Tidy up this function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/usbdux.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index f9fd0e3..528f384 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -1269,32 +1269,30 @@ ao_cmd_exit:
static int usbdux_dio_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
- struct comedi_insn *insn, unsigned int *data)
+ struct comedi_insn *insn,
+ unsigned int *data)
{
- int chan = CR_CHAN(insn->chanspec);
-
- /* The input or output configuration of each digital line is
- * configured by a special insn_config instruction. chanspec
- * contains the channel to be changed, and data[0] contains the
- * value COMEDI_INPUT or COMEDI_OUTPUT. */
+ unsigned int mask = 1 << CR_CHAN(insn->chanspec);
switch (data[0]) {
case INSN_CONFIG_DIO_OUTPUT:
- s->io_bits |= 1 << chan; /* 1 means Out */
+ s->io_bits |= mask;
break;
case INSN_CONFIG_DIO_INPUT:
- s->io_bits &= ~(1 << chan);
+ s->io_bits &= ~mask;
break;
case INSN_CONFIG_DIO_QUERY:
- data[1] =
- (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
+ data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
break;
default:
return -EINVAL;
break;
}
- /* we don't tell the firmware here as it would take 8 frames */
- /* to submit the information. We do it in the insn_bits. */
+
+ /*
+ * We don't tell the firmware here as it would take 8 frames
+ * to submit the information. We do it in the insn_bits.
+ */
return insn->n;
}
--
1.8.3.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
