[PATCH 03/13] staging: comedi: adv_pci1724: use dev->iobase

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The main registers for this device are a port I/O region from PCI BAR 2
and that is the only device register region used by this driver.  The
driver has a `main_iobase` member in its private device data structure
`struct adv_pci1724_private` to hold the base address of this I/O
region, but as the `iobase` member of the `struct comedi_device` is
going spare we can use that instead.  Do so and get rid of the
`main_iobase` member from the private device data.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Frank Mori Hess <fmh6jj@xxxxxxxxx>
---
 drivers/staging/comedi/drivers/adv_pci1724.c | 29 ++++++++++------------------
 1 file changed, 10 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/comedi/drivers/adv_pci1724.c b/drivers/staging/comedi/drivers/adv_pci1724.c
index e9796f2..b89637f 100644
--- a/drivers/staging/comedi/drivers/adv_pci1724.c
+++ b/drivers/staging/comedi/drivers/adv_pci1724.c
@@ -138,7 +138,6 @@ MODULE_DEVICE_TABLE(pci, adv_pci1724_pci_table);
 
 /* this structure is for data unique to this hardware driver. */
 struct adv_pci1724_private {
-	resource_size_t main_iobase;
 	unsigned board_id; /* 4 bit number settable via dip switches on board */
 	int ao_value[NUM_AO_CHANNELS];
 	int offset_value[NUM_AO_CHANNELS];
@@ -286,10 +285,8 @@ static int adv_pci1724_auto_attach(struct comedi_device *dev,
 	if (retval)
 		return retval;
 
-	priv(dev)->main_iobase = pci_resource_start(pcidev, 2);
-
-	priv(dev)->board_id = inl(priv(dev)->main_iobase + BOARD_ID_REG) &
-			      BOARD_ID_MASK;
+	dev->iobase = pci_resource_start(pcidev, 2);
+	priv(dev)->board_id = inl(dev->iobase + BOARD_ID_REG) & BOARD_ID_MASK;
 
 	retval = setup_subdevices(dev);
 	if (retval < 0)
@@ -304,13 +301,9 @@ static void adv_pci1724_detach(struct comedi_device *dev)
 {
 	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
 
-	if (priv(dev)) {
-		if (pcidev) {
-			if (priv(dev)->main_iobase) {
-				comedi_pci_disable(pcidev);
-				dev_info(dev->class_dev, "detached\n");
-			}
-		}
+	if (pcidev && dev->iobase) {
+		comedi_pci_disable(pcidev);
+		dev_info(dev->class_dev, "detached\n");
 	}
 }
 
@@ -320,10 +313,8 @@ static int wait_for_dac_idle(struct comedi_device *dev)
 	int i;
 
 	for (i = 0; i < timeout; ++i) {
-		if ((inl(priv(dev)->main_iobase + SYNC_OUTPUT_REG) &
-		     DAC_BUSY) == 0) {
+		if ((inl(dev->iobase + SYNC_OUTPUT_REG) & DAC_BUSY) == 0)
 			break;
-		}
 		udelay(1);
 	}
 	if (i == timeout) {
@@ -346,7 +337,7 @@ static int set_dac(struct comedi_device *dev, unsigned mode, unsigned channel,
 	control_bits = mode;
 	control_bits |= dac_channel_and_group_select_bits(channel);
 	control_bits |= data & DAC_DATA_MASK;
-	outl(control_bits, priv(dev)->main_iobase + DAC_CONTROL_REG);
+	outl(control_bits, dev->iobase + DAC_CONTROL_REG);
 	return 0;
 }
 
@@ -358,7 +349,7 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 	int i;
 
 	/* turn off synchronous mode */
-	outl(0, priv(dev)->main_iobase + SYNC_OUTPUT_REG);
+	outl(0, dev->iobase + SYNC_OUTPUT_REG);
 
 	for (i = 0; i < insn->n; ++i) {
 		retval = set_dac(dev, DAC_NORMAL_MODE, channel, data[i]);
@@ -394,7 +385,7 @@ static int offset_write_insn(struct comedi_device *dev,
 	int i;
 
 	/* turn off synchronous mode */
-	outl(0, priv(dev)->main_iobase + SYNC_OUTPUT_REG);
+	outl(0, dev->iobase + SYNC_OUTPUT_REG);
 
 	for (i = 0; i < insn->n; ++i) {
 		retval = set_dac(dev, DAC_OFFSET_MODE, channel, data[i]);
@@ -431,7 +422,7 @@ static int gain_write_insn(struct comedi_device *dev,
 	int i;
 
 	/* turn off synchronous mode */
-	outl(0, priv(dev)->main_iobase + SYNC_OUTPUT_REG);
+	outl(0, dev->iobase + SYNC_OUTPUT_REG);
 
 	for (i = 0; i < insn->n; ++i) {
 		retval = set_dac(dev, DAC_GAIN_MODE, channel, data[i]);
-- 
1.8.1.2

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux