Only the command_{write,read} usb endpoints are used by this driver.
Remove the message_pipe, and {read,write}_stream endpoint information
from the usb private data.
Rename the variables used for command endpoints to help keep the
lines < 80 chars.
Also, rename a couple of the local variables used to enumerate the
endpoints to also help keep the lines < 80 chars.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/dt9812.c | 51 ++++++++++++++-------------------
1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 3e471ba..ac5629c 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -273,7 +273,7 @@ struct usb_dt9812 {
struct {
__u8 addr;
size_t size;
- } message_pipe, command_write, command_read, write_stream, read_stream;
+ } cmd_wr, cmd_rd;
struct kref kref;
u16 analog_out_shadow[2];
u8 digital_out_shadow;
@@ -317,12 +317,12 @@ static int dt9812_read_info(struct usb_dt9812 *dev, int offset, void *buf,
cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size);
/* DT9812 only responds to 32 byte writes!! */
- ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->command_write.addr),
+ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->cmd_wr.addr),
&cmd, 32, &count, HZ * 1);
if (ret)
return ret;
- return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, dev->command_read.addr),
+ return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, dev->cmd_rd.addr),
buf, buf_size, &count, HZ * 1);
}
@@ -339,12 +339,12 @@ static int dt9812_read_multiple_registers(struct usb_dt9812 *dev, int reg_count,
cmd.u.read_multi_info.address[i] = address[i];
/* DT9812 only responds to 32 byte writes!! */
- ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->command_write.addr),
+ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->cmd_wr.addr),
&cmd, 32, &count, HZ * 1);
if (ret)
return ret;
- return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, dev->command_read.addr),
+ return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, dev->cmd_rd.addr),
value, reg_count, &count, HZ * 1);
}
@@ -364,7 +364,7 @@ static int dt9812_write_multiple_registers(struct usb_dt9812 *dev,
}
/* DT9812 only responds to 32 byte writes!! */
- return usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->command_write.addr),
+ return usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->cmd_wr.addr),
&cmd, 32, &count, HZ * 1);
}
@@ -381,7 +381,7 @@ static int dt9812_rmw_multiple_registers(struct usb_dt9812 *dev, int reg_count,
cmd.u.rmw_multi_info.rmw[i] = rmw[i];
/* DT9812 only responds to 32 byte writes!! */
- return usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->command_write.addr),
+ return usb_bulk_msg(usb, usb_sndbulkpipe(usb, dev->cmd_wr.addr),
&cmd, 32, &count, HZ * 1);
}
@@ -842,8 +842,8 @@ static int dt9812_probe(struct usb_interface *interface,
{
struct slot_dt9812 *slot = NULL;
struct usb_dt9812 *dev = NULL;
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
+ struct usb_host_interface *host;
+ struct usb_endpoint_descriptor *ep;
int retval = -ENOMEM;
int i;
u8 fw;
@@ -881,51 +881,42 @@ static int dt9812_probe(struct usb_interface *interface,
dev->interface = interface;
/* Check endpoints */
- iface_desc = interface->cur_altsetting;
+ host = interface->cur_altsetting;
- if (iface_desc->desc.bNumEndpoints != 5) {
+ if (host->desc.bNumEndpoints != 5) {
dev_err(&interface->dev, "Wrong number of endpoints.\n");
retval = -ENODEV;
goto error;
}
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ for (i = 0; i < host->desc.bNumEndpoints; ++i) {
int direction = -1;
- endpoint = &iface_desc->endpoint[i].desc;
+ ep = &host->endpoint[i].desc;
switch (i) {
case 0:
+ /* unused message pipe */
direction = USB_DIR_IN;
- dev->message_pipe.addr = endpoint->bEndpointAddress;
- dev->message_pipe.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
-
break;
case 1:
direction = USB_DIR_OUT;
- dev->command_write.addr = endpoint->bEndpointAddress;
- dev->command_write.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
+ dev->cmd_wr.addr = ep->bEndpointAddress;
+ dev->cmd_wr.size = le16_to_cpu(ep->wMaxPacketSize);
break;
case 2:
direction = USB_DIR_IN;
- dev->command_read.addr = endpoint->bEndpointAddress;
- dev->command_read.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
+ dev->cmd_rd.addr = ep->bEndpointAddress;
+ dev->cmd_rd.size = le16_to_cpu(ep->wMaxPacketSize);
break;
case 3:
+ /* unused write stream */
direction = USB_DIR_OUT;
- dev->write_stream.addr = endpoint->bEndpointAddress;
- dev->write_stream.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
break;
case 4:
+ /* unused read stream */
direction = USB_DIR_IN;
- dev->read_stream.addr = endpoint->bEndpointAddress;
- dev->read_stream.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
break;
}
- if ((endpoint->bEndpointAddress & USB_DIR_IN) != direction) {
+ if ((ep->bEndpointAddress & USB_DIR_IN) != direction) {
dev_err(&interface->dev,
"Endpoint has wrong direction.\n");
retval = -ENODEV;
--
1.8.1.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
