfo;		/*  output data: */
+				/*	0x860~0x86f [16 bytes] */
+	u32 rfintfe;		/*  output enable: */
+				/*	0x860~0x86f [16 bytes] */
+	u32 rf3wireOffset;	/*  LSSI data: */
+				/*	0x840~0x84f [16 bytes] */
+	u32 rfLSSI_Select;	/*  BB Band Select: */
+				/*	0x878~0x87f [8 bytes] */
+	u32 rfTxGainStage;	/*  Tx gain stage: */
+				/*	0x80c~0x80f [4 bytes] */
+	u32 rfHSSIPara1;	/*  wire parameter control1 : */
+				/*	0x820~0x823,0x828~0x82b,
+				 *	0x830~0x833, 0x838~0x83b [16 bytes] */
+	u32 rfHSSIPara2;	/*  wire parameter control2 : */
+				/*	0x824~0x827,0x82c~0x82f, 0x834~0x837,
+				 *	0x83c~0x83f [16 bytes] */
+	u32 rfSwitchControl;	/* Tx Rx antenna control : */
+				/*	0x858~0x85f [16 bytes] */
+	u32 rfAGCControl1;	/* AGC parameter control1 : */
+				/*	0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+				 * 0xc68~0xc6b [16 bytes] */
+	u32 rfAGCControl2;	/* AGC parameter control2 : */
+				/*	0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+				 *	0xc6c~0xc6f [16 bytes] */
+	u32 rfRxIQImbalance;	/* OFDM Rx IQ imbalance matrix : */
+				/*	0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+				 *	0xc2c~0xc2f [16 bytes] */
+	u32 rfRxAFE;		/* Rx IQ DC ofset and Rx digital filter,
+				 * Rx DC notch filter : */
+				/*	0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+				 *	0xc28~0xc2b [16 bytes] */
+	u32 rfTxIQImbalance;	/* OFDM Tx IQ imbalance matrix */
+				/*	0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+				 *	 0xc98~0xc9b [16 bytes] */
+	u32 rfTxAFE;		/* Tx IQ DC Offset and Tx DFIR type */
+				/*	0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+				 *	0xc9c~0xc9f [16 bytes] */
+	u32 rfLSSIReadBack;	/* LSSI RF readback data SI mode */
+				/*	0x8a0~0x8af [16 bytes] */
+	u32 rfLSSIReadBackPi;	/* LSSI RF readback data PI mode 0x8b8-8bc for
+				 * Path A and B */
+};
+
+struct ant_sel_ofdm {
+	u32 r_tx_antenna:4;
+	u32 r_ant_l:4;
+	u32 r_ant_non_ht:4;
+	u32 r_ant_ht1:4;
+	u32 r_ant_ht2:4;
+	u32 r_ant_ht_s1:4;
+	u32 r_ant_non_ht_s1:4;
+	u32 OFDM_TXSC:2;
+	u32 reserved:2;
+};
+
+struct ant_sel_cck {
+	u8 r_cckrx_enable_2:2;
+	u8 r_cckrx_enable:2;
+	u8 r_ccktx_enable:4;
+};
+
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+/*  */
+/*  BB and RF register read/write */
+/*  */
+u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
+			   u32 mask, u32 data);
+u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+			    u32 regaddr, u32 mask);
+void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
+			   u32 regaddr, u32 mask, u32 data);
+
+/*  Initialization related function */
+/* MAC/BB/RF HAL config */
+int PHY_MACConfig8188E(struct adapter *adapter);
+int PHY_BBConfig8188E(struct adapter *adapter);
+int PHY_RFConfig8188E(struct adapter *adapter);
+
+/* RF config */
+int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
+				      enum rf_radio_path rfpath);
+int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
+					enum rf_radio_path rfpath);
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/*  BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
+bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/*  Switch bandwidth for 8192S */
+void PHY_SetBWMode8188E(struct adapter *adapter,
+			enum ht_channel_width chnlwidth, unsigned char offset);
+
+/*  channel switch related funciton */
+void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
+/*  Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/*  BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter,	bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
+				 u32 mask, u32 data);
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_QueryBBReg(adapt, regaddr, mask)			\
+	 rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
+#define PHY_SetBBReg(adapt, regaddr, bitmask, data)		\
+	 rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
+#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask)	\
+	rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
+#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data)	\
+	rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))
+
+#define PHY_SetMacReg	PHY_SetBBReg
+
+#define	SIC_HW_SUPPORT			0
+
+#define	SIC_MAX_POLL_CNT		5
+
+#define	SIC_CMD_READY			0
+#define	SIC_CMD_WRITE			1
+#define	SIC_CMD_READ			2
+
+#define	SIC_CMD_REG			0x1EB		/*  1byte */
+#define	SIC_ADDR_REG			0x1E8		/*  1b9~1ba, 2 bytes */
+#define	SIC_DATA_REG			0x1EC		/*  1bc~1bf */
+
+#endif	/*  __INC_HAL8192CPHYCFG_H */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
new file mode 100644
index 0000000..0e06d29
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPhyReg.h
@@ -0,0 +1,1094 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYREG_H__
+#define __INC_HAL8188EPHYREG_H__
+/*--------------------------Define Parameters-------------------------------*/
+/*  */
+/*  BB-PHY register PMAC 0x100 PHY 0x800 - 0xEFF */
+/*  1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/*  2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00 */
+/*  3. RF register 0x00-2E */
+/*  4. Bit Mask for BB/RF register */
+/*  5. Other defintion for BB/RF R/W */
+/*  */
+
+
+/*  */
+/*  1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF */
+/*  1. Page1(0x100) */
+/*  */
+#define	rPMAC_Reset		0x100
+#define	rPMAC_TxStart		0x104
+#define	rPMAC_TxLegacySIG	0x108
+#define	rPMAC_TxHTSIG1		0x10c
+#define	rPMAC_TxHTSIG2		0x110
+#define	rPMAC_PHYDebug		0x114
+#define	rPMAC_TxPacketNum	0x118
+#define	rPMAC_TxIdle		0x11c
+#define	rPMAC_TxMACHeader0	0x120
+#define	rPMAC_TxMACHeader1	0x124
+#define	rPMAC_TxMACHeader2	0x128
+#define	rPMAC_TxMACHeader3	0x12c
+#define	rPMAC_TxMACHeader4	0x130
+#define	rPMAC_TxMACHeader5	0x134
+#define	rPMAC_TxDataType	0x138
+#define	rPMAC_TxRandomSeed	0x13c
+#define	rPMAC_CCKPLCPPreamble	0x140
+#define	rPMAC_CCKPLCPHeader	0x144
+#define	rPMAC_CCKCRC16		0x148
+#define	rPMAC_OFDMRxCRC32OK	0x170
+#define	rPMAC_OFDMRxCRC32Er	0x174
+#define	rPMAC_OFDMRxParityEr	0x178
+#define	rPMAC_OFDMRxCRC8Er	0x17c
+#define	rPMAC_CCKCRxRC16Er	0x180
+#define	rPMAC_CCKCRxRC32Er	0x184
+#define	rPMAC_CCKCRxRC32OK	0x188
+#define	rPMAC_TxStatus		0x18c
+
+/*  2. Page2(0x200) */
+/*  The following two definition are only used for USB interface. */
+#define	RF_BB_CMD_ADDR		0x02c0	/*  RF/BB r/w cmd address. */
+#define	RF_BB_CMD_DATA		0x02c4	/*  RF/BB r/w cmd data. */
+
+/*  3. Page8(0x800) */
+#define	rFPGA0_RFMOD		0x800	/* RF mode & CCK TxSC RF BW Setting */
+
+#define	rFPGA0_TxInfo		0x804	/*  Status report?? */
+#define	rFPGA0_PSDFunction	0x808
+
+#define	rFPGA0_TxGainStage	0x80c	/*  Set TX PWR init gain? */
+
+#define	rFPGA0_RFTiming1	0x810	/*  Useless now */
+#define	rFPGA0_RFTiming2	0x814
+
+#define	rFPGA0_XA_HSSIParameter1	0x820	/*  RF 3 wire register */
+#define	rFPGA0_XA_HSSIParameter2	0x824
+#define	rFPGA0_XB_HSSIParameter1	0x828
+#define	rFPGA0_XB_HSSIParameter2	0x82c
+
+#define	rFPGA0_XA_LSSIParameter		0x840
+#define	rFPGA0_XB_LSSIParameter		0x844
+
+#define	rFPGA0_RFWakeUpParameter	0x850	/*  Useless now */
+#define	rFPGA0_RFSleepUpParameter	0x854
+
+#define	rFPGA0_XAB_SwitchControl	0x858	/*  RF Channel switch */
+#define	rFPGA0_XCD_SwitchControl	0x85c
+
+#define	rFPGA0_XA_RFInterfaceOE		0x860	/*  RF Channel switch */
+#define	rFPGA0_XB_RFInterfaceOE		0x864
+
+#define	rFPGA0_XAB_RFInterfaceSW	0x870	/*  RF Iface Software Control */
+#define	rFPGA0_XCD_RFInterfaceSW	0x874
+
+#define	rFPGA0_XAB_RFParameter		0x878	/*  RF Parameter */
+#define	rFPGA0_XCD_RFParameter		0x87c
+
+/* Crystal cap setting RF-R/W protection for parameter4?? */
+#define	rFPGA0_AnalogParameter1		0x880
+#define	rFPGA0_AnalogParameter2		0x884
+#define	rFPGA0_AnalogParameter3		0x888
+/*  enable ad/da clock1 for dual-phy */
+#define	rFPGA0_AdDaClockEn		0x888
+#define	rFPGA0_AnalogParameter4		0x88c
+
+#define	rFPGA0_XA_LSSIReadBack		0x8a0	/*  Tranceiver LSSI Readback */
+#define	rFPGA0_XB_LSSIReadBack		0x8a4
+#define	rFPGA0_XC_LSSIReadBack		0x8a8
+#define	rFPGA0_XD_LSSIReadBack		0x8ac
+
+#define	rFPGA0_PSDReport		0x8b4	/*  Useless now */
+/*  Transceiver A HSPI Readback */
+#define	TransceiverA_HSPI_Readback	0x8b8
+/*  Transceiver B HSPI Readback */
+#define	TransceiverB_HSPI_Readback	0x8bc
+/*  Useless now RF Interface Readback Value */
+#define	rFPGA0_XAB_RFInterfaceRB	0x8e0
+#define	rFPGA0_XCD_RFInterfaceRB	0x8e4	/*  Useless now */
+
+/*  4. Page9(0x900) */
+/* RF mode & OFDM TxSC RF BW Setting?? */
+#define	rFPGA1_RFMOD			0x900
+
+#define	rFPGA1_TxBlock			0x904	/*  Useless now */
+#define	rFPGA1_DebugSelect		0x908	/*  Useless now */
+#define	rFPGA1_TxInfo			0x90c	/*  Useless now Status report */
+
+/*  5. PageA(0xA00) */
+/*  Set Control channel to upper or lower - required only for 40MHz */
+#define	rCCK0_System			0xa00
+
+/*  Disable init gain now Select RX path by RSSI */
+#define	rCCK0_AFESetting		0xa04
+/*  Disable init gain now Init gain */
+#define	rCCK0_CCA			0xa08
+
+/* AGC default value, saturation level Antenna Diversity, RX AGC, LNA Threshold,
+ * RX LNA Threshold useless now. Not the same as 90 series */
+#define	rCCK0_RxAGC1			0xa0c
+#define	rCCK0_RxAGC2			0xa10	/* AGC & DAGC */
+
+#define	rCCK0_RxHP			0xa14
+
+/* Timing recovery & Channel estimation threshold */
+#define	rCCK0_DSPParameter1		0xa18
+#define	rCCK0_DSPParameter2		0xa1c	/* SQ threshold */
+
+#define	rCCK0_TxFilter1			0xa20
+#define	rCCK0_TxFilter2			0xa24
+#define	rCCK0_DebugPort			0xa28	/* debug port and Tx filter3 */
+#define	rCCK0_FalseAlarmReport		0xa2c	/* 0xa2d useless now */
+#define	rCCK0_TRSSIReport		0xa50
+#define	rCCK0_RxReport			0xa54  /* 0xa57 */
+#define	rCCK0_FACounterLower		0xa5c  /* 0xa5b */
+#define	rCCK0_FACounterUpper		0xa58  /* 0xa5c */
+
+/*  */
+/*  PageB(0xB00) */
+/*  */
+#define	rPdp_AntA			0xb00
+#define	rPdp_AntA_4			0xb04
+#define	rConfig_Pmpd_AntA		0xb28
+#define	rConfig_AntA			0xb68
+#define	rConfig_AntB			0xb6c
+#define	rPdp_AntB			0xb70
+#define	rPdp_AntB_4			0xb74
+#define	rConfig_Pmpd_AntB		0xb98
+#define	rAPK				0xbd8
+
+/*  */
+/*  6. PageC(0xC00) */
+/*  */
+#define	rOFDM0_LSTF			0xc00
+
+#define	rOFDM0_TRxPathEnable		0xc04
+#define	rOFDM0_TRMuxPar			0xc08
+#define	rOFDM0_TRSWIsolation		0xc0c
+
+/* RxIQ DC offset, Rx digital filter, DC notch filter */
+#define	rOFDM0_XARxAFE			0xc10
+#define	rOFDM0_XARxIQImbalance		0xc14  /* RxIQ imblance matrix */
+#define	rOFDM0_XBRxAFE			0xc18
+#define	rOFDM0_XBRxIQImbalance		0xc1c
+#define	rOFDM0_XCRxAFE			0xc20
+#define	rOFDM0_XCRxIQImbalance		0xc24
+#define	rOFDM0_XDRxAFE			0xc28
+#define	rOFDM0_XDRxIQImbalance		0xc2c
+
+#define	rOFDM0_RxDetector1		0xc30  /*PD,BW & SBD DM tune init gain*/
+#define	rOFDM0_RxDetector2		0xc34  /* SBD & Fame Sync. */
+#define	rOFDM0_RxDetector3		0xc38  /* Frame Sync. */
+#define	rOFDM0_RxDetector4		0xc3c  /* PD, SBD, Frame Sync & Short-GI */
+
+#define	rOFDM0_RxDSP			0xc40  /* Rx Sync Path */
+#define	rOFDM0_CFOandDAGC		0xc44  /* CFO & DAGC */
+#define	rOFDM0_CCADropThreshold		0xc48 /* CCA Drop threshold */
+#define	rOFDM0_ECCAThreshold		0xc4c /*  energy CCA */
+
+#define	rOFDM0_XAAGCCore1		0xc50	/*  DIG */
+#define	rOFDM0_XAAGCCore2		0xc54
+#define	rOFDM0_XBAGCCore1		0xc58
+#define	rOFDM0_XBAGCCore2		0xc5c
+#define	rOFDM0_XCAGCCore1		0xc60
+#define	rOFDM0_XCAGCCore2		0xc64
+#define	rOFDM0_XDAGCCore1		0xc68
+#define	rOFDM0_XDAGCCore2		0xc6c
+
+#define	rOFDM0_AGCParameter1		0xc70
+#define	rOFDM0_AGCParameter2		0xc74
+#define	rOFDM0_AGCRSSITable		0xc78
+#define	rOFDM0_HTSTFAGC			0xc7c
+
+#define	rOFDM0_XATxIQImbalance		0xc80	/*  TX PWR TRACK and DIG */
+#define	rOFDM0_XATxAFE			0xc84
+#define	rOFDM0_XBTxIQImbalance		0xc88
+#define	rOFDM0_XBTxAFE			0xc8c
+#define	rOFDM0_XCTxIQImbalance		0xc90
+#define	rOFDM0_XCTxAFE			0xc94
+#define	rOFDM0_XDTxIQImbalance		0xc98
+#define	rOFDM0_XDTxAFE			0xc9c
+
+#define	rOFDM0_RxIQExtAnta		0xca0
+#define	rOFDM0_TxCoeff1			0xca4
+#define	rOFDM0_TxCoeff2			0xca8
+#define	rOFDM0_TxCoeff3			0xcac
+#define	rOFDM0_TxCoeff4			0xcb0
+#define	rOFDM0_TxCoeff5			0xcb4
+#define	rOFDM0_TxCoeff6			0xcb8
+#define	rOFDM0_RxHPParameter		0xce0
+#define	rOFDM0_TxPseudoNoiseWgt		0xce4
+#define	rOFDM0_FrameSync		0xcf0
+#define	rOFDM0_DFSReport		0xcf4
+
+
+/*  */
+/*  7. PageD(0xD00) */
+/*  */
+#define	rOFDM1_LSTF			0xd00
+#define	rOFDM1_TRxPathEnable		0xd04
+
+#define	rOFDM1_CFO			0xd08	/*  No setting now */
+#define	rOFDM1_CSI1			0xd10
+#define	rOFDM1_SBD			0xd14
+#define	rOFDM1_CSI2			0xd18
+#define	rOFDM1_CFOTracking		0xd2c
+#define	rOFDM1_TRxMesaure1		0xd34
+#define	rOFDM1_IntfDet			0xd3c
+#define	rOFDM1_PseudoNoiseStateAB	0xd50
+#define	rOFDM1_PseudoNoiseStateCD	0xd54
+#define	rOFDM1_RxPseudoNoiseWgt		0xd58
+
+#define	rOFDM_PHYCounter1		0xda0  /* cca, parity fail */
+#define	rOFDM_PHYCounter2		0xda4  /* rate illegal, crc8 fail */
+#define	rOFDM_PHYCounter3		0xda8  /* MCS not support */
+
+#define	rOFDM_ShortCFOAB		0xdac	/*  No setting now */
+#define	rOFDM_ShortCFOCD		0xdb0
+#define	rOFDM_LongCFOAB			0xdb4
+#define	rOFDM_LongCFOCD			0xdb8
+#define	rOFDM_TailCFOAB			0xdbc
+#define	rOFDM_TailCFOCD			0xdc0
+#define	rOFDM_PWMeasure1		0xdc4
+#define	rOFDM_PWMeasure2		0xdc8
+#define	rOFDM_BWReport			0xdcc
+#define	rOFDM_AGCReport			0xdd0
+#define	rOFDM_RxSNR			0xdd4
+#define	rOFDM_RxEVMCSI			0xdd8
+#define	rOFDM_SIGReport			0xddc
+
+
+/*  */
+/*  8. PageE(0xE00) */
+/*  */
+#define	rTxAGC_A_Rate18_06		0xe00
+#define	rTxAGC_A_Rate54_24		0xe04
+#define	rTxAGC_A_CCK1_Mcs32		0xe08
+#define	rTxAGC_A_Mcs03_Mcs00		0xe10
+#define	rTxAGC_A_Mcs07_Mcs04		0xe14
+#define	rTxAGC_A_Mcs11_Mcs08		0xe18
+#define	rTxAGC_A_Mcs15_Mcs12		0xe1c
+
+#define	rTxAGC_B_Rate18_06		0x830
+#define	rTxAGC_B_Rate54_24		0x834
+#define	rTxAGC_B_CCK1_55_Mcs32		0x838
+#define	rTxAGC_B_Mcs03_Mcs00		0x83c
+#define	rTxAGC_B_Mcs07_Mcs04		0x848
+#define	rTxAGC_B_Mcs11_Mcs08		0x84c
+#define	rTxAGC_B_Mcs15_Mcs12		0x868
+#define	rTxAGC_B_CCK11_A_CCK2_11	0x86c
+
+#define	rFPGA0_IQK			0xe28
+#define	rTx_IQK_Tone_A			0xe30
+#define	rRx_IQK_Tone_A			0xe34
+#define	rTx_IQK_PI_A			0xe38
+#define	rRx_IQK_PI_A			0xe3c
+
+#define	rTx_IQK				0xe40
+#define	rRx_IQK				0xe44
+#define	rIQK_AGC_Pts			0xe48
+#define	rIQK_AGC_Rsp			0xe4c
+#define	rTx_IQK_Tone_B			0xe50
+#define	rRx_IQK_Tone_B			0xe54
+#define	rTx_IQK_PI_B			0xe58
+#define	rRx_IQK_PI_B			0xe5c
+#define	rIQK_AGC_Cont			0xe60
+
+#define	rBlue_Tooth			0xe6c
+#define	rRx_Wait_CCA			0xe70
+#define	rTx_CCK_RFON			0xe74
+#define	rTx_CCK_BBON			0xe78
+#define	rTx_OFDM_RFON			0xe7c
+#define	rTx_OFDM_BBON			0xe80
+#define	rTx_To_Rx			0xe84
+#define	rTx_To_Tx			0xe88
+#define	rRx_CCK				0xe8c
+
+#define	rTx_Power_Before_IQK_A		0xe94
+#define	rTx_Power_After_IQK_A		0xe9c
+
+#define	rRx_Power_Before_IQK_A		0xea0
+#define	rRx_Power_Before_IQK_A_2	0xea4
+#define	rRx_Power_After_IQK_A		0xea8
+#define	rRx_Power_After_IQK_A_2		0xeac
+
+#define	rTx_Power_Before_IQK_B		0xeb4
+#define	rTx_Power_After_IQK_B		0xebc
+
+#define	rRx_Power_Before_IQK_B		0xec0
+#define	rRx_Power_Before_IQK_B_2	0xec4
+#define	rRx_Power_After_IQK_B		0xec8
+#define	rRx_Power_After_IQK_B_2		0xecc
+
+#define	rRx_OFDM			0xed0
+#define	rRx_Wait_RIFS			0xed4
+#define	rRx_TO_Rx			0xed8
+#define	rStandby			0xedc
+#define	rSleep				0xee0
+#define	rPMPD_ANAEN			0xeec
+
+/*  */
+/*  7. RF Register 0x00-0x2E (RF 8256) */
+/*     RF-0222D 0x00-3F */
+/*  */
+/* Zebra1 */
+#define	rZebra1_HSSIEnable		0x0	/*  Useless now */
+#define	rZebra1_TRxEnable1		0x1
+#define	rZebra1_TRxEnable2		0x2
+#define	rZebra1_AGC			0x4
+#define	rZebra1_ChargePump		0x5
+#define	rZebra1_Channel			0x7	/*  RF channel switch */
+
+/* endif */
+#define	rZebra1_TxGain			0x8	/*  Useless now */
+#define	rZebra1_TxLPF			0x9
+#define	rZebra1_RxLPF			0xb
+#define	rZebra1_RxHPFCorner		0xc
+
+/* Zebra4 */
+#define	rGlobalCtrl		0	/*  Useless now */
+#define	rRTL8256_TxLPF		19
+#define	rRTL8256_RxLPF		11
+
+/* RTL8258 */
+#define	rRTL8258_TxLPF		0x11	/*  Useless now */
+#define	rRTL8258_RxLPF		0x13
+#define	rRTL8258_RSSILPF	0xa
+
+/*  */
+/*  RL6052 Register definition */
+/*  */
+#define	RF_AC			0x00	/*  */
+
+#define	RF_IQADJ_G1		0x01	/*  */
+#define	RF_IQADJ_G2		0x02	/*  */
+
+#define	RF_POW_TRSW		0x05	/*  */
+
+#define	RF_GAIN_RX		0x06	/*  */
+#define	RF_GAIN_TX		0x07	/*  */
+
+#define	RF_TXM_IDAC		0x08	/*  */
+#define	RF_IPA_G		0x09	/*  */
+#define	RF_TXBIAS_G		0x0A
+#define	RF_TXPA_AG		0x0B
+#define	RF_IPA_A		0x0C	/*  */
+#define	RF_TXBIAS_A		0x0D
+#define	RF_BS_PA_APSET_G9_G11	0x0E
+#define	RF_BS_IQGEN		0x0F	/*  */
+
+#define	RF_MODE1		0x10	/*  */
+#define	RF_MODE2		0x11	/*  */
+
+#define	RF_RX_AGC_HP		0x12	/*  */
+#define	RF_TX_AGC		0x13	/*  */
+#define	RF_BIAS			0x14	/*  */
+#define	RF_IPA			0x15	/*  */
+#define	RF_TXBIAS		0x16
+#define	RF_POW_ABILITY		0x17	/*  */
+#define	RF_CHNLBW		0x18	/*  RF channel and BW switch */
+#define	RF_TOP			0x19	/*  */
+
+#define	RF_RX_G1		0x1A	/*  */
+#define	RF_RX_G2		0x1B	/*  */
+
+#define	RF_RX_BB2		0x1C	/*  */
+#define	RF_RX_BB1		0x1D	/*  */
+
+#define	RF_RCK1			0x1E	/*  */
+#define	RF_RCK2			0x1F	/*  */
+
+#define	RF_TX_G1		0x20	/*  */
+#define	RF_TX_G2		0x21	/*  */
+#define	RF_TX_G3		0x22	/*  */
+
+#define	RF_TX_BB1		0x23	/*  */
+
+#define	RF_T_METER_92D		0x42	/*  */
+#define	RF_T_METER_88E		0x42	/*  */
+#define	RF_T_METER		0x24	/*  */
+
+#define	RF_SYN_G1		0x25	/*  RF TX Power control */
+#define	RF_SYN_G2		0x26	/*  RF TX Power control */
+#define	RF_SYN_G3		0x27	/*  RF TX Power control */
+#define	RF_SYN_G4		0x28	/*  RF TX Power control */
+#define	RF_SYN_G5		0x29	/*  RF TX Power control */
+#define	RF_SYN_G6		0x2A	/*  RF TX Power control */
+#define	RF_SYN_G7		0x2B	/*  RF TX Power control */
+#define	RF_SYN_G8		0x2C	/*  RF TX Power control */
+
+#define	RF_RCK_OS		0x30	/*  RF TX PA control */
+#define	RF_TXPA_G1		0x31	/*  RF TX PA control */
+#define	RF_TXPA_G2		0x32	/*  RF TX PA control */
+#define	RF_TXPA_G3		0x33	/*  RF TX PA control */
+#define	RF_TX_BIAS_A		0x35
+#define	RF_TX_BIAS_D		0x36
+#define	RF_LOBF_9		0x38
+#define	RF_RXRF_A3		0x3C	/*  */
+#define	RF_TRSW			0x3F
+
+#define	RF_TXRF_A2		0x41
+#define	RF_TXPA_G4		0x46
+#define	RF_TXPA_A4		0x4B
+#define	RF_0x52			0x52
+#define	RF_WE_LUT		0xEF
+
+
+/*  */
+/* Bit Mask */
+/*  */
+/*  1. Page1(0x100) */
+#define	bBBResetB		0x100	/*  Useless now? */
+#define	bGlobalResetB		0x200
+#define	bOFDMTxStart		0x4
+#define	bCCKTxStart		0x8
+#define	bCRC32Debug		0x100
+#define	bPMACLoopback		0x10
+#define	bTxLSIG			0xffffff
+#define	bOFDMTxRate		0xf
+#define	bOFDMTxReserved		0x10
+#define	bOFDMTxLength		0x1ffe0
+#define	bOFDMTxParity		0x20000
+#define	bTxHTSIG1		0xffffff
+#define	bTxHTMCSRate		0x7f
+#define	bTxHTBW			0x80
+#define	bTxHTLength		0xffff00
+#define	bTxHTSIG2		0xffffff
+#define	bTxHTSmoothing		0x1
+#define	bTxHTSounding		0x2
+#define	bTxHTReserved		0x4
+#define	bTxHTAggreation		0x8
+#define	bTxHTSTBC		0x30
+#define	bTxHTAdvanceCoding	0x40
+#define	bTxHTShortGI		0x80
+#define	bTxHTNumberHT_LTF	0x300
+#define	bTxHTCRC8		0x3fc00
+#define	bCounterReset		0x10000
+#define	bNumOfOFDMTx		0xffff
+#define	bNumOfCCKTx		0xffff0000
+#define	bTxIdleInterval		0xffff
+#define	bOFDMService		0xffff0000
+#define	bTxMACHeader		0xffffffff
+#define	bTxDataInit		0xff
+#define	bTxHTMode		0x100
+#define	bTxDataType		0x30000
+#define	bTxRandomSeed		0xffffffff
+#define	bCCKTxPreamble		0x1
+#define	bCCKTxSFD		0xffff0000
+#define	bCCKTxSIG		0xff
+#define	bCCKTxService		0xff00
+#define	bCCKLengthExt		0x8000
+#define	bCCKTxLength		0xffff0000
+#define	bCCKTxCRC16		0xffff
+#define	bCCKTxStatus		0x1
+#define	bOFDMTxStatus		0x2
+
+#define	IS_BB_REG_OFFSET_92S(_Offset)			\
+	((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+/*  2. Page8(0x800) */
+#define	bRFMOD			0x1	/*  Reg 0x800 rFPGA0_RFMOD */
+#define	bJapanMode		0x2
+#define	bCCKTxSC		0x30
+#define	bCCKEn			0x1000000
+#define	bOFDMEn			0x2000000
+
+#define	bOFDMRxADCPhase		0x10000	/*  Useless now */
+#define	bOFDMTxDACPhase		0x40000
+#define	bXATxAGC		0x3f
+
+#define	bAntennaSelect		0x0300
+
+#define	bXBTxAGC		0xf00	/*  Reg 80c rFPGA0_TxGainStage */
+#define	bXCTxAGC		0xf000
+#define	bXDTxAGC		0xf0000
+
+#define	bPAStart		0xf0000000	/*  Useless now */
+#define	bTRStart		0x00f00000
+#define	bRFStart		0x0000f000
+#define	bBBStart		0x000000f0
+#define	bBBCCKStart		0x0000000f
+#define	bPAEnd			0xf          /* Reg0x814 */
+#define	bTREnd			0x0f000000
+#define	bRFEnd			0x000f0000
+#define	bCCAMask		0x000000f0   /* T2R */
+#define	bR2RCCAMask		0x00000f00
+#define	bHSSI_R2TDelay		0xf8000000
+#define	bHSSI_T2RDelay		0xf80000
+#define	bContTxHSSI		0x400     /* change gain at continue Tx */
+#define	bIGFromCCK		0x200
+#define	bAGCAddress		0x3f
+#define	bRxHPTx			0x7000
+#define	bRxHPT2R		0x38000
+#define	bRxHPCCKIni		0xc0000
+#define	bAGCTxCode		0xc00000
+#define	bAGCRxCode		0x300000
+
+/* Reg 0x820~84f rFPGA0_XA_HSSIParameter1 */
+#define	b3WireDataLength	0x800
+#define	b3WireAddressLength	0x400
+
+#define	b3WireRFPowerDown	0x1	/*  Useless now */
+#define	b5GPAPEPolarity		0x40000000
+#define	b2GPAPEPolarity		0x80000000
+#define	bRFSW_TxDefaultAnt	0x3
+#define	bRFSW_TxOptionAnt	0x30
+#define	bRFSW_RxDefaultAnt	0x300
+#define	bRFSW_RxOptionAnt	0x3000
+#define	bRFSI_3WireData		0x1
+#define	bRFSI_3WireClock	0x2
+#define	bRFSI_3WireLoad		0x4
+#define	bRFSI_3WireRW		0x8
+#define	bRFSI_3Wire		0xf
+
+#define	bRFSI_RFENV		0x10	/* Reg 0x870 rFPGA0_XAB_RFInterfaceSW */
+
+#define	bRFSI_TRSW		0x20	/*  Useless now */
+#define	bRFSI_TRSWB		0x40
+#define	bRFSI_ANTSW		0x100
+#define	bRFSI_ANTSWB		0x200
+#define	bRFSI_PAPE		0x400
+#define	bRFSI_PAPE5G		0x800
+#define	bBandSelect		0x1
+#define	bHTSIG2_GI		0x80
+#define	bHTSIG2_Smoothing	0x01
+#define	bHTSIG2_Sounding	0x02
+#define	bHTSIG2_Aggreaton	0x08
+#define	bHTSIG2_STBC		0x30
+#define	bHTSIG2_AdvCoding	0x40
+#define	bHTSIG2_NumOfHTLTF	0x300
+#define	bHTSIG2_CRC8		0x3fc
+#define	bHTSIG1_MCS		0x7f
+#define	bHTSIG1_BandWidth	0x80
+#define	bHTSIG1_HTLength	0xffff
+#define	bLSIG_Rate		0xf
+#define	bLSIG_Reserved		0x10
+#define	bLSIG_Length		0x1fffe
+#define	bLSIG_Parity		0x20
+#define	bCCKRxPhase		0x4
+
+#define	bLSSIReadAddress	0x7f800000   /*  T65 RF */
+
+#define	bLSSIReadEdge		0x80000000   /* LSSI "Read" edge signal */
+
+#define	bLSSIReadBackData	0xfffff		/*  T65 RF */
+
+#define	bLSSIReadOKFlag		0x1000	/*  Useless now */
+#define	bCCKSampleRate		0x8       /* 0: 44MHz, 1:88MHz */
+#define	bRegulator0Standby	0x1
+#define	bRegulatorPLLStandby	0x2
+#define	bRegulator1Standby	0x4
+#define	bPLLPowerUp		0x8
+#define	bDPLLPowerUp		0x10
+#define	bDA10PowerUp		0x20
+#define	bAD7PowerUp		0x200
+#define	bDA6PowerUp		0x2000
+#define	bXtalPowerUp		0x4000
+#define	b40MDClkPowerUP		0x8000
+#define	bDA6DebugMode		0x20000
+#define	bDA6Swing		0x380000
+
+/*  Reg 0x880 rFPGA0_AnalogParameter1 20/40 CCK support switch 40/80 BB MHZ */
+#define	bADClkPhase		0x4000000
+
+#define	b80MClkDelay		0x18000000	/*  Useless */
+#define	bAFEWatchDogEnable	0x20000000
+
+/*  Reg 0x884 rFPGA0_AnalogParameter2 Crystal cap */
+#define	bXtalCap01		0xc0000000
+#define	bXtalCap23		0x3
+#define	bXtalCap92x		0x0f000000
+#define	bXtalCap		0x0f000000
+
+#define	bIntDifClkEnable	0x400	/*  Useless */
+#define	bExtSigClkEnable	0x800
+#define	bBandgapMbiasPowerUp	0x10000
+#define	bAD11SHGain		0xc0000
+#define	bAD11InputRange		0x700000
+#define	bAD11OPCurrent		0x3800000
+#define	bIPathLoopback		0x4000000
+#define	bQPathLoopback		0x8000000
+#define	bAFELoopback		0x10000000
+#define	bDA10Swing		0x7e0
+#define	bDA10Reverse		0x800
+#define	bDAClkSource		0x1000
+#define	bAD7InputRange		0x6000
+#define	bAD7Gain		0x38000
+#define	bAD7OutputCMMode	0x40000
+#define	bAD7InputCMMode		0x380000
+#define	bAD7Current		0xc00000
+#define	bRegulatorAdjust	0x7000000
+#define	bAD11PowerUpAtTx	0x1
+#define	bDA10PSAtTx		0x10
+#define	bAD11PowerUpAtRx	0x100
+#define	bDA10PSAtRx		0x1000
+#define	bCCKRxAGCFormat		0x200
+#define	bPSDFFTSamplepPoint	0xc000
+#define	bPSDAverageNum		0x3000
+#define	bIQPathControl		0xc00
+#define	bPSDFreq		0x3ff
+#define	bPSDAntennaPath		0x30
+#define	bPSDIQSwitch		0x40
+#define	bPSDRxTrigger		0x400000
+#define	bPSDTxTrigger		0x80000000
+#define	bPSDSineToneScale	0x7f000000
+#define	bPSDReport		0xffff
+
+/*  3. Page9(0x900) */
+#define	bOFDMTxSC		0x30000000	/*  Useless */
+#define	bCCKTxOn		0x1
+#define	bOFDMTxOn		0x2
+#define	bDebugPage		0xfff  /* reset debug page and HWord, LWord */
+#define	bDebugItem		0xff   /* reset debug page and LWord */
+#define	bAntL			0x10
+#define	bAntNonHT		0x100
+#define	bAntHT1			0x1000
+#define	bAntHT2			0x10000
+#define	bAntHT1S1		0x100000
+#define	bAntNonHTS1		0x1000000
+
+/*  4. PageA(0xA00) */
+#define	bCCKBBMode		0x3	/*  Useless */
+#define	bCCKTxPowerSaving	0x80
+#define	bCCKRxPowerSaving	0x40
+
+#define	bCCKSideBand		0x10	/*  Reg 0xa00 rCCK0_System 20/40 */
+
+#define	bCCKScramble		0x8	/*  Useless */
+#define	bCCKAntDiversity	0x8000
+#define	bCCKCarrierRecovery	0x4000
+#define	bCCKTxRate		0x3000
+#define	bCCKDCCancel		0x0800
+#define	bCCKISICancel		0x0400
+#define	bCCKMatchFilter		0x0200
+#define	bCCKEqualizer		0x0100
+#define	bCCKPreambleDetect	0x800000
+#define	bCCKFastFalseCCA	0x400000
+#define	bCCKChEstStart		0x300000
+#define	bCCKCCACount		0x080000
+#define	bCCKcs_lim		0x070000
+#define	bCCKBistMode		0x80000000
+#define	bCCKCCAMask		0x40000000
+#define	bCCKTxDACPhase		0x4
+#define	bCCKRxADCPhase		0x20000000   /* r_rx_clk */
+#define	bCCKr_cp_mode0		0x0100
+#define	bCCKTxDCOffset		0xf0
+#define	bCCKRxDCOffset		0xf
+#define	bCCKCCAMode		0xc000
+#define	bCCKFalseCS_lim		0x3f00
+#define	bCCKCS_ratio		0xc00000
+#define	bCCKCorgBit_sel		0x300000
+#define	bCCKPD_lim		0x0f0000
+#define	bCCKNewCCA		0x80000000
+#define	bCCKRxHPofIG		0x8000
+#define	bCCKRxIG		0x7f00
+#define	bCCKLNAPolarity		0x800000
+#define	bCCKRx1stGain		0x7f0000
+#define	bCCKRFExtend		0x20000000 /* CCK Rx Iinital gain polarity */
+#define	bCCKRxAGCSatLevel	0x1f000000
+#define	bCCKRxAGCSatCount	0xe0
+#define	bCCKRxRFSettle		0x1f       /* AGCsamp_dly */
+#define	bCCKFixedRxAGC		0x8000
+#define	bCCKAntennaPolarity	0x2000
+#define	bCCKTxFilterType	0x0c00
+#define	bCCKRxAGCReportType	0x0300
+#define	bCCKRxDAGCEn		0x80000000
+#define	bCCKRxDAGCPeriod	0x20000000
+#define	bCCKRxDAGCSatLevel	0x1f000000
+#define	bCCKTimingRecovery	0x800000
+#define	bCCKTxC0		0x3f0000
+#define	bCCKTxC1		0x3f000000
+#define	bCCKTxC2		0x3f
+#define	bCCKTxC3		0x3f00
+#define	bCCKTxC4		0x3f0000
+#define	bCCKTxC5		0x3f000000
+#define	bCCKTxC6		0x3f
+#define	bCCKTxC7		0x3f00
+#define	bCCKDebugPort		0xff0000
+#define	bCCKDACDebug		0x0f000000
+#define	bCCKFalseAlarmEnable	0x8000
+#define	bCCKFalseAlarmRead	0x4000
+#define	bCCKTRSSI		0x7f
+#define	bCCKRxAGCReport		0xfe
+#define	bCCKRxReport_AntSel	0x80000000
+#define	bCCKRxReport_MFOff	0x40000000
+#define	bCCKRxRxReport_SQLoss	0x20000000
+#define	bCCKRxReport_Pktloss	0x10000000
+#define	bCCKRxReport_Lockedbit	0x08000000
+#define	bCCKRxReport_RateError	0x04000000
+#define	bCCKRxReport_RxRate	0x03000000
+#define	bCCKRxFACounterLower	0xff
+#define	bCCKRxFACounterUpper	0xff000000
+#define	bCCKRxHPAGCStart	0xe000
+#define	bCCKRxHPAGCFinal	0x1c00
+#define	bCCKRxFalseAlarmEnable	0x8000
+#define	bCCKFACounterFreeze	0x4000
+#define	bCCKTxPathSel		0x10000000
+#define	bCCKDefaultRxPath	0xc000000
+#define	bCCKOptionRxPath	0x3000000
+
+/*  5. PageC(0xC00) */
+#define	bNumOfSTF		0x3	/*  Useless */
+#define	bShift_L		0xc0
+#define	bGI_TH			0xc
+#define	bRxPathA		0x1
+#define	bRxPathB		0x2
+#define	bRxPathC		0x4
+#define	bRxPathD		0x8
+#define	bTxPathA		0x1
+#define	bTxPathB		0x2
+#define	bTxPathC		0x4
+#define	bTxPathD		0x8
+#define	bTRSSIFreq		0x200
+#define	bADCBackoff		0x3000
+#define	bDFIRBackoff		0xc000
+#define	bTRSSILatchPhase	0x10000
+#define	bRxIDCOffset		0xff
+#define	bRxQDCOffset		0xff00
+#define	bRxDFIRMode		0x1800000
+#define	bRxDCNFType		0xe000000
+#define	bRXIQImb_A		0x3ff
+#define	bRXIQImb_B		0xfc00
+#define	bRXIQImb_C		0x3f0000
+#define	bRXIQImb_D		0xffc00000
+#define	bDC_dc_Notch		0x60000
+#define	bRxNBINotch		0x1f000000
+#define	bPD_TH			0xf
+#define	bPD_TH_Opt2		0xc000
+#define	bPWED_TH		0x700
+#define	bIfMF_Win_L		0x800
+#define	bPD_Option		0x1000
+#define	bMF_Win_L		0xe000
+#define	bBW_Search_L		0x30000
+#define	bwin_enh_L		0xc0000
+#define	bBW_TH			0x700000
+#define	bED_TH2			0x3800000
+#define	bBW_option		0x4000000
+#define	bRatio_TH		0x18000000
+#define	bWindow_L		0xe0000000
+#define	bSBD_Option		0x1
+#define	bFrame_TH		0x1c
+#define	bFS_Option		0x60
+#define	bDC_Slope_check		0x80
+#define	bFGuard_Counter_DC_L	0xe00
+#define	bFrame_Weight_Short	0x7000
+#define	bSub_Tune		0xe00000
+#define	bFrame_DC_Length	0xe000000
+#define	bSBD_start_offset	0x30000000
+#define	bFrame_TH_2		0x7
+#define	bFrame_GI2_TH		0x38
+#define	bGI2_Sync_en		0x40
+#define	bSarch_Short_Early	0x300
+#define	bSarch_Short_Late	0xc00
+#define	bSarch_GI2_Late		0x70000
+#define	bCFOAntSum		0x1
+#define	bCFOAcc			0x2
+#define	bCFOStartOffset		0xc
+#define	bCFOLookBack		0x70
+#define	bCFOSumWeight		0x80
+#define	bDAGCEnable		0x10000
+#define	bTXIQImb_A		0x3ff
+#define	bTXIQImb_B		0xfc00
+#define	bTXIQImb_C		0x3f0000
+#define	bTXIQImb_D		0xffc00000
+#define	bTxIDCOffset		0xff
+#define	bTxQDCOffset		0xff00
+#define	bTxDFIRMode		0x10000
+#define	bTxPesudoNoiseOn	0x4000000
+#define	bTxPesudoNoise_A	0xff
+#define	bTxPesudoNoise_B	0xff00
+#define	bTxPesudoNoise_C	0xff0000
+#define	bTxPesudoNoise_D	0xff000000
+#define	bCCADropOption		0x20000
+#define	bCCADropThres		0xfff00000
+#define	bEDCCA_H		0xf
+#define	bEDCCA_L		0xf0
+#define	bLambda_ED		0x300
+#define	bRxInitialGain		0x7f
+#define	bRxAntDivEn		0x80
+#define	bRxAGCAddressForLNA	0x7f00
+#define	bRxHighPowerFlow	0x8000
+#define	bRxAGCFreezeThres	0xc0000
+#define	bRxFreezeStep_AGC1	0x300000
+#define	bRxFreezeStep_AGC2	0xc00000
+#define	bRxFreezeStep_AGC3	0x3000000
+#define	bRxFreezeStep_AGC0	0xc000000
+#define	bRxRssi_Cmp_En		0x10000000
+#define	bRxQuickAGCEn		0x20000000
+#define	bRxAGCFreezeThresMode	0x40000000
+#define	bRxOverFlowCheckType	0x80000000
+#define	bRxAGCShift		0x7f
+#define	bTRSW_Tri_Only		0x80
+#define	bPowerThres		0x300
+#define	bRxAGCEn		0x1
+#define	bRxAGCTogetherEn	0x2
+#define	bRxAGCMin		0x4
+#define	bRxHP_Ini		0x7
+#define	bRxHP_TRLNA		0x70
+#define	bRxHP_RSSI		0x700
+#define	bRxHP_BBP1		0x7000
+#define	bRxHP_BBP2		0x70000
+#define	bRxHP_BBP3		0x700000
+#define	bRSSI_H			0x7f0000     /* threshold for high power */
+#define	bRSSI_Gen		0x7f000000   /* threshold for ant diversity */
+#define	bRxSettle_TRSW		0x7
+#define	bRxSettle_LNA		0x38
+#define	bRxSettle_RSSI		0x1c0
+#define	bRxSettle_BBP		0xe00
+#define	bRxSettle_RxHP		0x7000
+#define	bRxSettle_AntSW_RSSI	0x38000
+#define	bRxSettle_AntSW		0xc0000
+#define	bRxProcessTime_DAGC	0x300000
+#define	bRxSettle_HSSI		0x400000
+#define	bRxProcessTime_BBPPW	0x800000
+#define	bRxAntennaPowerShift	0x3000000
+#define	bRSSITableSelect	0xc000000
+#define	bRxHP_Final		0x7000000
+#define	bRxHTSettle_BBP		0x7
+#define	bRxHTSettle_HSSI	0x8
+#define	bRxHTSettle_RxHP	0x70
+#define	bRxHTSettle_BBPPW	0x80
+#define	bRxHTSettle_Idle	0x300
+#define	bRxHTSettle_Reserved	0x1c00
+#define	bRxHTRxHPEn		0x8000
+#define	bRxHTAGCFreezeThres	0x30000
+#define	bRxHTAGCTogetherEn	0x40000
+#define	bRxHTAGCMin		0x80000
+#define	bRxHTAGCEn		0x100000
+#define	bRxHTDAGCEn		0x200000
+#define	bRxHTRxHP_BBP		0x1c00000
+#define	bRxHTRxHP_Final		0xe0000000
+#define	bRxPWRatioTH		0x3
+#define	bRxPWRatioEn		0x4
+#define	bRxMFHold		0x3800
+#define	bRxPD_Delay_TH1		0x38
+#define	bRxPD_Delay_TH2		0x1c0
+#define	bRxPD_DC_COUNT_MAX	0x600
+#define	bRxPD_Delay_TH		0x8000
+#define	bRxProcess_Delay	0xf0000
+#define	bRxSearchrange_GI2_Early	0x700000
+#define	bRxFrame_Guard_Counter_L	0x3800000
+#define	bRxSGI_Guard_L		0xc000000
+#define	bRxSGI_Search_L		0x30000000
+#define	bRxSGI_TH		0xc0000000
+#define	bDFSCnt0		0xff
+#define	bDFSCnt1		0xff00
+#define	bDFSFlag		0xf0000
+#define	bMFWeightSum		0x300000
+#define	bMinIdxTH		0x7f000000
+#define	bDAFormat		0x40000
+#define	bTxChEmuEnable		0x01000000
+#define	bTRSWIsolation_A	0x7f
+#define	bTRSWIsolation_B	0x7f00
+#define	bTRSWIsolation_C	0x7f0000
+#define	bTRSWIsolation_D	0x7f000000
+#define	bExtLNAGain		0x7c00
+
+/*  6. PageE(0xE00) */
+#define	bSTBCEn			0x4	/*  Useless */
+#define	bAntennaMapping		0x10
+#define	bNss			0x20
+#define	bCFOAntSumD		0x200
+#define	bPHYCounterReset	0x8000000
+#define	bCFOReportGet		0x4000000
+#define	bOFDMContinueTx		0x10000000
+#define	bOFDMSingleCarrier	0x20000000
+#define	bOFDMSingleTone		0x40000000
+#define	bHTDetect		0x100
+#define	bCFOEn			0x10000
+#define	bCFOValue		0xfff00000
+#define	bSigTone_Re		0x3f
+#define	bSigTone_Im		0x7f00
+#define	bCounter_CCA		0xffff
+#define	bCounter_ParityFail	0xffff0000
+#define	bCounter_RateIllegal	0xffff
+#define	bCounter_CRC8Fail	0xffff0000
+#define	bCounter_MCSNoSupport	0xffff
+#define	bCounter_FastSync	0xffff
+#define	bShortCFO		0xfff
+#define	bShortCFOTLength	12   /* total */
+#define	bShortCFOFLength	11   /* fraction */
+#define	bLongCFO		0x7ff
+#define	bLongCFOTLength		11
+#define	bLongCFOFLength		11
+#define	bTailCFO		0x1fff
+#define	bTailCFOTLength		13
+#define	bTailCFOFLength		12
+#define	bmax_en_pwdB		0xffff
+#define	bCC_power_dB		0xffff0000
+#define	bnoise_pwdB		0xffff
+#define	bPowerMeasTLength	10
+#define	bPowerMeasFLength	3
+#define	bRx_HT_BW		0x1
+#define	bRxSC			0x6
+#define	bRx_HT			0x8
+#define	bNB_intf_det_on		0x1
+#define	bIntf_win_len_cfg	0x30
+#define	bNB_Intf_TH_cfg		0x1c0
+#define	bRFGain			0x3f
+#define	bTableSel		0x40
+#define	bTRSW			0x80
+#define	bRxSNR_A		0xff
+#define	bRxSNR_B		0xff00
+#define	bRxSNR_C		0xff0000
+#define	bRxSNR_D		0xff000000
+#define	bSNREVMTLength		8
+#define	bSNREVMFLength		1
+#define	bCSI1st			0xff
+#define	bCSI2nd			0xff00
+#define	bRxEVM1st		0xff0000
+#define	bRxEVM2nd		0xff000000
+#define	bSIGEVM			0xff
+#define	bPWDB			0xff00
+#define	bSGIEN			0x10000
+
+#define	bSFactorQAM1		0xf	/*  Useless */
+#define	bSFactorQAM2		0xf0
+#define	bSFactorQAM3		0xf00
+#define	bSFactorQAM4		0xf000
+#define	bSFactorQAM5		0xf0000
+#define	bSFactorQAM6		0xf0000
+#define	bSFactorQAM7		0xf00000
+#define	bSFactorQAM8		0xf000000
+#define	bSFactorQAM9		0xf0000000
+#define	bCSIScheme		0x100000
+
+#define	bNoiseLvlTopSet		0x3	/*  Useless */
+#define	bChSmooth		0x4
+#define	bChSmoothCfg1		0x38
+#define	bChSmoothCfg2		0x1c0
+#define	bChSmoothCfg3		0xe00
+#define	bChSmoothCfg4		0x7000
+#define	bMRCMode		0x800000
+#define	bTHEVMCfg		0x7000000
+
+#define	bLoopFitType		0x1	/*  Useless */
+#define	bUpdCFO			0x40
+#define	bUpdCFOOffData		0x80
+#define	bAdvUpdCFO		0x100
+#define	bAdvTimeCtrl		0x800
+#define	bUpdClko		0x1000
+#define	bFC			0x6000
+#define	bTrackingMode		0x8000
+#define	bPhCmpEnable		0x10000
+#define	bUpdClkoLTF		0x20000
+#define	bComChCFO		0x40000
+#define	bCSIEstiMode		0x80000
+#define	bAdvUpdEqz		0x100000
+#define	bUChCfg			0x7000000
+#define	bUpdEqz			0x8000000
+
+/* Rx Pseduo noise */
+#define	bRxPesudoNoiseOn	0x20000000	/*  Useless */
+#define	bRxPesudoNoise_A	0xff
+#define	bRxPesudoNoise_B	0xff00
+#define	bRxPesudoNoise_C	0xff0000
+#define	bRxPesudoNoise_D	0xff000000
+#define	bPesudoNoiseState_A	0xffff
+#define	bPesudoNoiseState_B	0xffff0000
+#define	bPesudoNoiseState_C	0xffff
+#define	bPesudoNoiseState_D	0xffff0000
+
+/* 7. RF Register */
+/* Zebra1 */
+#define	bZebra1_HSSIEnable	0x8		/*  Useless */
+#define	bZebra1_TRxControl	0xc00
+#define	bZebra1_TRxGainSetting	0x07f
+#define	bZebra1_RxCorner	0xc00
+#define	bZebra1_TxChargePump	0x38
+#define	bZebra1_RxChargePump	0x7
+#define	bZebra1_ChannelNum	0xf80
+#define	bZebra1_TxLPFBW		0x400
+#define	bZebra1_RxLPFBW		0x600
+
+/* Zebra4 */
+#define	bRTL8256RegModeCtrl1	0x100	/*  Useless */
+#define	bRTL8256RegModeCtrl0	0x40
+#define	bRTL8256_TxLPFBW	0x18
+#define	bRTL8256_RxLPFBW	0x600
+
+/* RTL8258 */
+#define	bRTL8258_TxLPFBW	0xc	/*  Useless */
+#define	bRTL8258_RxLPFBW	0xc00
+#define	bRTL8258_RSSILPFBW	0xc0
+
+
+/*  */
+/*  Other Definition */
+/*  */
+
+/* byte endable for sb_write */
+#define	bByte0			0x1	/*  Useless */
+#define	bByte1			0x2
+#define	bByte2			0x4
+#define	bByte3			0x8
+#define	bWord0			0x3
+#define	bWord1			0xc
+#define	bDWord			0xf
+
+/* for PutRegsetting & GetRegSetting BitMask */
+#define	bMaskByte0		0xff	/*  Reg 0xc50 rOFDM0_XAAGCCore~0xC6f */
+#define	bMaskByte1		0xff00
+#define	bMaskByte2		0xff0000
+#define	bMaskByte3		0xff000000
+#define	bMaskHWord		0xffff0000
+#define	bMaskLWord		0x0000ffff
+#define	bMaskDWord		0xffffffff
+#define	bMask12Bits		0xfff
+#define	bMaskH4Bits		0xf0000000
+#define	bMaskOFDM_D		0xffc00000
+#define	bMaskCCK		0x3f3f3f3f
+
+/* for PutRFRegsetting & GetRFRegSetting BitMask */
+#define	bRFRegOffsetMask	0xfffff
+
+#define	bEnable                 0x1	/*  Useless */
+#define	bDisable                0x0
+
+#define	LeftAntenna		0x0	/*  Useless */
+#define	RightAntenna		0x1
+
+#define	tCheckTxStatus		500   /* 500ms Useless */
+#define	tUpdateRxCounter	100   /* 100ms */
+
+#define	rateCCK			0	/*  Useless */
+#define	rateOFDM		1
+#define	rateHT			2
+
+/* define Register-End */
+#define	bPMAC_End		0x1ff	/*  Useless */
+#define	bFPGAPHY0_End		0x8ff
+#define	bFPGAPHY1_End		0x9ff
+#define	bCCKPHY0_End		0xaff
+#define	bOFDMPHY0_End		0xcff
+#define	bOFDMPHY1_End		0xdff
+
+#define	bPMACControl		0x0	/*  Useless */
+#define	bWMACControl		0x1
+#define	bWNICControl		0x2
+
+#define	PathA			0x0	/*  Useless */
+#define	PathB			0x1
+#define	PathC			0x2
+#define	PathD			0x3
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
new file mode 100644
index 0000000..20d0b3e
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EPwrSeq.h
@@ -0,0 +1,176 @@
+
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL8188EPWRSEQ_H__
+#define __HAL8188EPWRSEQ_H__
+
+#include "HalPwrSeqCmd.h"
+
+/*
+	Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+	There are 6 HW Power States:
+	0: POFF--Power Off
+	1: PDN--Power Down
+	2: CARDEMU--Card Emulation
+	3: ACT--Active Mode
+	4: LPS--Low Power State
+	5: SUS--Suspend
+
+	The transision from different states are defined below
+	TRANS_CARDEMU_TO_ACT
+	TRANS_ACT_TO_CARDEMU
+	TRANS_CARDEMU_TO_SUS
+	TRANS_SUS_TO_CARDEMU
+	TRANS_CARDEMU_TO_PDN
+	TRANS_ACT_TO_LPS
+	TRANS_LPS_TO_ACT
+
+	TRANS_END
+
+    PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+*/
+#define	RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS	10
+#define	RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS	10
+#define	RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS	10
+#define	RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS	10
+#define	RTL8188E_TRANS_ACT_TO_LPS_STEPS		15
+#define	RTL8188E_TRANS_LPS_TO_ACT_STEPS		15
+#define	RTL8188E_TRANS_END_STEPS		1
+
+
+#define RTL8188E_TRANS_CARDEMU_TO_ACT														\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/								\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, BIT1},/* wait till 0x04[17] = 1    power ready*/	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0|BIT1, 0}, /* 0x02[1:0] = 0	reset BB*/			\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0}, /* 0x04[15] = 0 disable HWPDN (control by DRV)*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4|BIT3, 0}, /*0x04[12:11] = 2b'00 disable WL suspend*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, BIT0}, /*0x04[8] = 1 polling until return 0*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT0, 0}, /*wait till 0x04[8] = 0*/	\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*LDO normal mode*/	\
+	{0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*SDIO Driving*/	\
+
+#define RTL8188E_TRANS_ACT_TO_CARDEMU													\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/								\
+	{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/	\
+	{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*LDO Sleep mode*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*0x04[9] = 1 turn off MAC by HW state machine*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT1, 0}, /*wait till 0x04[9] = 0 polling until return 0 to disable*/	\
+
+#define RTL8188E_TRANS_CARDEMU_TO_SUS													\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/				\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01enable WL suspend*/	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3|BIT4}, /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/	\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT7}, /*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */	\
+	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */	\
+	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register  0xfe10[4]=1 */	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_SUS_TO_CARDEMU													\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/							\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS													\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },  comments here*/							\
+	{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7}, /*0x24[23] = 2b'01 schmit trigger */	\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, BIT3}, /*0x04[12:11] = 2b'01 enable WL suspend*/	\
+	{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*  0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */	\
+	{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*Clear SIC_EN register 0x40[12] = 1'b0 */	\
+	{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, BIT4}, /*Set USB suspend enable local register  0xfe10[4]=1 */	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, BIT0}, /*Set SDIO suspend local register*/	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, 0}, /*wait power state to suspend*/
+
+#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU													\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/								\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT0, 0}, /*Set SDIO suspend local register*/	\
+	{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT1, BIT1}, /*wait power state to suspend*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT3|BIT4, 0}, /*0x04[12:11] = 2b'01enable WL suspend*/
+
+#define RTL8188E_TRANS_CARDEMU_TO_PDN												\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/							\
+	{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/* 0x04[16] = 0*/\
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, BIT7},/* 0x04[15] = 1*/
+
+#define RTL8188E_TRANS_PDN_TO_CARDEMU												\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },  comments here					 */ \
+	{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT7, 0},/* 0x04[15] = 0*/
+
+/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */
+#define RTL8188E_TRANS_ACT_TO_LPS														\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here				*/   \
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/	\
+	{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/	\
+	{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/	\
+	{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/	\
+	{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0},/*Should be zero if no packet is transmitting*/	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT0, 0},/*CCK and OFDM are disabled,and clock are gated*/	\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/	\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/	\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, 0},/*check if removed later*/	\
+	{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT5, BIT5},/*Respond TxOK to scheduler*/	\
+
+
+#define RTL8188E_TRANS_LPS_TO_ACT															\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here				 */ \
+	{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/\
+	{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/\
+	{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/\
+	{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT4, 0}, /*.	0x08[4] = 0		 switch TSF to 40M*/\
+	{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT7, 0}, /*Polling 0x109[7]=0  TSF in 40M*/\
+	{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT6|BIT7, 0}, /*.	0x29[7:6] = 2b'00	 enable BB clock*/\
+	{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1, BIT1}, /*.	0x101[1] = 1*/\
+	{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, /*.	0x100[7:0] = 0xFF	 enable WMAC TRX*/\
+	{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT1|BIT0, BIT1|BIT0}, /*.	0x02[1:0] = 2b'11	 enable BB macro*/\
+	{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*.	0x522 = 0*/
+
+#define RTL8188E_TRANS_END															\
+	/* format */																\
+	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },  comments here*/					\
+	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /*  */
+
+
+extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_card_enable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
+
+#endif /* __HAL8188EPWRSEQ_H__ */
diff --git a/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
new file mode 100644
index 0000000..21996a1
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188ERateAdaptive.h
@@ -0,0 +1,75 @@
+#ifndef __INC_RA_H
+#define __INC_RA_H
+/*++
+Copyright (c) Realtek Semiconductor Corp. All rights reserved.
+
+Module Name:
+	RateAdaptive.h
+
+Abstract:
+	Prototype of RA and related data structure.
+
+Major Change History:
+	When       Who               What
+	---------- ---------------   -------------------------------
+	2011-08-12 Page            Create.
+--*/
+
+/*  Rate adaptive define */
+#define	PERENTRY	23
+#define	RETRYSIZE	5
+#define	RATESIZE	28
+#define	TX_RPT2_ITEM_SIZE	8
+
+/*  */
+/*  TX report 2 format in Rx desc */
+/*  */
+#define GET_TX_RPT2_DESC_PKT_LEN_88E(__pRxStatusDesc)		\
+	LE_BITS_TO_4BYTE(__pRxStatusDesc, 0, 9)
+#define GET_TX_RPT2_DESC_MACID_VALID_1_88E(__pRxStatusDesc)	\
+	LE_BITS_TO_4BYTE(__pRxStatusDesc+16, 0, 32)
+#define GET_TX_RPT2_DESC_MACID_VALID_2_88E(__pRxStatusDesc)	\
+	LE_BITS_TO_4BYTE(__pRxStatusDesc+20, 0, 32)
+
+#define GET_TX_REPORT_TYPE1_RERTY_0(__pAddr)			\
+	LE_BITS_TO_4BYTE(__pAddr, 0, 16)
+#define GET_TX_REPORT_TYPE1_RERTY_1(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_2(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+3, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_3(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+4, 0, 8)
+#define GET_TX_REPORT_TYPE1_RERTY_4(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+4+1, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_0(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+4+2, 0, 8)
+#define GET_TX_REPORT_TYPE1_DROP_1(__pAddr)			\
+	LE_BITS_TO_1BYTE(__pAddr+4+3, 0, 8)
+
+/*  End rate adaptive define */
+
+void ODM_RASupport_Init(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init_all(struct odm_dm_struct *dm_odm);
+
+int ODM_RAInfo_Init(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetShortGI_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetDecisionRate_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+
+u8 ODM_RA_GetHwPwrStatus_8188E(struct odm_dm_struct *dm_odm, u8 MacID);
+void ODM_RA_UpdateRateInfo_8188E(struct odm_dm_struct *dm_odm, u8 MacID,
+				 u8 RateID, u32 RateMask,
+				 u8 SGIEnable);
+
+void ODM_RA_SetRSSI_8188E(struct odm_dm_struct *dm_odm, u8 macid,
+			  u8 rssi);
+
+void ODM_RA_TxRPT2Handle_8188E(struct odm_dm_struct *dm_odm,
+			       u8 *txrpt_buf, u16 txrpt_len,
+			       u32 validentry0, u32 validentry1);
+
+void ODM_RA_Set_TxRPT_Time(struct odm_dm_struct *dm_odm, u16 minRptTime);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/Hal8188EReg.h b/drivers/staging/rtl8188eu/include/Hal8188EReg.h
new file mode 100644
index 0000000..d880b0c
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/Hal8188EReg.h
@@ -0,0 +1,46 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+/*  */
+/*  File Name: Hal8188EReg.h */
+/*  */
+/*  Description: */
+/*  */
+/*  This file is for RTL8188E register definition. */
+/*  */
+/*  */
+/*  */
+#ifndef	__HAL_8188E_REG_H__
+#define __HAL_8188E_REG_H__
+
+/*  */
+/*  Register Definition */
+/*  */
+#define TRX_ANTDIV_PATH             0x860
+#define RX_ANTDIV_PATH              0xb2c
+#define	ODM_R_A_AGC_CORE1_8188E		0xc50
+
+
+/*  */
+/*  Bitmap Definition */
+/*  */
+#define	BIT_FA_RESET_8188E			BIT0
+
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
new file mode 100644
index 0000000..e574521
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_BB.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_BB_8188E_HW_IMG_H
+#define __INC_BB_8188E_HW_IMG_H
+
+/* static bool CheckCondition(const u32 Condition, const u32 Hex); */
+
+/******************************************************************************
+*                           AGC_TAB_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_AGC_TAB_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+*                           PHY_REG_1T.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_PHY_REG_1T_8188E(struct odm_dm_struct *odm);
+
+/******************************************************************************
+*                           PHY_REG_PG.TXT
+******************************************************************************/
+
+void ODM_ReadAndConfig_PHY_REG_PG_8188E(struct odm_dm_struct *dm_odm);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
new file mode 100644
index 0000000..1bf9bc7
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_FW.h
@@ -0,0 +1,34 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_FW_8188E_HW_IMG_H
+#define __INC_FW_8188E_HW_IMG_H
+
+
+/******************************************************************************
+*                           FW_AP.TXT
+******************************************************************************/
+/******************************************************************************
+*                           FW_WoWLAN.TXT
+******************************************************************************/
+#define ArrayLength_8188E_FW_WoWLAN 15764
+extern const u8 Array_8188E_FW_WoWLAN[ArrayLength_8188E_FW_WoWLAN];
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
new file mode 100644
index 0000000..acf78b9
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_MAC.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_MAC_8188E_HW_IMG_H
+#define __INC_MAC_8188E_HW_IMG_H
+
+/******************************************************************************
+*                           MAC_REG.TXT
+******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_MAC_REG_8188E(struct odm_dm_struct *pDM_Odm);
+
+#endif /*  end of HWIMG_SUPPORT */
diff --git a/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h b/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
new file mode 100644
index 0000000..8ecb40d
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalHWImg8188E_RF.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+*
+* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of version 2 of the GNU General Public License as
+* published by the Free Software Foundation.
+*
+* This program is distributed in the hope that it will be useful, but WITHOUT
+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+* more details.
+*
+* You should have received a copy of the GNU General Public License along with
+* this program; if not, write to the Free Software Foundation, Inc.,
+* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+*
+*
+******************************************************************************/
+
+#ifndef __INC_RF_8188E_HW_IMG_H
+#define __INC_RF_8188E_HW_IMG_H
+
+/******************************************************************************
+ *                           RadioA_1T.TXT
+ ******************************************************************************/
+
+enum HAL_STATUS ODM_ReadAndConfig_RadioA_1T_8188E(struct odm_dm_struct *odm);
+
+#endif /*  end of HWIMG_SUPPORT */
diff --git a/drivers/staging/rtl8188eu/include/HalPhyRf.h b/drivers/staging/rtl8188eu/include/HalPhyRf.h
new file mode 100644
index 0000000..1ec4971
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPhyRf.h
@@ -0,0 +1,30 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+ #ifndef __HAL_PHY_RF_H__
+ #define __HAL_PHY_RF_H__
+
+#define ODM_TARGET_CHNL_NUM_2G_5G	59
+
+void ODM_ResetIQKResult(struct odm_dm_struct *pDM_Odm);
+
+u8 ODM_GetRightChnlPlaceforIQK(u8 chnl);
+
+#endif	/*  #ifndef __HAL_PHY_RF_H__ */
diff --git a/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
new file mode 100644
index 0000000..fa583f2
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPhyRf_8188e.h
@@ -0,0 +1,63 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __HAL_PHY_RF_8188E_H__
+#define __HAL_PHY_RF_8188E_H__
+
+/*--------------------------Define Parameters-------------------------------*/
+#define	IQK_DELAY_TIME_88E		10		/* ms */
+#define	index_mapping_NUM_88E	15
+#define AVG_THERMAL_NUM_88E	4
+
+
+void ODM_TxPwrTrackAdjust88E(struct odm_dm_struct *pDM_Odm,
+			     u8 Type,	/* 0 = OFDM, 1 = CCK */
+			     u8 *pDirection,/* 1 = +(incr) 2 = -(decr) */
+			     u32 *pOutWriteVal); /* Tx tracking CCK/OFDM BB
+						     * swing index adjust */
+
+
+void odm_TXPowerTrackingCallback_ThermalMeter_8188E(struct adapter *Adapter);
+
+
+/* 1 7.	IQK */
+
+void PHY_IQCalibrate_8188E(struct adapter *Adapter, bool ReCovery);
+
+/*  LC calibrate */
+void PHY_LCCalibrate_8188E(struct adapter *pAdapter);
+
+/*  AP calibrate */
+void PHY_APCalibrate_8188E(struct adapter *pAdapter, s8 delta);
+
+void PHY_DigitalPredistortion_8188E(struct adapter *pAdapter);
+
+void _PHY_SaveADDARegisters(struct adapter *pAdapter, u32 *ADDAReg,
+			    u32 *ADDABackup, u32 RegisterNum);
+
+void _PHY_PathADDAOn(struct adapter *pAdapter, u32 *ADDAReg,
+		     bool isPathAOn, bool is2T);
+
+void _PHY_MACSettingCalibration(struct adapter *pAdapter, u32 *MACReg,
+				u32 *MACBackup);
+
+void _PHY_PathAStandBy(struct adapter *pAdapter);
+
+#endif	/*  #ifndef __HAL_PHY_RF_8188E_H__ */
diff --git a/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h b/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
new file mode 100644
index 0000000..d945784
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalPwrSeqCmd.h
@@ -0,0 +1,128 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HALPWRSEQCMD_H__
+#define __HALPWRSEQCMD_H__
+
+#include <drv_types.h>
+
+/*---------------------------------------------*/
+/* 3 The value of cmd: 4 bits */
+/*---------------------------------------------*/
+#define PWR_CMD_READ			0x00
+     /*  offset: the read register offset */
+     /*  msk: the mask of the read value */
+     /*  value: N/A, left by 0 */
+     /*  note: dirver shall implement this function by read & msk */
+
+#define PWR_CMD_WRITE			0x01
+     /*  offset: the read register offset */
+     /*  msk: the mask of the write bits */
+     /*  value: write value */
+     /*  note: driver shall implement this cmd by read & msk after write */
+
+#define PWR_CMD_POLLING			0x02
+     /*  offset: the read register offset */
+     /*  msk: the mask of the polled value */
+     /*  value: the value to be polled, masked by the msd field. */
+     /*  note: driver shall implement this cmd by */
+     /*  do{ */
+     /*  if ( (Read(offset) & msk) == (value & msk) ) */
+     /*  break; */
+     /*  } while (not timeout); */
+
+#define PWR_CMD_DELAY			0x03
+     /*  offset: the value to delay */
+     /*  msk: N/A */
+     /*  value: the unit of delay, 0: us, 1: ms */
+
+#define PWR_CMD_END			0x04
+     /*  offset: N/A */
+     /*  msk: N/A */
+     /*  value: N/A */
+
+/*---------------------------------------------*/
+/* 3 The value of base: 4 bits */
+/*---------------------------------------------*/
+   /*  define the base address of each block */
+#define PWR_BASEADDR_MAC		0x00
+#define PWR_BASEADDR_USB		0x01
+#define PWR_BASEADDR_PCIE		0x02
+#define PWR_BASEADDR_SDIO		0x03
+
+/*---------------------------------------------*/
+/* 3 The value of interface_msk: 4 bits */
+/*---------------------------------------------*/
+#define	PWR_INTF_SDIO_MSK		BIT(0)
+#define	PWR_INTF_USB_MSK		BIT(1)
+#define	PWR_INTF_PCI_MSK		BIT(2)
+#define	PWR_INTF_ALL_MSK		(BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of fab_msk: 4 bits */
+/*---------------------------------------------*/
+#define	PWR_FAB_TSMC_MSK		BIT(0)
+#define	PWR_FAB_UMC_MSK			BIT(1)
+#define	PWR_FAB_ALL_MSK			(BIT(0)|BIT(1)|BIT(2)|BIT(3))
+
+/*---------------------------------------------*/
+/* 3 The value of cut_msk: 8 bits */
+/*---------------------------------------------*/
+#define	PWR_CUT_TESTCHIP_MSK		BIT(0)
+#define	PWR_CUT_A_MSK			BIT(1)
+#define	PWR_CUT_B_MSK			BIT(2)
+#define	PWR_CUT_C_MSK			BIT(3)
+#define	PWR_CUT_D_MSK			BIT(4)
+#define	PWR_CUT_E_MSK			BIT(5)
+#define	PWR_CUT_F_MSK			BIT(6)
+#define	PWR_CUT_G_MSK			BIT(7)
+#define	PWR_CUT_ALL_MSK			0xFF
+
+
+enum pwrseq_cmd_delat_unit {
+	PWRSEQ_DELAY_US,
+	PWRSEQ_DELAY_MS,
+};
+
+struct wl_pwr_cfg {
+	u16 offset;
+	u8 cut_msk;
+	u8 fab_msk:4;
+	u8 interface_msk:4;
+	u8 base:4;
+	u8 cmd:4;
+	u8 msk;
+	u8 value;
+};
+
+#define GET_PWR_CFG_OFFSET(__PWR_CMD)		__PWR_CMD.offset
+#define GET_PWR_CFG_CUT_MASK(__PWR_CMD)		__PWR_CMD.cut_msk
+#define GET_PWR_CFG_FAB_MASK(__PWR_CMD)		__PWR_CMD.fab_msk
+#define GET_PWR_CFG_INTF_MASK(__PWR_CMD)	__PWR_CMD.interface_msk
+#define GET_PWR_CFG_BASE(__PWR_CMD)		__PWR_CMD.base
+#define GET_PWR_CFG_CMD(__PWR_CMD)		__PWR_CMD.cmd
+#define GET_PWR_CFG_MASK(__PWR_CMD)		__PWR_CMD.msk
+#define GET_PWR_CFG_VALUE(__PWR_CMD)		__PWR_CMD.value
+
+
+/*	Prototype of protected function. */
+u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 CutVersion, u8 FabVersion,
+		       u8 InterfaceType, struct wl_pwr_cfg PwrCfgCmd[]);
+
+#endif
diff --git a/drivers/staging/rtl8188eu/include/HalVerDef.h b/drivers/staging/rtl8188eu/include/HalVerDef.h
new file mode 100644
index 0000000..97047cf
--- /dev/null
+++ b/drivers/staging/rtl8188eu/include/HalVerDef.h
@@ -0,0 +1,167 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __HAL_VERSION_DEF_H__
+#define __HAL_VERSION_DEF_H__
+
+enum HAL_IC_TYPE {
+	CHIP_8192S	=	0,
+	CHIP_8188C	=	1,
+	CHIP_8192C	=	2,
+	CHIP_8192D	=	3,
+	CHIP_8723A	=	4,
+	CHIP_8188E	=	5,
+	CHIP_8881A	=	6,
+	CHIP_8812A	=	7,
+	CHIP_8821A	=	8,
+	CHIP_8723B	=	9,
+	CHIP_8192E	=	10,
+};
+
+enum HAL_CHIP_TYPE {
+	TEST_CHIP	=	0,
+	NORMAL_CHIP	=	1,
+	FPGA		=	2,
+};
+
+enum HAL_CUT_VERSION {
+	A_CUT_VERSION	=	0,
+	B_CUT_VERSION	=	1,
+	C_CUT_VERSION	=	2,
+	D_CUT_VERSION	=	3,
+	E_CUT_VERSION	=	4,
+	F_CUT_VERSION	=	5,
+	G_CUT_VERSION	=	6,
+};
+
+enum HAL_VENDOR {
+	CHIP_VENDOR_TSMC	=	0,
+	CHIP_VENDOR_UMC		=	1,
+};
+
+enum HAL_RF_TYPE {
+	RF_TYPE_1T1R	=	0,
+	RF_TYPE_1T2R	=	1,
+	RF_TYPE_2T2R	=	2,
+	RF_TYPE_2T3R	=	3,
+	RF_TYPE_2T4R	=	4,
+	RF_TYPE_3T3R	=	5,
+	RF_TYPE_3T4R	=	6,
+	RF_TYPE_4T4R	=	7,
+};
+
+struct HAL_VERSION {
+	enum HAL_IC_TYPE	ICType;
+	enum HAL_CHIP_TYPE	ChipType;
+	enum HAL_CUT_VERSION	CUTVersion;
+	enum HAL_VENDOR		VendorType;
+	enum HAL_RF_TYPE	RFType;
+	u8			ROMVer;
+};
+
+/*  Get element */
+#define GET_CVID_IC_TYPE(version)	(((version).ICType))
+#define GET_CVID_CHIP_TYPE(version)	(((version).ChipType))
+#define GET_CVID_RF_TYPE(version)	(((version).RFType))
+#define GET_CVID_MANUFACTUER(version)	(((version).VendorType))
+#define GET_CVID_CUT_VERSION(version)	(((version).CUTVersion))
+#define GET_CVID_ROM_VERSION(version)	(((version).ROMVer) & ROM_VERSION_MASK)
+
+/* Common Macro. -- */
+/* HAL_VERSION VersionID */
+
+/*  HAL_IC_TYPE_E */
+#define IS_81XXC(version)				\
+	(((GET_CVID_IC_TYPE(version) == CHIP_8192C) ||	\
+	 (GET_CVID_IC_TYPE(version) == CHIP_8188C)) ? true : false)
+#define IS_8723_SERIES(version)				\
+	((GET_CVID_IC_TYPE(version) == CHIP_8723A) ? true : false)
+#define IS_92D(version)					\
+	((GET_CVID_IC_TYPE(version) == CHIP_8192D) ? true : false)
+#define IS_8188E(version)				\
+	((GET_CVID_IC_TYPE(version) == CHIP_8188E) ? true : false)
+
+/* HAL_CHIP_TYPE_E */
+#define IS_TEST_CHIP(version)				\
+	((GET_CVID_CHIP_TYPE(version) == TEST_CHIP) ? true : false)
+#define IS_NORMAL_CHIP(version)				\
+	((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false)
+
+/* HAL_CUT_VERSION_E */
+#define IS_A_CUT(version)				\
+	((GET_CVID_CUT_VERSION(version) == A_CUT_VERSION) ? true : false)
+#define IS_B_CUT(version)				\
+	((GET_CVID_CUT_VERSION(version) == B_CUT_VERSION) ? true : false)
+#define IS_C_CUT(version)				\
+	((GET_CVID_CUT_VERSION(version) == C_CUT_VERSION) ? true : false)
+#define IS_D_CUT(version)				\
+	((GET_CVID_CUT_VERSION(version) == D_CUT_VERSION) ? true : false)
+#define IS_E_CUT(version)				\
+	((GET_CVID_CUT_VERSION(version) == E_CUT_VERSION) ? true : false)
+
+
+/* HAL_VENDOR_E */
+#define IS_CHIP_VENDOR_TSMC(version)			\
+	((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_TSMC) ? true : false)
+#define IS_CHIP_VENDOR_UMC(version)			\
+	((GET_CVID_MANUFACTUER(version) == CHIP_VENDOR_UMC) ? true : false)
+
+/* HAL_RF_TYPE_E */
+#define IS_1T1R(version)				\
+	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T1R) ? true : false)
+#define IS_1T2R(version)				\
+	((GET_CVID_RF_TYPE(version) == RF_TYPE_1T2R) ? true : false)
+#define IS_2T2R(version)				\
+	((GET_CVID_RF_TYPE(version) == RF_TYPE_2T2R) ? true : false)
+
+/* Chip version Macro. -- */
+#define IS_81XXC_TEST_CHIP(version)			\
+	((IS_81XXC(version) && (!IS_NORMAL_CHIP(version))) ? true : false)
+
+#define IS_92C_SERIAL(version)				\
+	((IS_81XXC(version) && IS_2T2R(version)) ? true : false)
+#define IS_81xxC_VENDOR_UMC_A_CUT(version)		\
+	(IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ?	\
+	(IS_A_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_B_CUT(version)		\
+	(IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ?	\
+	(IS_B_CUT(version) ? true : false) : false) : false)
+#define IS_81xxC_VENDOR_UMC_C_CUT(version)		\
+	(IS_81XXC(version) ? (IS_CHIP_VENDOR_UMC(version) ? \
+	 (IS_C_CUT(version) ? true : false) : false) : false)
+
+#define IS_NORMAL_CHIP92D(version)			\
+	((IS_92D(version)) ?				\
+	((GET_CVID_CHIP_TYPE(version) == NORMAL_CHIP) ? true : false) : false)
+
+#define IS_92D_SINGLEPHY(version)			\
+	((IS_92D(version)) ? (IS_2T2R(version) ? true : false) : false)
+#define IS_92D_C_CUT(version)				\
+	((IS_92D(version)) ? (IS_C_CUT(version) ? true : false) : false)
+#define IS_92D_D_CUT(version)				\
+	((IS_92D(version)) ? (IS_D_CUT(version) ? true : false) : false)
+#define IS_92D_E_CUT(version)				\
+	((IS_92D(version)) ? (IS_E_CUT(version) ? true : false) : false)
+
+#define IS_8723A_A_CUT(version)				\
+	((IS_8723_SERIES(version)) ? (IS_A_CUT(version) ? true : false) : false)
+#define IS_8723A_B_CUT(version)				\
+	((IS_8723_SERIES(version)) ? (IS_B_CUT(version) ? true : false) : false)
+
+#endif
-- 
1.8.1.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux