[PATCH 22/53] staging: comedi: usbdux: remove 'interface' from private data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This back pointer is only used for a couple dev_printk() messages and
during the detach.

For the dev_printk() we can use the dev->class_dev. In the detach we
can get the usb_interface from the comedi_device.

Do that and remove the back pointer from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/usbdux.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 8db1180..6a757f7 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -227,8 +227,6 @@ struct usbdux_private {
 	int16_t *out_buffer;
 	/* interface number */
 	int ifnum;
-	/* interface structure in 2.6 */
-	struct usb_interface *interface;
 	/* is it USB_SPEED_HIGH or not? */
 	short int high_speed;
 	/* asynchronous command is running */
@@ -634,7 +632,7 @@ static int usbdux_firmware_upload(struct comedi_device *dev,
 		return 0;
 
 	if (size > FIRMWARE_MAX_LEN) {
-		dev_err(&usbduxsub->interface->dev,
+		dev_err(dev->class_dev,
 			"usbdux firmware binary it too large for FX2.\n");
 		return -ENOMEM;
 	}
@@ -660,8 +658,7 @@ static int usbdux_firmware_upload(struct comedi_device *dev,
 			      tmp, 1,
 			      BULK_TIMEOUT);
 	if (ret < 0) {
-		dev_err(&usbduxsub->interface->dev,
-			"comedi_: can not stop firmware\n");
+		dev_err(dev->class_dev, "can not stop firmware\n");
 		goto done;
 	}
 
@@ -673,8 +670,7 @@ static int usbdux_firmware_upload(struct comedi_device *dev,
 			      buf, size,
 			      BULK_TIMEOUT);
 	if (ret < 0) {
-		dev_err(&usbduxsub->interface->dev,
-			"comedi_: firmware upload failed\n");
+		dev_err(dev->class_dev, "firmware upload failed\n");
 		goto done;
 	}
 
@@ -687,8 +683,7 @@ static int usbdux_firmware_upload(struct comedi_device *dev,
 			      tmp, 1,
 			      BULK_TIMEOUT);
 	if (ret < 0)
-		dev_err(&usbduxsub->interface->dev,
-			"comedi_: can not start firmware\n");
+		dev_err(dev->class_dev, "can not start firmware\n");
 
 done:
 	kfree(tmp);
@@ -1902,7 +1897,6 @@ static int usbdux_auto_attach(struct comedi_device *dev,
 	sema_init(&devpriv->sem, 1);
 
 	devpriv->usbdev = usb;
-	devpriv->interface = intf;
 	devpriv->ifnum = intf->altsetting->desc.bInterfaceNumber;
 	usb_set_intfdata(intf, devpriv);
 
@@ -2005,12 +1999,13 @@ static int usbdux_auto_attach(struct comedi_device *dev,
 
 static void usbdux_detach(struct comedi_device *dev)
 {
+	struct usb_interface *intf = comedi_to_usb_interface(dev);
 	struct usbdux_private *devpriv = dev->private;
 
 	if (devpriv) {
 		down(&devpriv->sem);
 
-		usb_set_intfdata(devpriv->interface, NULL);
+		usb_set_intfdata(intf, NULL);
 
 		if (devpriv->pwm_cmd_running)
 			usbduxsub_unlink_pwm_urbs(devpriv);
-- 
1.8.3.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux