Clean up the multi-line comments at the beginning of the file so that they follow the CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx> Cc: Ian Abbott <abbotti@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/staging/comedi/drivers/ni_labpc.c | 135 ++++++++++++++---------------- 1 file changed, 64 insertions(+), 71 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index c967bc9..94e25e7 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -1,77 +1,70 @@ /* - comedi/drivers/ni_labpc.c - Driver for National Instruments Lab-PC series boards and compatibles - Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -************************************************************************ -*/ -/* -Driver: ni_labpc -Description: National Instruments Lab-PC (& compatibles) -Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> -Devices: [National Instruments] Lab-PC-1200 (labpc-1200), - Lab-PC-1200AI (labpc-1200ai), Lab-PC+ (lab-pc+), PCI-1200 (ni_labpc) -Status: works - -Tested with lab-pc-1200. For the older Lab-PC+, not all input ranges -and analog references will work, the available ranges/arefs will -depend on how you have configured the jumpers on your board -(see your owner's manual). - -Kernel-level ISA plug-and-play support for the lab-pc-1200 -boards has not -yet been added to the driver, mainly due to the fact that -I don't know the device id numbers. If you have one -of these boards, -please file a bug report at http://comedi.org/ -so I can get the necessary information from you. - -The 1200 series boards have onboard calibration dacs for correcting -analog input/output offsets and gains. The proper settings for these -caldacs are stored on the board's eeprom. To read the caldac values -from the eeprom and store them into a file that can be then be used by -comedilib, use the comedi_calibrate program. - -Configuration options - ISA boards: - [0] - I/O port base address - [1] - IRQ (optional, required for timed or externally triggered conversions) - [2] - DMA channel (optional) - -Configuration options - PCI boards: - [0] - bus (optional) - [1] - slot (optional) - -The Lab-pc+ has quirky chanlist requirements -when scanning multiple channels. Multiple channel scan -sequence must start at highest channel, then decrement down to -channel 0. The rest of the cards can scan down like lab-pc+ or scan -up from channel zero. Chanlists consisting of all one channel -are also legal, and allow you to pace conversions in bursts. - -*/ + * comedi/drivers/ni_labpc.c + * Driver for National Instruments Lab-PC series boards and compatibles + * Copyright (C) 2001-2003 Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ /* - -NI manuals: -341309a (labpc-1200 register manual) -340914a (pci-1200) -320502b (lab-pc+) - -*/ + * Driver: ni_labpc + * Description: National Instruments Lab-PC (& compatibles) + * Devices: (National Instruments) Lab-PC-1200 [lab-pc-1200] + * (National Instruments) Lab-PC-1200AI [lab-pc-1200ai] + * (National Instruments) Lab-PC+ [lab-pc+] + * (National Instruments) PCI-1200 [pci-1200] + * Author: Frank Mori Hess <fmhess@xxxxxxxxxxxxxxxxxxxxx> + * Status: works + * + * Configuration options - ISA boards: + * [0] - I/O port base address + * [1] - IRQ (optional, required for timed or externally triggered + * conversions) + * [2] - DMA channel (optional) + * + * Configuration options - PCI boards: + * not applicable, uses PCI auto config + * + * Tested with lab-pc-1200. For the older Lab-PC+, not all input + * ranges and analog references will work, the available ranges/arefs + * will depend on how you have configured the jumpers on your board + * (see your owner's manual). + * + * Kernel-level ISA plug-and-play support for the lab-pc-1200 boards + * has not yet been added to the driver, mainly due to the fact that + * I don't know the device id numbers. If you have one of these boards, + * please file a bug report at http://comedi.org/ so I can get the + * necessary information from you. + * + * The 1200 series boards have onboard calibration dacs for correcting + * analog input/output offsets and gains. The proper settings for these + * caldacs are stored on the board's eeprom. To read the caldac values + * from the eeprom and store them into a file that can be then be used + * by comedilib, use the comedi_calibrate program. + * + * The Lab-pc+ has quirky chanlist requirements when scanning multiple + * channels. Multiple channel scan sequence must start at highest channel, + * then decrement down to channel 0. The rest of the cards can scan down + * like lab-pc+ or scan up from channel zero. Chanlists consisting of all + * one channel are also legal, and allow you to pace conversions in bursts. + * + * NI manuals: + * 341309a (labpc-1200 register manual) + * 340914a (pci-1200) + * 320502b (lab-pc+) + */ #include <linux/pci.h> #include <linux/interrupt.h> -- 1.8.1.4 _______________________________________________ devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxx http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
