Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@xxxxxxxxxx>
---
drivers/staging/sb105x/sb_pci_mp.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
index 4c88bfc..7196412 100644
--- a/drivers/staging/sb105x/sb_pci_mp.c
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -1288,26 +1288,20 @@ static void mp_close(struct tty_struct *tty, struct file *filp)
struct sb_uart_state *state = tty->driver_data;
struct sb_uart_port *port;
- printk("mp_close!\n");
if (!state || !state->port)
return;
port = state->port;
-
- printk("close1 %d\n", __LINE__);
MP_STATE_LOCK(state);
- printk("close2 %d\n", __LINE__);
if (tty_hung_up_p(filp))
goto done;
- printk("close3 %d\n", __LINE__);
if ((tty->count == 1) && (state->count != 1)) {
printk("mp_close: bad serial port count; tty->count is 1, "
"state->count is %d\n", state->count);
state->count = 1;
}
- printk("close4 %d\n", __LINE__);
if (--state->count < 0) {
printk("rs_close: bad serial port count for ttyMP%d: %d\n",
port->line, state->count);
@@ -1318,11 +1312,9 @@ static void mp_close(struct tty_struct *tty, struct file *filp)
tty->closing = 1;
- printk("close5 %d\n", __LINE__);
if (state->closing_wait != USF_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, state->closing_wait);
- printk("close6 %d\n", __LINE__);
if (state->info->flags & UIF_INITIALIZED) {
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
@@ -1330,10 +1322,8 @@ static void mp_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&port->lock, flags);
mp_wait_until_sent(tty, port->timeout);
}
- printk("close7 %d\n", __LINE__);
mp_shutdown(state);
- printk("close8 %d\n", __LINE__);
mp_flush_buffer(tty);
tty_ldisc_flush(tty);
tty->closing = 0;
@@ -1350,13 +1340,11 @@ static void mp_close(struct tty_struct *tty, struct file *filp)
{
mp_change_pm(state, 3);
}
- printk("close8 %d\n", __LINE__);
state->info->flags &= ~UIF_NORMAL_ACTIVE;
wake_up_interruptible(&state->info->open_wait);
done:
- printk("close done\n");
MP_STATE_UNLOCK(state);
module_put(THIS_MODULE);
}
@@ -1940,7 +1928,6 @@ static void autoconfig(struct mp_port *mtpt, unsigned int probeflags)
if(mtpt->port.type == PORT_UNKNOWN )
{
-printk("unknow2\n");
switch (scratch) {
case 0:
case 1:
@@ -2221,10 +2208,8 @@ static irqreturn_t multi_interrupt(int irq, void *dev_id)
mtpt = list_entry(lhead, struct mp_port, list);
iir = serial_in(mtpt, UART_IIR);
- printk("intrrupt! port %d, iir 0x%x\n", mtpt->port.line, iir); //wlee
if (!(iir & UART_IIR_NO_INT))
{
- printk("interrupt handle\n");
spin_lock(&mtpt->port.lock);
multi_handle_port(mtpt);
spin_unlock(&mtpt->port.lock);
@@ -2238,8 +2223,6 @@ static irqreturn_t multi_interrupt(int irq, void *dev_id)
{
printk(KERN_ERR "multi: too much work for "
"irq%d\n", irq);
- printk( "multi: too much work for "
- "irq%d\n", irq);
break;
}
} while (lhead != end);
@@ -2619,7 +2602,6 @@ static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *term
if(mtpt->device->device_id == PCI_DEVICE_ID_MP4M) {
SendATCommand(mtpt);
- printk("SendATCommand\n");
}
multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
@@ -3064,12 +3046,10 @@ static int __init multi_init(void)
}
- printk("MULTI INIT\n");
for( i = 0; i < mp_nrpcibrds; i++)
{
while( (dev = pci_get_device(mp_pciboards[i].vendor_id, mp_pciboards[i].device_id, dev) ) ) {
- printk("FOUND~~~\n");
// Cent OS bug fix
// if (mp_pciboards[i].device_id & 0x0800)
{
--
1.7.10.4
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
