Cleanup the multi-line comments at the beginning of the file to follow
the kernel CodingStyle.
Remove the comments before rt1800_attach(). They are a duplicate of
the "Configuration Options" in the Comedi comment block at the start
of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/rti800.c | 118 ++++++++++++++------------------
1 file changed, 51 insertions(+), 67 deletions(-)
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index cb9c72c..8091e93 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -1,56 +1,57 @@
/*
- comedi/drivers/rti800.c
- Hardware driver for Analog Devices RTI-800/815 board
-
- COMEDI - Linux Control and Measurement Device Interface
- Copyright (C) 1998 David A. Schleef <ds@xxxxxxxxxxx>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
+ * comedi/drivers/rti800.c
+ * Hardware driver for Analog Devices RTI-800/815 board
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1998 David A. Schleef <ds@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
/*
-Driver: rti800
-Description: Analog Devices RTI-800/815
-Author: ds
-Status: unknown
-Updated: Fri, 05 Sep 2008 14:50:44 +0100
-Devices: [Analog Devices] RTI-800 (rti800), RTI-815 (rti815)
-
-Configuration options:
- [0] - I/O port base address
- [1] - IRQ (not supported / unused)
- [2] - A/D reference
- 0 = differential
- 1 = pseudodifferential (common)
- 2 = single-ended
- [3] - A/D range
- 0 = [-10,10]
- 1 = [-5,5]
- 2 = [0,10]
- [4] - A/D encoding
- 0 = two's complement
- 1 = straight binary
- [5] - DAC 0 range
- 0 = [-10,10]
- 1 = [0,10]
- [6] - DAC 0 encoding
- 0 = two's complement
- 1 = straight binary
- [7] - DAC 1 range (same as DAC 0)
- [8] - DAC 1 encoding (same as DAC 0)
-*/
+ * Driver: rti800
+ * Description: Analog Devices RTI-800/815
+ * Devices: (Analog Devices) RTI-800 [rti800]
+ * (Analog Devices) RTI-815 [rti815]
+ * Author: David A. Schleef <ds@xxxxxxxxxxx>
+ * Status: unknown
+ * Updated: Fri, 05 Sep 2008 14:50:44 +0100
+ *
+ * Configuration options:
+ * [0] - I/O port base address
+ * [1] - IRQ (not supported / unused)
+ * [2] - A/D mux/reference (number of channels)
+ * 0 = differential
+ * 1 = pseudodifferential (common)
+ * 2 = single-ended
+ * [3] - A/D range
+ * 0 = [-10,10]
+ * 1 = [-5,5]
+ * 2 = [0,10]
+ * [4] - A/D encoding
+ * 0 = two's complement
+ * 1 = straight binary
+ * [5] - DAC 0 range
+ * 0 = [-10,10]
+ * 1 = [0,10]
+ * [6] - DAC 0 encoding
+ * 0 = two's complement
+ * 1 = straight binary
+ * [7] - DAC 1 range (same as DAC 0)
+ * [8] - DAC 1 encoding (same as DAC 0)
+ */
#include <linux/interrupt.h>
#include "../comedidev.h"
@@ -288,23 +289,6 @@ static int rti800_do_insn_bits(struct comedi_device *dev,
return insn->n;
}
-/*
- options[0] - I/O port
- options[1] - irq
- options[2] - a/d mux
- 0=differential, 1=pseudodiff, 2=single
- options[3] - a/d range
- 0=bipolar10, 1=bipolar5, 2=unipolar10
- options[4] - a/d coding
- 0=2's comp, 1=straight binary
- options[5] - dac0 range
- 0=bipolar10, 1=unipolar10
- options[6] - dac0 coding
- 0=2's comp, 1=straight binary
- options[7] - dac1 range
- options[8] - dac1 coding
- */
-
static int rti800_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct rti800_board *board = comedi_board(dev);
--
1.8.1.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
