The Makefile contains the variables needed for the driver to build.
The Makefile.inc isn't needed.
Signed-off-by: Lidza Louina <lidza.louina@xxxxxxxxx>
---
drivers/staging/dgnc/Makefile.inc | 133 --------------------------------------
1 file changed, 133 deletions(-)
delete mode 100644 drivers/staging/dgnc/Makefile.inc
diff --git a/drivers/staging/dgnc/Makefile.inc b/drivers/staging/dgnc/Makefile.inc
deleted file mode 100644
index 6ca38c7..0000000
--- a/drivers/staging/dgnc/Makefile.inc
+++ /dev/null
@@ -1,133 +0,0 @@
-#
-# From Makefile.inc
-#
-
-#
-# Common definitions go here.
-#
-
-#
-# TRUE_VERSION is the version string used in the driver build,
-# it is intended to be in the form:
-#
-# 2.0-0
-#
-# A string noting a particular special modification could be
-# used as well. This string will be reported when the driver
-# is loaded, and will be exposed by its /proc/dgnc/info
-# interface.
-#
-TRUE_VERSION="1.3-16"
-
-#
-# DGNC_PART_NUM is the part number string for the driver package.
-# It should be in the form:
-#
-# 40002369_A
-#
-DGNC_PART_NUM=40002369_F
-
-#
-# DGNC_REL_NOTE is the part number string for the driver release
-# notes. It should be in the form:
-#
-# 93000517_A
-#
-DGNC_REL_NOTE=93000517_F
-
-#
-# DGNC_PKG_VER is the "version" number string included in the
-# various documentation and packaging files. It should be
-# in the form:
-#
-# 1.0
-#
-DGNC_PKG_VER=1.3
-
-#
-# DGNC_PKG_REV is the "revision" of this version. Together,
-# a linux module revision is built with:
-#
-# ${DGNC_PKG_VER}-${DGNC_PKG_REV}
-#
-DGNC_PKG_REV=16
-
-#
-# DRP_PKG_DATE is the "date" string included in (for now) the
-# release notes. It should be in the form:
-#
-# 11/04/2003
-#
-DGNC_PKG_DATE=10/17/2008
-
-INIT_DIR= $(shell \
- if [ -d /etc/rc.d/init.d ]; \
- then echo "$(RPM_BUILD_ROOT)/etc/rc.d/init.d"; \
- else echo "$(RPM_BUILD_ROOT)/etc/init.d"; fi)
-
-#
-# Miscelaneous path macro's
-#
-
-PACKAGE= dgnc
-DEVDIR= /dev/dg/$(PACKAGE)
-SRCDIR= /usr/src/dg/$(PACKAGE)
-BINDIR= /usr/bin
-DRVLIBDIR= /etc/$(PACKAGE)
-MANDIR= /usr/man
-USRLIBDIR= /usr/lib
-DGNCDIR= /etc/dgnc
-
-
-INIT_DIR= $(shell \
- if [ -d /etc/rc.d/init.d ]; \
- then echo "/etc/rc.d/init.d"; \
- else echo "/etc/init.d"; fi)
-
-
-#
-# From Makefile
-#
-ifndef MYPWD
-MYPWD = $(shell pwd)
-endif
-
-ifeq ($(KERNDIR),)
- KERNVERS := $(shell uname -r)
- KERNDIR :=/lib/modules/${KERNVERS}/
-endif
-
-# Grab version and other important stuff
-
-RPMNAME := $(PACKAGE)-$(TRUE_VERSION)
-
-PARTNUM := $(DGNC_PART_NUM)
-
-RELNOTES := $(DGNC_REL_NOTE)
-
-MODDIR = $(shell echo $(BUILDROOT)/lib/modules/3.4.36-lcrs/misc)
-LSMOD = /sbin/lsmod
-RMMOD = /sbin/rmmod
-INSMOD = /sbin/insmod
-NEW_TTY_LOCKING = No
-NEW_TTY_BUFFERING = No
-REGISTER_TTYS_WITH_SYSFS = No
-
-# Send in some extra things...
-EXTRA_CFLAGS += -I${MYPWD} -I${MYPWD}/include -I${MYPWD}/../../commoninc\
- -I${MYPWD}/../../dpa -DLINUX -DDG_NAME=\"$(RPMNAME)\"\
- -DDG_PART=\"$(PARTNUM)\" -DDGNC_TRACER
-
-ifeq ($(NEW_TTY_LOCKING),Yes)
- EXTRA_CFLAGS += -DNEW_TTY_LOCKING
-endif
-
-ifeq ($(NEW_TTY_BUFFERING),Yes)
- EXTRA_CFLAGS += -DNEW_TTY_BUFFERING
-endif
-
-ifeq ($(REGISTER_TTYS_WITH_SYSFS),Yes)
- EXTRA_CFLAGS += -DREGISTER_TTYS_WITH_SYSFS
-endif
-
-# Conform to correct kbuild conventions...
--
1.8.1.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
