[PATCH v2 2/5] staging: rtl8192u: fix comments in r8192U.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch fixes the comments in r8192U.h by:

1) replacing '// ... ' comments with '/* ... */' comments
2) removing from the comments the date and the developer's name
3) removing unnecessary comments when variables naming is
   descriptive enough

Also, it fixes some typos found in the comments and arranges
the comments placement and content aiming to improve code
readability and to limit line length below 80 chars, without
loosing the comment's substance.

Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---

Changes from v1:

1) Removes the following comments (cascade from change in patch 1):
   VI_PRIORITY, //0x05
   BEACON_PRIORITY, //0x0A
   UART_PRIORITY //0x0F
2) Fixes some additional typos and space issues found in comments

 drivers/staging/rtl8192u/r8192U.h |  529 ++++++++++++++++++++-----------------
 1 file changed, 284 insertions(+), 245 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 5e4d46b..5b30e3c 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -1,19 +1,19 @@
 /*
-   This is part of rtl8187 OpenSource driver.
-   Copyright (C) Andrea Merello 2004-2005  <andreamrl@xxxxxxxxxx>
-   Released under the terms of GPL (General Public Licence)
-
-   Parts of this driver are based on the GPL part of the
-   official realtek driver
-
-   Parts of this driver are based on the rtl8192 driver skeleton
-   from Patric Schenke & Andres Salomon
-
-   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-   We want to thank the Authors of those projects and the Ndiswrapper
-   project Authors.
-*/
+ * This is part of rtl8187 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004-2005  <andreamrl@xxxxxxxxxx>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official realtek driver
+ *
+ * Parts of this driver are based on the rtl8192 driver skeleton
+ * from Patric Schenke & Andres Salomon
+ *
+ * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
+ *
+ * We want to thank the Authors of those projects and the Ndiswrapper
+ * project Authors.
+ */
 
 #ifndef R819xU_H
 #define R819xU_H
@@ -29,10 +29,10 @@
 #include <linux/usb.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
-#include <linux/rtnetlink.h>	//for rtnl_lock()
+#include <linux/rtnetlink.h>
 #include <linux/wireless.h>
 #include <linux/timer.h>
-#include <linux/proc_fs.h>	// Necessary because we use the proc fs
+#include <linux/proc_fs.h>
 #include <linux/if_arp.h>
 #include <linux/random.h>
 #include <asm/io.h>
@@ -40,7 +40,7 @@
 
 #define RTL8192U
 #define RTL819xU_MODULE_NAME "rtl819xU"
-//added for HW security, john.0629
+/* HW security */
 #define FALSE 0
 #define TRUE 1
 #define MAX_KEY_LEN     61
@@ -79,7 +79,6 @@
 #define BIT30           0x40000000
 #define BIT31           0x80000000
 
-// Rx smooth factor
 #define	Rx_Smooth_Factor		20
 #define DMESG(x,a...)
 #define DMESGW(x,a...)
@@ -91,44 +90,44 @@ do { if (rt_global_debug_component & component) \
 	       ##args);\
 }while(0);
 
-#define COMP_TRACE				BIT0		// For function call tracing.
-#define COMP_DBG				BIT1		// Only for temporary debug message.
-#define COMP_INIT				BIT2		// during driver initialization / halt / reset.
-
-
-#define COMP_RECV				BIT3		// Receive data path.
-#define COMP_SEND				BIT4		// Send part path.
-#define COMP_IO					BIT5		// I/O Related. Added by Annie, 2006-03-02.
-#define COMP_POWER				BIT6		// 802.11 Power Save mode or System/Device Power state related.
-#define COMP_EPROM				BIT7		// 802.11 link related: join/start BSS, leave BSS.
-#define COMP_SWBW				BIT8	// For bandwidth switch.
-#define COMP_POWER_TRACKING			BIT9	//FOR 8190 TX POWER TRACKING
-#define COMP_TURBO				BIT10	// For Turbo Mode related. By Annie, 2005-10-21.
-#define COMP_QOS				BIT11	// For QoS.
-#define COMP_RATE				BIT12	// For Rate Adaptive mechanism, 2006.07.02, by rcnjko.
-#define COMP_RM					BIT13	// For Radio Measurement.
-#define COMP_DIG				BIT14	// For DIG, 2006.09.25, by rcnjko.
-#define COMP_PHY				BIT15
-#define COMP_CH					BIT16	//channel setting debug
-#define COMP_TXAGC				BIT17	// For Tx power, 060928, by rcnjko.
-#define COMP_HIPWR				BIT18	// For High Power Mechanism, 060928, by rcnjko.
-#define COMP_HALDM				BIT19	// For HW Dynamic Mechanism, 061010, by rcnjko.
-#define COMP_SEC			        BIT20	// Event handling
-#define COMP_LED				BIT21	// For LED.
-#define COMP_RF					BIT22	// For RF.
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-#define COMP_RXDESC				BIT23	// Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
-//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-#define COMP_FIRMWARE				BIT24	//for firmware downloading
-#define COMP_HT					BIT25	// For 802.11n HT related information. by Emily 2006-8-11
-#define COMP_AMSDU				BIT26	// For A-MSDU Debugging
-
-#define COMP_SCAN				BIT27
-#define COMP_DOWN				BIT29  //for rm driver module
-#define COMP_RESET				BIT30  //for silent reset
-#define COMP_ERR				BIT31 //for error out, always on
+#define COMP_TRACE              BIT0  /* Function call tracing. */
+#define COMP_DBG                BIT1
+#define COMP_INIT               BIT2  /* Driver initialization/halt/reset. */
+
+
+#define COMP_RECV               BIT3  /* Receive data path. */
+#define COMP_SEND               BIT4  /* Send data path. */
+#define COMP_IO                 BIT5
+/* 802.11 Power Save mode or System/Device Power state. */
+#define COMP_POWER              BIT6
+/* 802.11 link related: join/start BSS, leave BSS. */
+#define COMP_EPROM              BIT7
+#define COMP_SWBW               BIT8  /* Bandwidth switch. */
+#define COMP_POWER_TRACKING     BIT9  /* 8190 TX Power Tracking */
+#define COMP_TURBO              BIT10 /* Turbo Mode */
+#define COMP_QOS                BIT11
+#define COMP_RATE               BIT12 /* Rate Adaptive mechanism */
+#define COMP_RM                 BIT13 /* Radio Measurement */
+#define COMP_DIG                BIT14
+#define COMP_PHY                BIT15
+#define COMP_CH                 BIT16 /* Channel setting debug */
+#define COMP_TXAGC              BIT17 /* Tx power */
+#define COMP_HIPWR              BIT18 /* High Power Mechanism */
+#define COMP_HALDM              BIT19 /* HW Dynamic Mechanism */
+#define COMP_SEC                BIT20 /* Event handling */
+#define COMP_LED                BIT21
+#define COMP_RF                 BIT22
+#define COMP_RXDESC             BIT23 /* Rx desc information for SD3 debug */
+
+/* 11n or 8190 specific code */
+
+#define COMP_FIRMWARE           BIT24 /* Firmware downloading */
+#define COMP_HT                 BIT25 /* 802.11n HT related information */
+#define COMP_AMSDU              BIT26 /* A-MSDU Debugging */
+#define COMP_SCAN               BIT27
+#define COMP_DOWN               BIT29 /* rm driver module */
+#define COMP_RESET              BIT30 /* Silent reset */
+#define COMP_ERR                BIT31 /* Error out, always on */
 
 #define RTL819x_DEBUG
 #ifdef RTL819x_DEBUG
@@ -137,8 +136,11 @@ do { if (rt_global_debug_component & component) \
 		printk("Assertion failed! %s,%s,%s,line=%d\n", \
 		#expr,__FILE__,__FUNCTION__,__LINE__);          \
 	}
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+/*
+ * Debug out data buf.
+ * If you want to print DATA buffer related BA,
+ * please set ieee80211_debug_level to DATA|BA
+ */
 #define RT_DEBUG_DATA(level, data, datalen)      \
 	do{ if ((rt_global_debug_component & (level)) == (level))   \
 		{       \
@@ -159,9 +161,7 @@ do { if (rt_global_debug_component & component) \
 #endif /* RTL8169_DEBUG */
 
 
-//
-// Queue Select Value in TxDesc
-//
+/* Queue Select Value in TxDesc */
 #define QSLT_BK                                 0x1
 #define QSLT_BE                                 0x0
 #define QSLT_VI                                 0x4
@@ -205,13 +205,13 @@ do { if (rt_global_debug_component & component) \
 
 #define IEEE80211_WATCH_DOG_TIME    2000
 #define		PHY_Beacon_RSSI_SLID_WIN_MAX		10
-//for txpowertracking by amy
+/* For Tx Power Tracking */
 #define		OFDM_Table_Length	19
 #define	CCK_Table_length	12
 
-/* for rtl819x */
+/* For rtl819x */
 typedef struct _tx_desc_819x_usb {
-	//DWORD 0
+	/* DWORD 0 */
 	u16	PktSize;
 	u8	Offset;
 	u8	Reserved0:3;
@@ -221,7 +221,7 @@ typedef struct _tx_desc_819x_usb {
 	u8	LINIP:1;
 	u8	OWN:1;
 
-	//DWORD 1
+	/* DWORD 1 */
 	u8	TxFWInfoSize;
 	u8	RATid:3;
 	u8	DISFB:1;
@@ -236,13 +236,13 @@ typedef struct _tx_desc_819x_usb {
 	u8	SecDescAssign:1;
 	u8	SecType:2;
 
-	//DWORD 2
+	/* DWORD 2 */
 	u16	TxBufferSize;
 	u8	ResvForPaddingLen:7;
 	u8	Reserved3:1;
 	u8	Reserved4;
 
-	//DWORD 3, 4, 5
+	/* DWORD 3, 4, 5 */
 	u32	Reserved5;
 	u32	Reserved6;
 	u32	Reserved7;
@@ -250,12 +250,12 @@ typedef struct _tx_desc_819x_usb {
 
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 typedef struct _tx_desc_819x_usb_aggr_subframe {
-	//DWORD 0
+	/* DWORD 0 */
 	u16	PktSize;
 	u8	Offset;
 	u8	TxFWInfoSize;
 
-	//DWORD 1
+	/* DWORD 1 */
 	u8	RATid:3;
 	u8	DISFB:1;
 	u8	USERATE:1;
@@ -276,7 +276,7 @@ typedef struct _tx_desc_819x_usb_aggr_subframe {
 
 
 typedef struct _tx_desc_cmd_819x_usb {
-	//DWORD 0
+	/* DWORD 0 */
 	u16	Reserved0;
 	u8	Reserved1;
 	u8	Reserved2:3;
@@ -286,17 +286,17 @@ typedef struct _tx_desc_cmd_819x_usb {
 	u8	LINIP:1;
 	u8	OWN:1;
 
-	//DOWRD 1
+	/* DOWRD 1 */
 	u8	TxFWInfoSize;
 	u8	Reserved3;
 	u8	QueueSelect;
 	u8	Reserved4;
 
-	//DOWRD 2
+	/* DOWRD 2 */
 	u16	TxBufferSize;
 	u16	Reserved5;
 
-       //DWORD 3,4,5
+	/* DWORD 3, 4, 5 */
 	u32	Reserved6;
 	u32	Reserved7;
 	u32	Reserved8;
@@ -304,33 +304,36 @@ typedef struct _tx_desc_cmd_819x_usb {
 
 
 typedef struct _tx_fwinfo_819x_usb {
-	//DOWRD 0
-	u8		TxRate:7;
-	u8		CtsEnable:1;
-	u8		RtsRate:7;
-	u8		RtsEnable:1;
-	u8		TxHT:1;
-	u8		Short:1;                //Short PLCP for CCK, or short GI for 11n MCS
-	u8		TxBandwidth:1;          // This is used for HT MCS rate only.
-	u8		TxSubCarrier:2;         // This is used for legacy OFDM rate only.
-	u8		STBC:2;
-	u8		AllowAggregation:1;
-	u8		RtsHT:1;                //Interpret RtsRate field as high throughput data rate
-	u8		RtsShort:1;             //Short PLCP for CCK, or short GI for 11n MCS
-	u8		RtsBandwidth:1;         // This is used for HT MCS rate only.
-	u8		RtsSubcarrier:2;        // This is used for legacy OFDM rate only.
-	u8		RtsSTBC:2;
-	u8		EnableCPUDur:1;         //Enable firmware to recalculate and assign packet duration
-
-	//DWORD 1
-	u32		RxMF:2;
-	u32		RxAMD:3;
-	u32		TxPerPktInfoFeedback:1;//1 indicate Tx info gathtered by firmware and returned by Rx Cmd
-	u32		Reserved1:2;
-	u32		TxAGCOffSet:4;
-	u32		TxAGCSign:1;
-	u32		Tx_INFO_RSVD:6;
-	u32		PacketID:13;
+	/* DOWRD 0 */
+	u8	TxRate:7;
+	u8	CtsEnable:1;
+	u8	RtsRate:7;
+	u8	RtsEnable:1;
+	u8	TxHT:1;
+	u8	Short:1;        /* Error out, always on */
+	u8	TxBandwidth:1;	/* Used for HT MCS rate only */
+	u8	TxSubCarrier:2; /* Used for legacy OFDM rate only */
+	u8	STBC:2;
+	u8	AllowAggregation:1;
+	/* Interpret RtsRate field as high throughput data rate */
+	u8	RtsHT:1;
+	u8	RtsShort:1;     /* Short PLCP for CCK or short GI for 11n MCS */
+	u8	RtsBandwidth:1;	/* Used for HT MCS rate only */
+	u8	RtsSubcarrier:2;/* Used for legacy OFDM rate only */
+	u8	RtsSTBC:2;
+	/* Enable firmware to recalculate and assign packet duration */
+	u8	EnableCPUDur:1;
+
+	/* DWORD 1 */
+	u32	RxMF:2;
+	u32	RxAMD:3;
+	/* 1 indicate Tx info gathered by firmware and returned by Rx Cmd */
+	u32	TxPerPktInfoFeedback:1;
+	u32	Reserved1:2;
+	u32	TxAGCOffSet:4;
+	u32	TxAGCSign:1;
+	u32	Tx_INFO_RSVD:6;
+	u32	PacketID:13;
 }tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
 
 typedef struct rtl8192_rx_info {
@@ -340,7 +343,7 @@ typedef struct rtl8192_rx_info {
 }rtl8192_rx_info ;
 
 typedef struct rx_desc_819x_usb{
-	//DOWRD 0
+	/* DOWRD 0 */
 	u16                 Length:14;
 	u16                 CRC32:1;
 	u16                 ICV:1;
@@ -350,37 +353,30 @@ typedef struct rx_desc_819x_usb{
 	u8                  SWDec:1;
 	u8                  Reserved1:4;
 
-	//DWORD 1
+	/* DWORD 1 */
 	u32                 Reserved2;
-
-	//DWORD 2
-
-	//DWORD 3
-
 }rx_desc_819x_usb, *prx_desc_819x_usb;
 
 #ifdef USB_RX_AGGREGATION_SUPPORT
 typedef struct _rx_desc_819x_usb_aggr_subframe{
-	//DOWRD 0
+	/* DOWRD 0 */
 	u16			Length:14;
 	u16			CRC32:1;
 	u16			ICV:1;
 	u8			Offset;
 	u8			RxDrvInfoSize;
-	//DOWRD 1
+	/* DOWRD 1 */
 	u8			Shift:2;
 	u8			PHYStatus:1;
 	u8			SWDec:1;
 	u8			Reserved1:4;
 	u8			Reserved2;
 	u16			Reserved3;
-	//DWORD 2
-	//DWORD 3
 }rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe;
 #endif
 
 typedef struct rx_drvinfo_819x_usb{
-	//DWORD 0
+	/* DWORD 0 */
 	u16                 Reserved1:12;
 	u16                 PartAggr:1;
 	u16                 FirstAGGR:1;
@@ -397,14 +393,15 @@ typedef struct rx_drvinfo_819x_usb{
 	u8                  Bcast:1;
 	u8                  Reserved4:1;
 
-	//DWORD 1
+	/* DWORD 1 */
 	u32                  TSFL;
 
 }rx_drvinfo_819x_usb, *prx_drvinfo_819x_usb;
 
-
-#define MAX_DEV_ADDR_SIZE		8  /* support till 64 bit bus width OS */
-#define MAX_FIRMWARE_INFORMATION_SIZE   32 /*2006/04/30 by Emily forRTL8190*/
+/* Support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE		8
+/* For RTL8190 */
+#define MAX_FIRMWARE_INFORMATION_SIZE   32
 #define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
 #define ENCRYPTION_MAX_OVERHEAD		128
 #define	USB_HWDESC_HEADER_LEN		sizeof(tx_desc_819x_usb)
@@ -422,7 +419,8 @@ typedef struct rx_drvinfo_819x_usb{
 #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
 #define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb))
 #endif
-#define scrclng					4		// octets for crc32 (FCS, ICV)
+/* Octets for crc32 (FCS, ICV) */
+#define scrclng					4
 
 typedef enum rf_optype
 {
@@ -460,13 +458,13 @@ typedef struct _rt_firmare_seg_container {
 typedef struct _rt_firmware{
 	firmware_status_e firmware_status;
 	u16               cmdpacket_frag_thresold;
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000   //64k
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE  64000
 	u8                firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];
 	u16               firmware_buf_size;
 }rt_firmware, *prt_firmware;
 
-//+by amy 080507
-#define MAX_RECEIVE_BUFFER_SIZE	9100	// Add this to 9100 bytes to receive A-MSDU from RT-AP
+/* Add this to 9100 bytes to receive A-MSDU from RT-AP */
+#define MAX_RECEIVE_BUFFER_SIZE	9100
 
 typedef struct _rt_firmware_info_819xUsb{
 	u8		sz_info[16];
@@ -511,8 +509,11 @@ typedef struct _rt_firmware_info_819xUsb{
 #define RSVD_FW_QUEUE_PAGE_CMD_SHIFT	0x08
 #define RSVD_FW_QUEUE_PAGE_BCN_SHIFT	0x00
 #define RSVD_FW_QUEUE_PAGE_PUB_SHIFT	0x08
-//=================================================================
-//=================================================================
+
+/*
+ * =================================================================
+ * =================================================================
+ */
 
 #define EPROM_93c46 0
 #define EPROM_93c56 1
@@ -571,31 +572,37 @@ typedef struct _rt_9x_tx_rate_history {
 	u32             ht_mcs[4][16];
 }rt_tx_rahis_t, *prt_tx_rahis_t;
 typedef struct _RT_SMOOTH_DATA_4RF {
-	char    elements[4][100];//array to store values
-	u32     index;                  //index to current array to store
-	u32     TotalNum;               //num of valid elements
-	u32     TotalVal[4];            //sum of valid elements
+	char    elements[4][100]; /* array to store values */
+	u32     index;            /* index to current array to store */
+	u32     TotalNum;         /* num of valid elements */
+	u32     TotalVal[4];      /* sum of valid elements */
 }RT_SMOOTH_DATA_4RF, *PRT_SMOOTH_DATA_4RF;
 
-#define MAX_8192U_RX_SIZE			8192    // This maybe changed for D-cut larger aggregation size
-//stats seems messed up, clean it ASAP
+/* This maybe changed for D-cut larger aggregation size */
+#define MAX_8192U_RX_SIZE			8192
+/* Stats seems messed up, clean it ASAP */
 typedef struct Stats {
 	unsigned long txrdu;
 	unsigned long rxok;
 	unsigned long rxframgment;
 	unsigned long rxurberr;
 	unsigned long rxstaterr;
-	unsigned long received_rate_histogram[4][32];	//0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
-	unsigned long received_preamble_GI[2][32];		//0: Long preamble/GI, 1:Short preamble/GI
-	unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
-	unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
-	unsigned long numpacket_matchbssid;	// debug use only.
-	unsigned long numpacket_toself;		// debug use only.
-	unsigned long num_process_phyinfo;		// debug use only.
+	/* 0: Total, 1: OK, 2: CRC, 3: ICV */
+	unsigned long received_rate_histogram[4][32];
+	/* 0: Long preamble/GI, 1: Short preamble/GI */
+	unsigned long received_preamble_GI[2][32];
+	/* level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K) */
+	unsigned long rx_AMPDUsize_histogram[5];
+	/* level: (<5), (5~10), (10~20), (20~40), (>40) */
+	unsigned long rx_AMPDUnum_histogram[5];
+	unsigned long numpacket_matchbssid;
+	unsigned long numpacket_toself;
+	unsigned long num_process_phyinfo;
 	unsigned long numqry_phystatus;
 	unsigned long numqry_phystatusCCK;
 	unsigned long numqry_phystatusHT;
-	unsigned long received_bwtype[5];              //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
+	/* 0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate */
+	unsigned long received_bwtype[5];
 	unsigned long txnperr;
 	unsigned long txnpdrop;
 	unsigned long txresumed;
@@ -649,30 +656,35 @@ typedef struct Stats {
 	u8	      last_packet_rate;
 	unsigned long slide_signal_strength[100];
 	unsigned long slide_evm[100];
-	unsigned long slide_rssi_total;	// For recording sliding window's RSSI value
-	unsigned long slide_evm_total;	// For recording sliding window's EVM value
-	long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct.
+	/* For recording sliding window's RSSI value */
+	unsigned long slide_rssi_total;
+	/* For recording sliding window's EVM value */
+	unsigned long slide_evm_total;
+	/* Transformed in dbm. Beautified signal strength for UI, not correct */
+	long signal_strength;
 	long signal_quality;
 	long last_signal_strength_inpercent;
-	long recv_signal_power;	// Correct smoothed ss in Dbm, only used in driver to report real power now.
+	/* Correct smoothed ss in dbm, only used in driver
+	 * to report real power now */
+	long recv_signal_power;
 	u8 rx_rssi_percentage[4];
 	u8 rx_evm_percentage[2];
 	long rxSNRdB[4];
 	rt_tx_rahis_t txrate;
-	u32 Slide_Beacon_pwdb[100];     //cosa add for beacon rssi
-	u32 Slide_Beacon_Total;         //cosa add for beacon rssi
+	/* For beacon RSSI */
+	u32 Slide_Beacon_pwdb[100];
+	u32 Slide_Beacon_Total;
 	RT_SMOOTH_DATA_4RF              cck_adc_pwdb;
 
 	u32	CurrentShowTxate;
 } Stats;
 
 
-// Bandwidth Offset
+/* Bandwidth Offset */
 #define HAL_PRIME_CHNL_OFFSET_DONT_CARE		0
 #define HAL_PRIME_CHNL_OFFSET_LOWER			1
 #define HAL_PRIME_CHNL_OFFSET_UPPER			2
 
-//+by amy 080507
 
 typedef struct	ChnlAccessSetting {
 	u16 SIFS_Timer;
@@ -684,23 +696,50 @@ typedef struct	ChnlAccessSetting {
 }*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING;
 
 typedef struct _BB_REGISTER_DEFINITION{
-	u32 rfintfs;			// set software control: //		0x870~0x877[8 bytes]
-	u32 rfintfi;			// readback data: //		0x8e0~0x8e7[8 bytes]
-	u32 rfintfo;			// output data: //		0x860~0x86f [16 bytes]
-	u32 rfintfe;			// output enable: //		0x860~0x86f [16 bytes]
-	u32 rf3wireOffset;		// LSSI data: //		0x840~0x84f [16 bytes]
-	u32 rfLSSI_Select;		// BB Band Select: //		0x878~0x87f [8 bytes]
-	u32 rfTxGainStage;		// Tx gain stage: //		0x80c~0x80f [4 bytes]
-	u32 rfHSSIPara1;		// wire parameter control1 : //		0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
-	u32 rfHSSIPara2;		// wire parameter control2 : //		0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
-	u32 rfSwitchControl;	//Tx Rx antenna control : //		0x858~0x85f [16 bytes]
-	u32 rfAGCControl1;	//AGC parameter control1 : //		0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
-	u32 rfAGCControl2;	//AGC parameter control2 : //		0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
-	u32 rfRxIQImbalance;	//OFDM Rx IQ imbalance matrix : //		0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
-	u32 rfRxAFE;			//Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : //		0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
-	u32 rfTxIQImbalance;	//OFDM Tx IQ imbalance matrix //		0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
-	u32 rfTxAFE;			//Tx IQ DC Offset and Tx DFIR type //		0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
-	u32 rfLSSIReadBack;	//LSSI RF readback data //		0x8a0~0x8af [16 bytes]
+	/* set software control:        0x870~0x877 [8 bytes]  */
+	u32 rfintfs;
+	/* readback data:               0x8e0~0x8e7 [8 bytes]  */
+	u32 rfintfi;
+	/* output data:                 0x860~0x86f [16 bytes] */
+	u32 rfintfo;
+	/* output enable:               0x860~0x86f [16 bytes] */
+	u32 rfintfe;
+	/* LSSI data:                   0x840~0x84f [16 bytes] */
+	u32 rf3wireOffset;
+	/* BB Band Select:              0x878~0x87f [8 bytes]  */
+	u32 rfLSSI_Select;
+	/* Tx gain stage:               0x80c~0x80f [4 bytes]  */
+	u32 rfTxGainStage;
+	/* wire parameter control1:     0x820~0x823, 0x828~0x82b,
+	 *                              0x830~0x833, 0x838~0x83b [16 bytes] */
+	u32 rfHSSIPara1;
+	/* wire parameter control2:     0x824~0x827, 0x82c~0x82f,
+	 *                              0x834~0x837, 0x83c~0x83f [16 bytes] */
+	u32 rfHSSIPara2;
+	/* Tx Rx antenna control:       0x858~0x85f [16 bytes] */
+	u32 rfSwitchControl;
+	/* AGC parameter control1:	0xc50~0xc53, 0xc58~0xc5b,
+	 *                              0xc60~0xc63, 0xc68~0xc6b [16 bytes] */
+	u32 rfAGCControl1;
+	/* AGC parameter control2:      0xc54~0xc57, 0xc5c~0xc5f,
+	 *                              0xc64~0xc67, 0xc6c~0xc6f [16 bytes] */
+	u32 rfAGCControl2;
+	/* OFDM Rx IQ imbalance matrix:	0xc14~0xc17, 0xc1c~0xc1f,
+	 *                              0xc24~0xc27, 0xc2c~0xc2f [16 bytes] */
+	u32 rfRxIQImbalance;
+	/* Rx IQ DC offset and Rx digital filter, Rx DC notch filter:
+	 *                              0xc10~0xc13, 0xc18~0xc1b,
+	 *                              0xc20~0xc23, 0xc28~0xc2b [16 bytes] */
+	u32 rfRxAFE;
+	/* OFDM Tx IQ imbalance matrix:	0xc80~0xc83, 0xc88~0xc8b,
+	 *                              0xc90~0xc93, 0xc98~0xc9b [16 bytes] */
+	u32 rfTxIQImbalance;
+	/* Tx IQ DC Offset and Tx DFIR type:
+	 *                              0xc84~0xc87, 0xc8c~0xc8f,
+	 *                              0xc94~0xc97, 0xc9c~0xc9f [16 bytes] */
+	u32 rfTxAFE;
+	/* LSSI RF readback data:       0x8a0~0x8af [16 bytes] */
+	u32 rfLSSIReadBack;
 }BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
 
 typedef enum _RT_RF_TYPE_819xU{
@@ -727,9 +766,9 @@ typedef struct _rate_adaptive {
 	u32				low_rssi_threshold_ratr;
 	u32				low_rssi_threshold_ratr_40M;
 	u32				low_rssi_threshold_ratr_20M;
-	u8				ping_rssi_enable;	//cosa add for test
-	u32				ping_rssi_ratr;	//cosa add for test
-	u32				ping_rssi_thresh_for_ra;//cosa add for test
+	u8				ping_rssi_enable;
+	u32				ping_rssi_ratr;
+	u32				ping_rssi_thresh_for_ra;
 	u32				last_ratr;
 
 } rate_adaptive, *prate_adaptive;
@@ -743,7 +782,7 @@ typedef struct _txbbgain_struct {
 } txbbgain_struct, *ptxbbgain_struct;
 
 typedef struct _ccktxbbgain_struct {
-	//The Value is from a22 to a29 one Byte one time is much Safer
+	/* The value is from a22 to a29, one byte one time is much safer */
 	u8	ccktxbb_valuearray[8];
 } ccktxbbgain_struct,*pccktxbbgain_struct;
 
@@ -756,7 +795,6 @@ typedef struct _init_gain {
 	u8				cca;
 
 } init_gain, *pinit_gain;
-//by amy 0606
 
 typedef struct _phy_ofdm_rx_status_report_819xusb {
 	u8	trsw_gain_X[4];
@@ -775,8 +813,9 @@ typedef struct _phy_ofdm_rx_status_report_819xusb {
 }phy_sts_ofdm_819xusb_t;
 
 typedef struct _phy_cck_rx_status_report_819xusb {
-	/* For CCK rate descriptor. This is a unsigned 8:1 variable. LSB bit presend
-	   0.5. And MSB 7 bts presend a signed value. Range from -64~+63.5. */
+	/* For CCK rate descriptor. This is an unsigned 8:1 variable.
+	 * LSB bit presend 0.5. And MSB 7 bts presend a signed value.
+	 * Range from -64~+63.5. */
 	u8	adc_pwdb_X[4];
 	u8	sq_rpt;
 	u8	cck_agc_rpt;
@@ -801,24 +840,27 @@ typedef enum _RT_CUSTOMER_ID
 	RT_CID_819x_CAMEO  = 6,
 	RT_CID_819x_RUNTOP = 7,
 	RT_CID_819x_Senao = 8,
-	RT_CID_TOSHIBA = 9,	// Merge by Jacken, 2008/01/31.
+	RT_CID_TOSHIBA = 9,
 	RT_CID_819x_Netcore = 10,
 	RT_CID_Nettronix = 11,
 	RT_CID_DLINK = 12,
 	RT_CID_PRONET = 13,
 }RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
 
-//================================================================================
-// LED customization.
-//================================================================================
+/*
+ * ==========================================================================
+ * LED customization.
+ * ==========================================================================
+ */
 
 typedef	enum _LED_STRATEGY_8190{
-	SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
-	SW_LED_MODE1, // SW control for PCI Express
-	SW_LED_MODE2, // SW control for Cameo.
-	SW_LED_MODE3, // SW contorl for RunTop.
-	SW_LED_MODE4, // SW control for Netcore
-	HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+	SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
+	SW_LED_MODE1, /* SW control for PCI Express */
+	SW_LED_MODE2, /* SW control for Cameo. */
+	SW_LED_MODE3, /* SW control for RunTop. */
+	SW_LED_MODE4, /* SW control for Netcore. */
+	/* HW control 2 LEDs, LED0 and LED1 (4 different control modes) */
+	HW_LED,
 }LED_STRATEGY_8190, *PLED_STRATEGY_8190;
 
 typedef enum _RESET_TYPE {
@@ -840,7 +882,7 @@ typedef enum _tag_TxCmd_Config_Index{
 
 typedef struct r8192_priv {
 	struct usb_device *udev;
-	//added for maintain info from eeprom
+	/* For maintain info from eeprom */
 	short epromtype;
 	u16 eeprom_vid;
 	u16 eeprom_pid;
@@ -852,8 +894,10 @@ typedef struct r8192_priv {
 	int irq;
 	struct ieee80211_device *ieee80211;
 
-	short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
-	u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
+	/* O: rtl8192, 1: rtl8185 V B/C, 2: rtl8185 V D */
+	short card_8192;
+	/* If TCR reports card V B/C, this discriminates */
+	u8 card_8192_version;
 	short enable_gpio0;
 	enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
 	short hw_plcp_len;
@@ -870,12 +914,13 @@ typedef struct r8192_priv {
 
 
 	short up;
-	short crcmon; //if 1 allow bad crc frame reception in monitor mode
+	/* If 1, allow bad crc frame, reception in monitor mode */
+	short crcmon;
 
 	struct semaphore wx_sem;
-	struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
+	struct semaphore rf_sem;	/* Used to lock rf write operation */
 
-	u8 rf_type; //0 means 1T2R, 1 means 2T4R
+	u8 rf_type;			/* 0: 1T2R, 1: 2T4R */
 	RT_RF_TYPE_819xU rf_chip;
 
 	short (*rf_set_sens)(struct net_device *dev,short sens);
@@ -883,46 +928,45 @@ typedef struct r8192_priv {
 	void (*rf_close)(struct net_device *dev);
 	void (*rf_init)(struct net_device *dev);
 	short promisc;
-	/*stats*/
+	/* Stats */
 	struct Stats stats;
 	struct iw_statistics wstats;
 
-	/*RX stuff*/
+	/* RX stuff */
 	struct urb **rx_urb;
 	struct urb **rx_cmd_urb;
 #ifdef THOMAS_BEACON
 	u32 *oldaddr;
 #endif
 #ifdef THOMAS_TASKLET
-	atomic_t irt_counter;//count for irq_rx_tasklet
+	atomic_t irt_counter; /* count for irq_rx_tasklet */
 #endif
 #ifdef JACKSON_NEW_RX
 	struct sk_buff **pp_rxskb;
 	int     rx_inx;
 #endif
 
-/* modified by davad for Rx process */
        struct sk_buff_head rx_queue;
        struct sk_buff_head skb_queue;
        struct work_struct qos_activate;
 	short  tx_urb_index;
-	atomic_t tx_pending[0x10];//UART_PRIORITY+1
+	atomic_t tx_pending[0x10]; /* UART_PRIORITY + 1 */
 
 
 	struct tasklet_struct irq_rx_tasklet;
 	struct urb *rxurb_task;
 
-	//2 Tx Related variables
+	/* Tx Related variables */
 	u16	ShortRetryLimit;
 	u16	LongRetryLimit;
 	u32	TransmitConfig;
-	u8	RegCWinMin;		// For turbo mode CW adaptive. Added by Annie, 2005-10-27.
+	u8	RegCWinMin;	/* For turbo mode CW adaptive */
 
 	u32     LastRxDescTSFHigh;
 	u32     LastRxDescTSFLow;
 
 
-	//2 Rx Related variables
+	/* Rx Related variables */
 	u16	EarlyRxThreshold;
 	u32	ReceiveConfig;
 	u8	AcmControl;
@@ -937,13 +981,13 @@ typedef struct r8192_priv {
 	struct work_struct reset_wq;
 
 /**********************************************************/
-	//for rtl819xUsb
+	/* For rtl819xUsb */
 	u16     basic_rate;
 	u8      short_preamble;
 	u8      slot_time;
 	bool	bDcut;
 	bool bCurrentRxAggrEnable;
-	u8 Rf_Mode; //add for Firmware RF -R/W switch
+	u8 Rf_Mode;	/* For Firmware RF -R/W switch */
 	prt_firmware		pFirmware;
 	rtl819xUsb_loopback_e	LoopbackMode;
 	u16 EEPROMTxPowerDiff;
@@ -951,71 +995,70 @@ typedef struct r8192_priv {
 	u8 EEPROMPwDiff;
 	u8 EEPROMCrystalCap;
 	u8 EEPROM_Def_Ver;
-	u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
+	u8 EEPROMTxPowerLevelCCK;		/* CCK channel 1~14 */
 	u8 EEPROMTxPowerLevelCCK_V1[3];
-	u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
-	u8 EEPROMTxPowerLevelOFDM5G[24];	// OFDM 5G
+	u8 EEPROMTxPowerLevelOFDM24G[3];	/* OFDM 2.4G channel 1~14 */
+	u8 EEPROMTxPowerLevelOFDM5G[24];	/* OFDM 5G */
 
-/*PHY related*/
-	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
-	// Read/write are allow for following hardware information variables
+	/* PHY related */
+	BB_REGISTER_DEFINITION_T PHYRegDef[4];	/* Radio A/B/C/D */
+	/* Read/write are allow for following hardware information variables */
 	u32	MCSTxPowerLevelOriginalOffset[6];
 	u32	CCKTxPowerLevelOriginalOffset;
-	u8	TxPowerLevelCCK[14];			// CCK channel 1~14
-	u8	TxPowerLevelOFDM24G[14];		// OFDM 2.4G channel 1~14
-	u8	TxPowerLevelOFDM5G[14];			// OFDM 5G
+	u8	TxPowerLevelCCK[14];		/* CCK channel 1~14 */
+	u8	TxPowerLevelOFDM24G[14];	/* OFDM 2.4G channel 1~14 */
+	u8	TxPowerLevelOFDM5G[14];		/* OFDM 5G */
 	u32	Pwr_Track;
 	u8	TxPowerDiff;
-	u8	AntennaTxPwDiff[2];				// Antenna gain offset, index 0 for B, 1 for C, and 2 for D
-	u8	CrystalCap;						// CrystalCap.
-	u8	ThermalMeter[2];				// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+	u8	AntennaTxPwDiff[2]; /* Antenna gain offset, 0: B, 1: C, 2: D */
+	u8	CrystalCap;
+	u8	ThermalMeter[2];    /* index 0: RFIC0, index 1: RFIC1 */
 
 	u8	CckPwEnl;
-	// Use to calculate PWBD.
+	/* Use to calculate PWBD */
 	u8	bCckHighPower;
 	long	undecorated_smoothed_pwdb;
 
-	//for set channel
+	/* For set channel */
 	u8	SwChnlInProgress;
 	u8	SwChnlStage;
 	u8	SwChnlStep;
 	u8	SetBWModeInProgress;
 	HT_CHANNEL_WIDTH		CurrentChannelBW;
 	u8      ChannelPlan;
-	// 8190 40MHz mode
-	//
-	u8	nCur40MhzPrimeSC;	// Control channel sub-carrier
-	// Joseph test for shorten RF configuration time.
-	// We save RF reg0 in this variable to reduce RF reading.
-	//
+	/* 8190 40MHz mode */
+	/* Control channel sub-carrier */
+	u8	nCur40MhzPrimeSC;
+	/* Test for shorten RF configuration time.
+	 * We save RF reg0 in this variable to reduce RF reading. */
 	u32					RfReg0Value[4];
 	u8					NumTotalRFPath;
 	bool				brfpath_rxenable[4];
-	//RF set related
+	/* RF set related */
 	bool				SetRFPowerStateInProgress;
-//+by amy 080507
 	struct timer_list watch_dog_timer;
 
-//+by amy 080515 for dynamic mechenism
-	//Add by amy Tx Power Control for Near/Far Range 2008/05/15
-	bool	bdynamic_txpower;  //bDynamicTxPower
-	bool	bDynamicTxHighPower;  // Tx high power state
-	bool	bDynamicTxLowPower;  // Tx low power state
+	/* For dynamic mechanism */
+	/* Tx Power Control for Near/Far Range */
+	bool	bdynamic_txpower;
+	bool	bDynamicTxHighPower;
+	bool	bDynamicTxLowPower;
 	bool	bLastDTPFlag_High;
 	bool	bLastDTPFlag_Low;
 
 	bool	bstore_last_dtpflag;
-	bool	bstart_txctrl_bydtp;   //Define to discriminate on High power State or on sitesuvey to change Tx gain index
-	//Add by amy for Rate Adaptive
+	/* Define to discriminate on High power State or
+	 * on sitesurvey to change Tx gain index */
+	bool	bstart_txctrl_bydtp;
 	rate_adaptive rate_adaptive;
-	//Add by amy for TX power tracking
-	//2008/05/15  Mars OPEN/CLOSE TX POWER TRACKING
-       txbbgain_struct txbbgain_table[TxBBGainTableLength];
-	u8			   txpower_count;//For 6 sec do tracking again
-	bool			   btxpower_trackingInit;
-	u8			   OFDM_index;
-	u8			   CCK_index;
-	//2007/09/10 Mars Add CCK TX Power Tracking
+	/* TX power tracking
+	 * OPEN/CLOSE TX POWER TRACKING */
+	txbbgain_struct txbbgain_table[TxBBGainTableLength];
+	u8		txpower_count; /* For 6 sec do tracking again */
+	bool		btxpower_trackingInit;
+	u8		OFDM_index;
+	u8		CCK_index;
+	/* CCK TX Power Tracking */
 	ccktxbbgain_struct	cck_txbbgain_table[CCKTxBBGainTableLength];
 	ccktxbbgain_struct	cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
 	u8 rfa_txpowertrackingindex;
@@ -1032,15 +1075,14 @@ typedef struct r8192_priv {
 	bool bcck_in_ch14;
 	bool btxpowerdata_readfromEEPORM;
 	u16	TSSI_13dBm;
-	//For Backup Initial Gain
 	init_gain initgain_backup;
 	u8 DefaultInitialGain[4];
-	// For EDCA Turbo mode, Added by amy 080515.
+	/* For EDCA Turbo mode */
 	bool		bis_any_nonbepkts;
 	bool		bcurrent_turbo_EDCA;
 	bool		bis_cur_rdlstate;
 	struct timer_list fsync_timer;
-	bool bfsync_processing;	// 500ms Fsync timer is active or not
+	bool bfsync_processing;	/* 500ms Fsync timer is active or not */
 	u32	rate_record;
 	u32	rateCountDiffRecord;
 	u32	ContinueDiffCount;
@@ -1049,17 +1091,14 @@ typedef struct r8192_priv {
 	u8	framesync;
 	u32	framesyncC34;
 	u8	framesyncMonitor;
-		//Added by amy 080516  for RX related
 	u16	nrxAMPDU_size;
 	u8	nrxAMPDU_aggr_num;
 
-	//by amy for gpio
+	/* For gpio */
 	 bool bHwRadioOff;
 
-	//by amy for reset_count
 	u32 reset_count;
 	bool bpbc_pressed;
-	//by amy for debug
 	u32 txpower_checkcnt;
 	u32 txpower_tracking_callback_cnt;
 	u8 thermal_read_val[40];
@@ -1068,7 +1107,7 @@ typedef struct r8192_priv {
 	u32 ccktxpower_adjustcnt_ch14;
 	u8 tx_fwinfo_force_subcarriermode;
 	u8 tx_fwinfo_force_subcarrierval;
-	//by amy for silent reset
+	/* For silent reset */
 	RESET_TYPE	ResetProgress;
 	bool		bForcedSilentReset;
 	bool		bDisableNormalResetCheck;
@@ -1081,7 +1120,7 @@ typedef struct r8192_priv {
 
 	u16		SifsTime;
 
-	//define work item by amy 080526
+	/* Define work item */
 
 	struct delayed_work update_beacon_wq;
 	struct delayed_work watch_dog_wq;
@@ -1092,23 +1131,23 @@ typedef struct r8192_priv {
 	struct workqueue_struct *priv_wq;
 }r8192_priv;
 
-//for rtl8187B
+/* For rtl8187B */
 typedef enum{
 	BULK_PRIORITY = 0x01,
 	LOW_PRIORITY,
 	NORM_PRIORITY,
 	VO_PRIORITY,
-	VI_PRIORITY, //0x05
+	VI_PRIORITY,
 	BE_PRIORITY,
 	BK_PRIORITY,
 	RSVD2,
 	RSVD3,
-	BEACON_PRIORITY, //0x0A
+	BEACON_PRIORITY,
 	HIGH_PRIORITY,
 	MANAGE_PRIORITY,
 	RSVD4,
 	RSVD5,
-	UART_PRIORITY //0x0F
+	UART_PRIORITY
 } priority_t;
 
 typedef enum{
-- 
1.7.10.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux