For consistency in the driver, change all the dev_{level} messages
so they use dev->class_dev for the device.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/usbduxfast.c | 82 ++++++++++++-----------------
1 file changed, 35 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index f645956..c87cc5a 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -180,7 +180,7 @@ static int send_dux_commands(struct comedi_device *dev, int cmd_type)
devpriv->dux_commands,
SIZEOFDUXBUFFER, &nsent, 10000);
if (tmp < 0)
- dev_err(&devpriv->intf->dev,
+ dev_err(dev->class_dev,
"could not transmit dux_commands to the usb-device, err=%d\n",
tmp);
return tmp;
@@ -351,7 +351,7 @@ static void usbduxfast_ai_interrupt(struct urb *urb)
urb->status = 0;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- dev_err(&urb->dev->dev,
+ dev_err(dev->class_dev,
"urb resubm failed: %d", err);
async->events |= COMEDI_CB_EOA;
async->events |= COMEDI_CB_ERROR;
@@ -383,8 +383,7 @@ static int usbduxfastsub_start(struct comedi_device *dev)
1, /* Length */
EZTIMEOUT); /* Timeout */
if (ret < 0)
- dev_err(&devpriv->intf->dev,
- "control msg failed (start)\n");
+ dev_err(dev->class_dev, "control msg failed (start)\n");
kfree(local_transfer_buffer);
return ret;
@@ -411,8 +410,7 @@ static int usbduxfastsub_stop(struct comedi_device *dev)
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
if (ret < 0)
- dev_err(&devpriv->intf->dev,
- "control msg failed (stop)\n");
+ dev_err(dev->class_dev, "control msg failed (stop)\n");
kfree(local_transfer_buffer);
return ret;
@@ -436,7 +434,7 @@ static int usbduxfastsub_upload(struct comedi_device *dev,
len, /* length */
EZTIMEOUT); /* timeout */
if (ret < 0) {
- dev_err(&devpriv->intf->dev, "uppload failed\n");
+ dev_err(dev->class_dev, "uppload failed\n");
return ret;
}
@@ -458,8 +456,7 @@ static int usbduxfastsub_submit_InURBs(struct comedi_device *dev)
ret = usb_submit_urb(devpriv->urbIn, GFP_ATOMIC);
if (ret) {
- dev_err(&devpriv->intf->dev,
- "ai: usb_submit_urb error %d\n", ret);
+ dev_err(dev->class_dev, "usb_submit_urb error %d\n", ret);
return ret;
}
return 0;
@@ -571,7 +568,7 @@ static int usbduxfast_ai_inttrig(struct comedi_device *dev,
down(&devpriv->sem);
if (trignum != 0) {
- dev_err(dev->class_dev, "%s: invalid trignum\n", __func__);
+ dev_err(dev->class_dev, "invalid trignum\n");
up(&devpriv->sem);
return -EINVAL;
}
@@ -579,16 +576,14 @@ static int usbduxfast_ai_inttrig(struct comedi_device *dev,
devpriv->ai_cmd_running = 1;
ret = usbduxfastsub_submit_InURBs(dev);
if (ret < 0) {
- dev_err(dev->class_dev,
- "%s: urbSubmit: err=%d\n", __func__, ret);
+ dev_err(dev->class_dev, "urbSubmit: err=%d\n", ret);
devpriv->ai_cmd_running = 0;
up(&devpriv->sem);
return ret;
}
s->async->inttrig = NULL;
} else {
- dev_err(dev->class_dev,
- "ai_inttrig but acqu is already running\n");
+ dev_err(dev->class_dev, "ai is already running\n");
}
up(&devpriv->sem);
return 1;
@@ -618,8 +613,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
down(&devpriv->sem);
if (devpriv->ai_cmd_running) {
- dev_err(dev->class_dev,
- "ai_cmd not possible. Another ai_cmd is running.\n");
+ dev_err(dev->class_dev, "ai_cmd not possible\n");
up(&devpriv->sem);
return -EBUSY;
}
@@ -638,20 +632,19 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
chan = CR_CHAN(cmd->chanlist[i]);
if (chan != i) {
dev_err(dev->class_dev,
- "cmd is accepting only consecutive channels.\n");
+ "channels are not consecutive\n");
up(&devpriv->sem);
return -EINVAL;
}
if ((gain != CR_RANGE(cmd->chanlist[i]))
&& (cmd->chanlist_len > 3)) {
dev_err(dev->class_dev,
- "the gain must be the same for all channels.\n");
+ "gain must be the same for all channels\n");
up(&devpriv->sem);
return -EINVAL;
}
if (i >= NUMCHANNELS) {
- dev_err(dev->class_dev,
- "channel list too long\n");
+ dev_err(dev->class_dev, "chanlist too long\n");
break;
}
}
@@ -659,7 +652,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
steps = 0;
if (cmd->scan_begin_src == TRIG_TIMER) {
dev_err(dev->class_dev,
- "scan_begin_src==TRIG_TIMER not valid.\n");
+ "scan_begin_src==TRIG_TIMER not valid\n");
up(&devpriv->sem);
return -EINVAL;
}
@@ -668,20 +661,20 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
if ((steps < MIN_SAMPLING_PERIOD) && (cmd->chanlist_len != 1)) {
dev_err(dev->class_dev,
- "ai_cmd: steps=%ld, scan_begin_arg=%d. Not properly tested by cmdtest?\n",
+ "steps=%ld, scan_begin_arg=%d. Not properly tested by cmdtest?\n",
steps, cmd->scan_begin_arg);
up(&devpriv->sem);
return -EINVAL;
}
if (steps > MAX_SAMPLING_PERIOD) {
- dev_err(dev->class_dev, "ai_cmd: sampling rate too low.\n");
+ dev_err(dev->class_dev, "sampling rate too low\n");
up(&devpriv->sem);
return -EINVAL;
}
if ((cmd->start_src == TRIG_EXT) && (cmd->chanlist_len != 1)
&& (cmd->chanlist_len != 16)) {
dev_err(dev->class_dev,
- "ai_cmd: TRIG_EXT only with 1 or 16 channels possible.\n");
+ "TRIG_EXT only with 1 or 16 channels possible\n");
up(&devpriv->sem);
return -EINVAL;
}
@@ -1003,7 +996,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
result = send_dux_commands(dev, SENDADCOMMANDS);
if (result < 0) {
dev_err(dev->class_dev,
- "adc command could not be submitted. Aborting...\n");
+ "adc command could not be submitted, aborting\n");
up(&devpriv->sem);
return result;
}
@@ -1011,7 +1004,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
devpriv->ai_sample_count = cmd->stop_arg * cmd->scan_end_arg;
if (devpriv->ai_sample_count < 1) {
dev_err(dev->class_dev,
- "(cmd->stop_arg)*(cmd->scan_end_arg)<1, aborting.\n");
+ "(cmd->stop_arg)*(cmd->scan_end_arg)<1, aborting\n");
up(&devpriv->sem);
return -EFAULT;
}
@@ -1059,14 +1052,14 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
int err;
if (!devpriv) {
- dev_err(dev->class_dev, "%s: no usb dev.\n", __func__);
+ dev_err(dev->class_dev, "no usb dev\n");
return -ENODEV;
}
down(&devpriv->sem);
if (devpriv->ai_cmd_running) {
dev_err(dev->class_dev,
- "ai_insn_read not possible. Async Command is running.\n");
+ "ai_insn_read not possible, async cmd is running\n");
up(&devpriv->sem);
return -EBUSY;
}
@@ -1123,7 +1116,7 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
err = send_dux_commands(dev, SENDADCOMMANDS);
if (err < 0) {
dev_err(dev->class_dev,
- "adc command could not be submitted. Aborting...\n");
+ "adc command could not be submitted, aborting\n");
up(&devpriv->sem);
return err;
}
@@ -1134,7 +1127,7 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
devpriv->transfer_buffer, SIZEINBUF,
&actual_length, 10000);
if (err < 0) {
- dev_err(dev->class_dev, "insn timeout. No data.\n");
+ dev_err(dev->class_dev, "insn timeout, no data\n");
up(&devpriv->sem);
return err;
}
@@ -1152,7 +1145,7 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
}
n = actual_length / sizeof(uint16_t);
if ((n % 16) != 0) {
- dev_err(dev->class_dev, "insn data packet corrupted.\n");
+ dev_err(dev->class_dev, "insn data packet corrupted\n");
up(&devpriv->sem);
return -EINVAL;
}
@@ -1170,46 +1163,40 @@ static int usbduxfast_ai_insn_read(struct comedi_device *dev,
static int firmwareUpload(struct comedi_device *dev,
const u8 *firmwareBinary, int sizeFirmware)
{
- struct usbduxfast_private *devpriv = dev->private;
- int ret;
uint8_t *fwBuf;
+ int ret;
if (!firmwareBinary)
return 0;
if (sizeFirmware > FIRMWARE_MAX_LEN) {
- dev_err(&devpriv->intf->dev,
- "comedi_: usbduxfast firmware binary it too large for FX2.\n");
+ dev_err(dev->class_dev, "firmware binary too large for FX2\n");
return -ENOMEM;
}
/* we generate a local buffer for the firmware */
fwBuf = kmemdup(firmwareBinary, sizeFirmware, GFP_KERNEL);
if (!fwBuf) {
- dev_err(&devpriv->intf->dev,
- "comedi_: mem alloc for firmware failed\n");
+ dev_err(dev->class_dev, "mem alloc for firmware failed\n");
return -ENOMEM;
}
ret = usbduxfastsub_stop(dev);
if (ret < 0) {
- dev_err(&devpriv->intf->dev,
- "comedi_: can not stop firmware\n");
+ dev_err(dev->class_dev, "can not stop firmware\n");
kfree(fwBuf);
return ret;
}
ret = usbduxfastsub_upload(dev, fwBuf, 0, sizeFirmware);
if (ret < 0) {
- dev_err(&devpriv->intf->dev,
- "comedi_: firmware upload failed\n");
+ dev_err(dev->class_dev, "firmware upload failed\n");
kfree(fwBuf);
return ret;
}
ret = usbduxfastsub_start(dev);
if (ret < 0) {
- dev_err(&devpriv->intf->dev,
- "comedi_: can not start firmware\n");
+ dev_err(dev->class_dev, "can not start firmware\n");
kfree(fwBuf);
return ret;
}
@@ -1277,7 +1264,7 @@ static int usbduxfast_auto_attach(struct comedi_device *dev,
int ret;
if (usb->speed != USB_SPEED_HIGH) {
- dev_err(&intf->dev,
+ dev_err(dev->class_dev,
"This driver needs USB 2.0 to operate. Aborting...\n");
return -ENODEV;
}
@@ -1303,14 +1290,14 @@ static int usbduxfast_auto_attach(struct comedi_device *dev,
ret = usb_set_interface(devpriv->usb,
intf->altsetting->desc.bInterfaceNumber, 1);
if (ret < 0) {
- dev_err(&intf->dev,
+ dev_err(dev->class_dev,
"could not switch to alternate setting 1\n");
return -ENODEV;
}
devpriv->urbIn = usb_alloc_urb(0, GFP_KERNEL);
if (!devpriv->urbIn) {
- dev_err(&intf->dev, "Could not alloc. urb\n");
+ dev_err(dev->class_dev, "Could not alloc. urb\n");
return -ENOMEM;
}
@@ -1324,7 +1311,8 @@ static int usbduxfast_auto_attach(struct comedi_device *dev,
*/
ret = usbduxfast_request_firmware(dev);
if (ret) {
- dev_err(&intf->dev, "could not load firmware (err=%d)\n", ret);
+ dev_err(dev->class_dev, "could not load firmware (err=%d)\n",
+ ret);
return ret;
}
--
1.8.1.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
