Simple update on documentation file for DT. This patch
also adds an example for OMAP4430 and 0MAP4470, and also updated
OMAP4460's example.
Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
---
drivers/staging/omap-thermal/omap_bandgap.txt | 27 ++++++++++++++++++++++--
1 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap_bandgap.txt b/drivers/staging/omap-thermal/omap_bandgap.txt
index 6008a14..e30dc1c 100644
--- a/drivers/staging/omap-thermal/omap_bandgap.txt
+++ b/drivers/staging/omap-thermal/omap_bandgap.txt
@@ -10,21 +10,42 @@ to the silicon temperature.
Required properties:
- compatible : Should be:
- - "ti,omap4460-control-bandgap" : for OMAP4460 bandgap
- - "ti,omap5430-control-bandgap" : for OMAP5430 bandgap
+ - "ti,omap4430-bandgap" : for OMAP4430 bandgap
+ - "ti,omap4460-bandgap" : for OMAP4460 bandgap
+ - "ti,omap4470-bandgap" : for OMAP4470 bandgap
+ - "ti,omap5430-bandgap" : for OMAP5430 bandgap
- interrupts : this entry should indicate which interrupt line
the talert signal is routed to;
Specific:
- ti,tshut-gpio : this entry should be used to inform which GPIO
line the tshut signal is routed to;
+- regs : this entry must also be specified and it is specific
+to each bandgap version, because the mapping may change from
+soc to soc, apart of depending on available features.
Example:
+OMAP4430:
+bandgap {
+ reg = <0x4a002260 0x4 0x4a00232C 0x4>;
+ compatible = "ti,omap4430-bandgap";
+};
+
+OMAP4460:
+bandgap {
+ reg = <0x4a002260 0x4
+ 0x4a00232C 0x4
+ 0x4a002378 0x18>;
+ compatible = "ti,omap4460-bandgap";
+ interrupts = <0 126 4>; /* talert */
+ ti,tshut-gpio = <86>;
+};
+OMAP4470:
bandgap {
reg = <0x4a002260 0x4
0x4a00232C 0x4
0x4a002378 0x18>;
- compatible = "ti,omap4460-control-bandgap";
+ compatible = "ti,omap4470-bandgap";
interrupts = <0 126 4>; /* talert */
ti,tshut-gpio = <86>;
};
--
1.7.7.1.488.ge8e1c
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
