[PATCH 34/79] staging: comedi: dt2814: use comedi_request_region()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/dt2814.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index e4d629e..46dca8e 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -246,15 +246,10 @@ static int dt2814_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	int i, irq;
 	int ret;
 	struct comedi_subdevice *s;
-	unsigned long iobase;
 
-	iobase = it->options[0];
-	printk(KERN_INFO "comedi%d: dt2814: 0x%04lx ", dev->minor, iobase);
-	if (!request_region(iobase, DT2814_SIZE, "dt2814")) {
-		printk(KERN_ERR "I/O port conflict\n");
-		return -EIO;
-	}
-	dev->iobase = iobase;
+	ret = comedi_request_region(dev, it->options[0], DT2814_SIZE);
+	if (ret)
+		return ret;
 
 	outb(0, dev->iobase + DT2814_CSR);
 	udelay(100);
-- 
1.8.1.4

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel




[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux