This patch fixes the following checkpatch warning:
WARNING: __func__ should be used instead of gcc
specific __FUNCTION__
Signed-off-by: Xenia Ragiadakou <burzalodowa@xxxxxxxxx>
---
drivers/staging/rtl8192u/r8192U_core.c | 64 ++++++++++++++++----------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 471b7ff..f790292 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -209,7 +209,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv *priv)
max_chan = 14;
}
else {
- RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __func__);
}
if (ChannelPlan[channel_plan].Len != 0) {
// Clear old channel map
@@ -813,7 +813,7 @@ void rtl8192_set_chan(struct net_device *dev, short ch)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
// u32 tx;
- RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __FUNCTION__, ch);
+ RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __func__, ch);
priv->chan = ch;
/* this hack should avoid frame TX during channel setting*/
@@ -1080,7 +1080,7 @@ static void rtl8192_rx_isr(struct urb *urb)
skb = dev_alloc_skb(RX_URB_SIZE);
if (unlikely(!skb)) {
usb_free_urb(urb);
- printk("%s():can,t alloc skb\n", __FUNCTION__);
+ printk("%s():can,t alloc skb\n", __func__);
/* TODO check rx queue length and refill *somewhere* */
return;
}
@@ -1748,7 +1748,7 @@ unsigned int txqueue2outpipe(struct r8192_priv *priv, unsigned int tx_queue) {
if (tx_queue >= 9)
{
- RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "%s():Unknown queue ID!!!\n", __func__);
return 0x04;
}
return priv->txqueue_to_outpipemap[tx_queue];
@@ -2446,7 +2446,7 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv,
spin_unlock_irqrestore(&priv->ieee80211->lock, flags);
- RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __FUNCTION__, network->flags, priv->ieee80211->current_network.qos_data.active);
+ RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __func__, network->flags, priv->ieee80211->current_network.qos_data.active);
if (set_qos_param == 1)
queue_work(priv->priv_wq, &priv->qos_activate);
@@ -2625,7 +2625,7 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode)
wireless_mode = WIRELESS_MODE_B;
}
else{
- RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __FUNCTION__, bSupportMode);
+ RT_TRACE(COMP_ERR, "%s(), No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n", __func__, bSupportMode);
wireless_mode = WIRELESS_MODE_B;
}
}
@@ -2811,12 +2811,12 @@ static void rtl8192_get_eeprom_size(struct net_device *dev)
{
u16 curCR = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
- RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
curCR = read_nic_word_E(dev, EPROM_CMD);
RT_TRACE(COMP_EPROM, "read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
//whether need I consider BIT5?
priv->epromtype = (curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
- RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype);
+ RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __func__, priv->epromtype);
}
//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead.
@@ -2833,7 +2833,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
u8 bLoad_From_EEPOM = false;
struct r8192_priv *priv = ieee80211_priv(dev);
u16 tmpValue = 0;
- RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_EPROM, "===========>%s()\n", __func__);
wEPROM_ID = eprom_read(dev, 0); //first read EEPROM ID out;
RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", wEPROM_ID);
@@ -3066,7 +3066,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
init_rate_adaptive(dev);
//we need init DIG RATR table here again.
- RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_EPROM, "<===========%s()\n", __func__);
return;
}
@@ -3232,7 +3232,7 @@ bool rtl8192_adapter_start(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
u32 dwRegRead = 0;
bool init_status = true;
- RT_TRACE(COMP_INIT, "====>%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_INIT, "====>%s()\n", __func__);
priv->Rf_Mode = RF_OP_By_SW_3wire;
//for ASIC power on sequence
write_nic_byte_E(dev, 0x5f, 0x80);
@@ -3252,7 +3252,7 @@ bool rtl8192_adapter_start(struct net_device *dev)
else if (priv->pFirmware->firmware_status == FW_STATUS_5_READY)
dwRegRead |= CPU_GEN_FIRMWARE_RESET;
else
- RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __FUNCTION__, priv->pFirmware->firmware_status);
+ RT_TRACE(COMP_ERR, "ERROR in %s(): undefined firmware state(%d)\n", __func__, priv->pFirmware->firmware_status);
write_nic_dword(dev, CPU_GEN, dwRegRead);
//mdelay(30);
@@ -3269,7 +3269,7 @@ bool rtl8192_adapter_start(struct net_device *dev)
else if (priv->LoopbackMode == RTL819xU_MAC_LOOPBACK)
dwRegRead |= CPU_CCK_LOOPBACK;
else
- RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __FUNCTION__, priv->LoopbackMode);
+ RT_TRACE(COMP_ERR, "Serious error in %s(): wrong loopback mode setting(%d)\n", __func__, priv->LoopbackMode);
write_nic_dword(dev, CPU_GEN, dwRegRead);
@@ -3363,10 +3363,10 @@ bool rtl8192_adapter_start(struct net_device *dev)
init_status = init_firmware(dev);
if (!init_status)
{
- RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "ERR!!! %s(): Firmware download is failed\n", __func__);
return init_status;
}
- RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__);
+ RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
//
#ifdef TO_DO_LIST
if (Adapter->ResetProgress == RESET_TYPE_NORESET)
@@ -3405,7 +3405,7 @@ if (Adapter->ResetProgress == RESET_TYPE_NORESET)
//config RF.
if (priv->ResetProgress == RESET_TYPE_NORESET){
rtl8192_phy_RFConfig(dev);
- RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__);
+ RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __func__);
}
@@ -3500,7 +3500,7 @@ HalTxCheckStuck819xUsb(
struct r8192_priv *priv = ieee80211_priv(dev);
u16 RegTxCounter = read_nic_word(dev, 0x128);
bool bStuck = FALSE;
- RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __FUNCTION__, RegTxCounter, priv->TxCounter);
+ RT_TRACE(COMP_RESET, "%s():RegTxCounter is %d,TxCounter is %d\n", __func__, RegTxCounter, priv->TxCounter);
if (priv->TxCounter == RegTxCounter)
bStuck = TRUE;
@@ -3564,7 +3564,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = FALSE;
static u8 rx_chk_cnt;
- RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __FUNCTION__, RegRxCounter, priv->RxCounter);
+ RT_TRACE(COMP_RESET, "%s(): RegRxCounter is %d,RxCounter is %d\n", __func__, RegRxCounter, priv->RxCounter);
// If rssi is small, we should check rx for long time because of bad rx.
// or maybe it will continuous silent reset every 2 seconds.
rx_chk_cnt++;
@@ -3689,7 +3689,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev)
if (TxResetType == RESET_TYPE_NORMAL || RxResetType == RESET_TYPE_NORMAL)
return RESET_TYPE_NORMAL;
else if (TxResetType == RESET_TYPE_SILENT || RxResetType == RESET_TYPE_SILENT){
- RT_TRACE(COMP_RESET, "%s():silent reset\n", __FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():silent reset\n", __func__);
return RESET_TYPE_SILENT;
}
else
@@ -3868,12 +3868,12 @@ RESET_START:
down(&priv->wx_sem);
if (priv->up == 0)
{
- RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "%s():the driver is not up! return\n", __func__);
up(&priv->wx_sem);
return;
}
priv->up = 0;
- RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():======>start to down the driver\n", __func__);
// if(!netif_queue_stopped(dev))
// netif_stop_queue(dev);
@@ -3898,12 +3898,12 @@ RESET_START:
printk("ieee->state is NOT LINKED\n");
ieee80211_softmac_stop_protocol(priv->ieee80211); }
up(&priv->wx_sem);
- RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():<==========down process is finished\n", __func__);
//rtl8192_irq_disable(dev);
- RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():===========>start up the driver\n", __func__);
reset_status = _rtl8192_up(dev);
- RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __FUNCTION__);
+ RT_TRACE(COMP_RESET, "%s():<===========up process is finished\n", __func__);
if (reset_status == -EAGAIN)
{
if (reset_times < 3)
@@ -3913,7 +3913,7 @@ RESET_START:
}
else
{
- RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, " ERR!!! %s(): Reset Failed!!\n", __func__);
}
}
ieee->is_silent_reset = 1;
@@ -4052,9 +4052,9 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
{
#ifdef TODO
if (rfState == eRfOff)
- RT_TRACE(COMP_ERR, "========>%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "========>%s()\n", __func__);
#endif
- printk("===>%s(): AP is power off,connect another one\n", __FUNCTION__);
+ printk("===>%s(): AP is power off,connect another one\n", __func__);
// Dot11d_Reset(dev);
priv->ieee80211->state = IEEE80211_ASSOCIATING;
notify_wx_assoc_event(priv->ieee80211);
@@ -4080,7 +4080,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
(priv->bForcedSilentReset ||
(!priv->bDisableNormalResetCheck && ResetType == RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo
{
- RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __FUNCTION__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
+ RT_TRACE(COMP_RESET, "%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n", __func__, priv->force_reset, priv->ResetProgress, priv->bForcedSilentReset, priv->bDisableNormalResetCheck, ResetType);
rtl819x_ifsilentreset(dev);
}
priv->force_reset = false;
@@ -4108,7 +4108,7 @@ int _rtl8192_up(struct net_device *dev)
init_status = rtl8192_adapter_start(dev);
if (!init_status)
{
- RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __FUNCTION__);
+ RT_TRACE(COMP_ERR, "ERR!!! %s(): initialization failed!\n", __func__);
priv->up = priv->ieee80211->ieee_up = 0;
return -EAGAIN;
}
@@ -4174,7 +4174,7 @@ int rtl8192_down(struct net_device *dev)
priv->up = 0;
priv->ieee80211->ieee_up = 0;
- RT_TRACE(COMP_DOWN, "==========>%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_DOWN, "==========>%s()\n", __func__);
/* FIXME */
if (!netif_queue_stopped(dev))
netif_stop_queue(dev);
@@ -4203,7 +4203,7 @@ int rtl8192_down(struct net_device *dev)
ieee80211_softmac_stop_protocol(priv->ieee80211);
memset(&priv->ieee80211->current_network, 0, offsetof(struct ieee80211_network, list));
- RT_TRACE(COMP_DOWN, "<==========%s()\n", __FUNCTION__);
+ RT_TRACE(COMP_DOWN, "<==========%s()\n", __func__);
return 0;
}
@@ -5903,7 +5903,7 @@ void EnableHWSecurityConfig8192(struct net_device *dev)
ieee->hwsec_active = 0;
SECR_value &= ~SCR_RxDecEnable;
}
- RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __FUNCTION__, \
+ RT_TRACE(COMP_SEC, "%s:, hwsec:%d, pairwise_key:%d, SECR_value:%x\n", __func__, \
ieee->hwsec_active, ieee->pairwise_key_type, SECR_value);
{
write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
