[PATCH 16/20] staging: octeon-usb: cvmx-usb: delete duplicated documentation from .h file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Delete duplicated function call documentation from the .h file. These
functions are just internal anyway, and the .h file will be completely
removed in the future when the driver will be made a single self-contained
.c file.

Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
 drivers/staging/octeon-usb/cvmx-usb.h | 363 ----------------------------------
 1 file changed, 363 deletions(-)

diff --git a/drivers/staging/octeon-usb/cvmx-usb.h b/drivers/staging/octeon-usb/cvmx-usb.h
index dc366c8..30d7213 100644
--- a/drivers/staging/octeon-usb/cvmx-usb.h
+++ b/drivers/staging/octeon-usb/cvmx-usb.h
@@ -409,160 +409,14 @@ typedef enum
     __CVMX_USB_PIPE_FLAGS_NEED_PING = 1<<18,    /**< Used internally to determine if a high speed pipe is in the ping state. Do not use */
 } cvmx_usb_pipe_flags_t;
 
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * cvmx_usb_state_t structures.
- *
- * @return Number of port, zero if usb isn't supported
- */
 extern int cvmx_usb_get_num_ports(void);
-
-/**
- * Initialize a USB port for use. This must be called before any
- * other access to the Octeon USB port is made. The port starts
- * off in the disabled state.
- *
- * @param state  Pointer to an empty cvmx_usb_state_t structure
- *               that will be populated by the initialize call.
- *               This structure is then passed to all other USB
- *               functions.
- * @param usb_port_number
- *               Which Octeon USB port to initialize.
- * @param flags  Flags to control hardware initialization. See
- *               cvmx_usb_initialize_flags_t for the flag
- *               definitions. Some flags are mandatory.
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_initialize(cvmx_usb_state_t *state, int usb_port_number,
 			       cvmx_usb_initialize_flags_t flags);
-
-/**
- * Shutdown a USB port after a call to cvmx_usb_initialize().
- * The port should be disabled with all pipes closed when this
- * function is called.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_shutdown(cvmx_usb_state_t *state);
-
-/**
- * Enable a USB port. After this call succeeds, the USB port is
- * online and servicing requests.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_enable(cvmx_usb_state_t *state);
-
-/**
- * Disable a USB port. After this call the USB port will not
- * generate data transfers and will not generate events.
- * Transactions in process will fail and call their
- * associated callbacks.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_disable(cvmx_usb_state_t *state);
-
-/**
- * Get the current state of the USB port. Use this call to
- * determine if the usb port has anything connected, is enabled,
- * or has some sort of error condition. The return value of this
- * call has "changed" bits to signal of the value of some fields
- * have changed between calls. These "changed" fields are based
- * on the last call to cvmx_usb_set_status(). In order to clear
- * them, you must update the status through cvmx_usb_set_status().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return Port status information
- */
 extern cvmx_usb_port_status_t cvmx_usb_get_status(cvmx_usb_state_t *state);
-
-/**
- * Set the current state of the USB port. The status is used as
- * a reference for the "changed" bits returned by
- * cvmx_usb_get_status(). Other than serving as a reference, the
- * status passed to this function is not used. No fields can be
- * changed through this call.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param port_status
- *               Port status to set, most like returned by cvmx_usb_get_status()
- */
 extern void cvmx_usb_set_status(cvmx_usb_state_t *state, cvmx_usb_port_status_t port_status);
-
-/**
- * Open a virtual pipe between the host and a USB device. A pipe
- * must be opened before data can be transferred between a device
- * and Octeon.
- *
- * @param state      USB device state populated by
- *                   cvmx_usb_initialize().
- * @param flags      Optional pipe flags defined in
- *                   cvmx_usb_pipe_flags_t.
- * @param device_addr
- *                   USB device address to open the pipe to
- *                   (0-127).
- * @param endpoint_num
- *                   USB endpoint number to open the pipe to
- *                   (0-15).
- * @param device_speed
- *                   The speed of the device the pipe is going
- *                   to. This must match the device's speed,
- *                   which may be different than the port speed.
- * @param max_packet The maximum packet length the device can
- *                   transmit/receive (low speed=0-8, full
- *                   speed=0-1023, high speed=0-1024). This value
- *                   comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <10:0>.
- * @param transfer_type
- *                   The type of transfer this pipe is for.
- * @param transfer_dir
- *                   The direction the pipe is in. This is not
- *                   used for control pipes.
- * @param interval   For ISOCHRONOUS and INTERRUPT transfers,
- *                   this is how often the transfer is scheduled
- *                   for. All other transfers should specify
- *                   zero. The units are in frames (8000/sec at
- *                   high speed, 1000/sec for full speed).
- * @param multi_count
- *                   For high speed devices, this is the maximum
- *                   allowed number of packet per microframe.
- *                   Specify zero for non high speed devices. This
- *                   value comes from the standard endpoint descriptor
- *                   field wMaxPacketSize bits <12:11>.
- * @param hub_device_addr
- *                   Hub device address this device is connected
- *                   to. Devices connected directly to Octeon
- *                   use zero. This is only used when the device
- *                   is full/low speed behind a high speed hub.
- *                   The address will be of the high speed hub,
- *                   not and full speed hubs after it.
- * @param hub_port   Which port on the hub the device is
- *                   connected. Use zero for devices connected
- *                   directly to Octeon. Like hub_device_addr,
- *                   this is only used for full/low speed
- *                   devices behind a high speed hub.
- *
- * @return A non negative value is a pipe handle. Negative
- *         values are error codes.
- */
 extern int cvmx_usb_open_pipe(cvmx_usb_state_t *state,
                               cvmx_usb_pipe_flags_t flags,
                               int device_addr, int endpoint_num,
@@ -571,111 +425,14 @@ extern int cvmx_usb_open_pipe(cvmx_usb_state_t *state,
                               cvmx_usb_direction_t transfer_dir, int interval,
                               int multi_count, int hub_device_addr,
                               int hub_port);
-
-/**
- * Call to submit a USB Bulk transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are error codes.
- */
 extern int cvmx_usb_submit_bulk(cvmx_usb_state_t *state, int pipe_handle,
                                 uint64_t buffer, int buffer_length,
                                 cvmx_usb_callback_func_t callback,
                                 void *user_data);
-
-/**
- * Call to submit a USB Interrupt transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are error codes.
- */
 extern int cvmx_usb_submit_interrupt(cvmx_usb_state_t *state, int pipe_handle,
                                      uint64_t buffer, int buffer_length,
                                      cvmx_usb_callback_func_t callback,
                                      void *user_data);
-
-/**
- * Call to submit a USB Control transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param control_header
- *                  USB 8 byte control header physical address.
- *                  Note that this is NOT A POINTER, but the
- *                  full 64bit physical address of the buffer.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are error codes.
- */
 extern int cvmx_usb_submit_control(cvmx_usb_state_t *state, int pipe_handle,
                                    uint64_t control_header,
                                    uint64_t buffer, int buffer_length,
@@ -691,50 +448,6 @@ typedef enum
     CVMX_USB_ISOCHRONOUS_FLAGS_ASAP = 1<<1,         /**< Schedule the transaction as soon as possible */
 } cvmx_usb_isochronous_flags_t;
 
-/**
- * Call to submit a USB Isochronous transfer to a pipe.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param pipe_handle
- *                  Handle to the pipe for the transfer.
- * @param start_frame
- *                  Number of frames into the future to schedule
- *                  this transaction.
- * @param flags     Flags to control the transfer. See
- *                  cvmx_usb_isochronous_flags_t for the flag
- *                  definitions.
- * @param number_packets
- *                  Number of sequential packets to transfer.
- *                  "packets" is a pointer to an array of this
- *                  many packet structures.
- * @param packets   Description of each transfer packet as
- *                  defined by cvmx_usb_iso_packet_t. The array
- *                  pointed to here must stay valid until the
- *                  complete callback is called.
- * @param buffer    Physical address of the data buffer in
- *                  memory. Note that this is NOT A POINTER, but
- *                  the full 64bit physical address of the
- *                  buffer. This may be zero if buffer_length is
- *                  zero.
- * @param buffer_length
- *                  Length of buffer in bytes.
- * @param callback  Function to call when this transaction
- *                  completes. If the return value of this
- *                  function isn't an error, then this function
- *                  is guaranteed to be called when the
- *                  transaction completes. If this parameter is
- *                  NULL, then the generic callback registered
- *                  through cvmx_usb_register_callback is
- *                  called. If both are NULL, then there is no
- *                  way to know when a transaction completes.
- * @param user_data User supplied data returned when the
- *                  callback is called. This is only used if
- *                  callback in not NULL.
- *
- * @return A submitted transaction handle or negative on
- *         failure. Negative values are error codes.
- */
 extern int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
                                        int start_frame, int flags,
                                        int number_packets,
@@ -742,91 +455,15 @@ extern int cvmx_usb_submit_isochronous(cvmx_usb_state_t *state, int pipe_handle,
                                        uint64_t buffer, int buffer_length,
                                        cvmx_usb_callback_func_t callback,
                                        void *user_data);
-
-/**
- * Cancel one outstanding request in a pipe. Canceling a request
- * can fail if the transaction has already completed before cancel
- * is called. Even after a successful cancel call, it may take
- * a frame or two for the cvmx_usb_poll() function to call the
- * associated callback.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- * @param submit_handle
- *               Handle to transaction to cancel, returned by the submit function.
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle,
 			   int submit_handle);
-
-
-/**
- * Cancel all outstanding requests in a pipe. Logically all this
- * does is call cvmx_usb_cancel() in a loop.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to cancel requests in.
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle);
-
-/**
- * Close a pipe created with cvmx_usb_open_pipe().
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- * @param pipe_handle
- *               Pipe handle to close.
- *
- * @return 0 or a negative error code. EBUSY is returned if the pipe has
- *	   outstanding transfers.
- */
 extern int cvmx_usb_close_pipe(cvmx_usb_state_t *state, int pipe_handle);
-
-/**
- * Register a function to be called when various USB events occur.
- *
- * @param state     USB device state populated by
- *                  cvmx_usb_initialize().
- * @param reason    Which event to register for.
- * @param callback  Function to call when the event occurs.
- * @param user_data User data parameter to the function.
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_register_callback(cvmx_usb_state_t *state,
 				      cvmx_usb_callback_t reason,
 				      cvmx_usb_callback_func_t callback,
 				      void *user_data);
-
-/**
- * Get the current USB protocol level frame number. The frame
- * number is always in the range of 0-0x7ff.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return USB frame number
- */
 extern int cvmx_usb_get_frame_number(cvmx_usb_state_t *state);
-
-/**
- * Poll the USB block for status and call all needed callback
- * handlers. This function is meant to be called in the interrupt
- * handler for the USB controller. It can also be called
- * periodically in a loop for non-interrupt based operation.
- *
- * @param state  USB device state populated by
- *               cvmx_usb_initialize().
- *
- * @return 0 or a negative error code.
- */
 extern int cvmx_usb_poll(cvmx_usb_state_t *state);
 
 #endif  /* __CVMX_USB_H__ */
-- 
1.8.3.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux