Fix placement of braces in structs and unions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
drivers/staging/octeon-usb/cvmx-usbnx-defs.h | 27 +++++++++-----------------
1 file changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
index 801d835..9dd1233 100644
--- a/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
+++ b/drivers/staging/octeon-usb/cvmx-usbnx-defs.h
@@ -83,11 +83,9 @@
*
* This register is used to control the frequency of the hclk and the hreset and phy_rst signals.
*/
-union cvmx_usbnx_clk_ctl
-{
+union cvmx_usbnx_clk_ctl {
uint64_t u64;
- struct cvmx_usbnx_clk_ctl_s
- {
+ struct cvmx_usbnx_clk_ctl_s {
uint64_t reserved_20_63 : 44;
uint64_t divide2 : 2; /**< The 'hclk' used by the USB subsystem is derived
from the eclk.
@@ -159,8 +157,7 @@ union cvmx_usbnx_clk_ctl
The ENABLE field of this register should not be set
until AFTER this field is set and then read. */
} s;
- struct cvmx_usbnx_clk_ctl_cn30xx
- {
+ struct cvmx_usbnx_clk_ctl_cn30xx {
uint64_t reserved_18_63 : 46;
uint64_t hclk_rst : 1; /**< When this field is '0' the HCLK-DIVIDER used to
generate the hclk in the USB Subsystem is held
@@ -227,8 +224,7 @@ union cvmx_usbnx_clk_ctl
The hclk frequency must be less than 125 MHz. */
} cn30xx;
struct cvmx_usbnx_clk_ctl_cn30xx cn31xx;
- struct cvmx_usbnx_clk_ctl_cn50xx
- {
+ struct cvmx_usbnx_clk_ctl_cn50xx {
uint64_t reserved_20_63 : 44;
uint64_t divide2 : 2; /**< The 'hclk' used by the USB subsystem is derived
from the eclk.
@@ -315,11 +311,9 @@ typedef union cvmx_usbnx_clk_ctl cvmx_usbnx_clk_ctl_t;
*
* Contains general control and status information for the USBN block.
*/
-union cvmx_usbnx_usbp_ctl_status
-{
+union cvmx_usbnx_usbp_ctl_status {
uint64_t u64;
- struct cvmx_usbnx_usbp_ctl_status_s
- {
+ struct cvmx_usbnx_usbp_ctl_status_s {
uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
@@ -432,8 +426,7 @@ union cvmx_usbnx_usbp_ctl_status
are available within a specific period after the
de-assertion. */
} s;
- struct cvmx_usbnx_usbp_ctl_status_cn30xx
- {
+ struct cvmx_usbnx_usbp_ctl_status_cn30xx {
uint64_t reserved_38_63 : 26;
uint64_t bist_done : 1; /**< PHY Bist Done.
Asserted at the end of the PHY BIST sequence. */
@@ -527,8 +520,7 @@ union cvmx_usbnx_usbp_ctl_status
are available within a specific period after the
de-assertion. */
} cn30xx;
- struct cvmx_usbnx_usbp_ctl_status_cn50xx
- {
+ struct cvmx_usbnx_usbp_ctl_status_cn50xx {
uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
@@ -621,8 +613,7 @@ union cvmx_usbnx_usbp_ctl_status
are available within a specific period after the
de-assertion. */
} cn50xx;
- struct cvmx_usbnx_usbp_ctl_status_cn52xx
- {
+ struct cvmx_usbnx_usbp_ctl_status_cn52xx {
uint64_t txrisetune : 1; /**< HS Transmitter Rise/Fall Time Adjustment */
uint64_t txvreftune : 4; /**< HS DC Voltage Level Adjustment */
uint64_t txfslstune : 4; /**< FS/LS Source Impedence Adjustment */
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
