The normal way of presenting the board specific information in comedi
drivers is store the data in a static const array. This data is then
accessed using a pointer, normally the comedi_device 'board_ptr',
Move the boardinfo for the two boards supported by this driver from
the vmk80xx_usb_probe() function into a static const array.
Change the access of this information so a pointer is used.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/vmk80xx.c | 152 ++++++++++++++++---------------
1 file changed, 77 insertions(+), 75 deletions(-)
diff --git a/drivers/staging/comedi/drivers/vmk80xx.c b/drivers/staging/comedi/drivers/vmk80xx.c
index 448c11e..dc2efc0 100644
--- a/drivers/staging/comedi/drivers/vmk80xx.c
+++ b/drivers/staging/comedi/drivers/vmk80xx.c
@@ -173,6 +173,43 @@ struct vmk80xx_board {
__le16 pwm_bits;
};
+static const struct vmk80xx_board vmk80xx_boardinfo[] = {
+ [DEVICE_VMK8055] = {
+ .name = "K8055 (VM110)",
+ .model = VMK8055_MODEL,
+ .range = &vmk8055_range,
+ .ai_chans = 2,
+ .ai_bits = 8,
+ .ao_chans = 2,
+ .ao_bits = 8,
+ .di_chans = 6,
+ .di_bits = 1,
+ .do_chans = 8,
+ .do_bits = 1,
+ .cnt_chans = 2,
+ .cnt_bits = 16,
+ .pwm_chans = 0,
+ .pwm_bits = 0,
+ },
+ [DEVICE_VMK8061] = {
+ .name = "K8061 (VM140)",
+ .model = VMK8061_MODEL,
+ .range = &vmk8061_range,
+ .ai_chans = 8,
+ .ai_bits = 10,
+ .ao_chans = 8,
+ .ao_bits = 8,
+ .di_chans = 8,
+ .di_bits = 1,
+ .do_chans = 8,
+ .do_bits = 1,
+ .cnt_chans = 2,
+ .cnt_bits = 0,
+ .pwm_chans = 1,
+ .pwm_bits = 10,
+ },
+};
+
enum {
VMK80XX_SUBD_AI,
VMK80XX_SUBD_AO,
@@ -189,7 +226,7 @@ struct vmk80xx_usb {
struct usb_endpoint_descriptor *ep_tx;
struct usb_anchor rx_anchor;
struct usb_anchor tx_anchor;
- struct vmk80xx_board board;
+ const struct vmk80xx_board *board;
struct firmware_version fw;
struct semaphore limit_sem;
wait_queue_head_t read_wait;
@@ -421,7 +458,7 @@ static int vmk80xx_read_packet(struct vmk80xx_usb *dev)
&dev->flags)))
return -ERESTART;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
vmk80xx_do_bulk_msg(dev);
return 0;
@@ -466,7 +503,7 @@ static int vmk80xx_write_packet(struct vmk80xx_usb *dev, int cmd)
&dev->flags)))
return -ERESTART;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
dev->usb_tx_buf[0] = cmd;
vmk80xx_do_bulk_msg(dev);
@@ -538,7 +575,7 @@ static int vmk80xx_ai_rinsn(struct comedi_device *cdev,
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
- switch (dev->board.model) {
+ switch (dev->board->model) {
case VMK8055_MODEL:
if (!chan)
reg[0] = VMK8055_AI1_REG;
@@ -558,7 +595,7 @@ static int vmk80xx_ai_rinsn(struct comedi_device *cdev,
if (vmk80xx_read_packet(dev))
break;
- if (dev->board.model == VMK8055_MODEL) {
+ if (dev->board->model == VMK8055_MODEL) {
data[n] = dev->usb_rx_buf[reg[0]];
continue;
}
@@ -590,7 +627,7 @@ static int vmk80xx_ao_winsn(struct comedi_device *cdev,
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
- switch (dev->board.model) {
+ switch (dev->board->model) {
case VMK8055_MODEL:
cmd = VMK8055_CMD_WRT_AD;
if (!chan)
@@ -666,7 +703,7 @@ static int vmk80xx_di_bits(struct comedi_device *cdev,
rx_buf = dev->usb_rx_buf;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
reg = VMK8061_DI_REG;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_DI;
} else {
@@ -676,7 +713,7 @@ static int vmk80xx_di_bits(struct comedi_device *cdev,
retval = vmk80xx_read_packet(dev);
if (!retval) {
- if (dev->board.model == VMK8055_MODEL)
+ if (dev->board->model == VMK8055_MODEL)
data[1] = (((rx_buf[reg] >> 4) & 0x03) |
((rx_buf[reg] << 2) & 0x04) |
((rx_buf[reg] >> 3) & 0x18));
@@ -711,7 +748,7 @@ static int vmk80xx_di_rinsn(struct comedi_device *cdev,
rx_buf = dev->usb_rx_buf;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
reg = VMK8061_DI_REG;
dev->usb_tx_buf[0] = VMK8061_CMD_RD_DI;
} else {
@@ -721,7 +758,7 @@ static int vmk80xx_di_rinsn(struct comedi_device *cdev,
if (vmk80xx_read_packet(dev))
break;
- if (dev->board.model == VMK8055_MODEL)
+ if (dev->board->model == VMK8055_MODEL)
inp = (((rx_buf[reg] >> 4) & 0x03) |
((rx_buf[reg] << 2) & 0x04) |
((rx_buf[reg] >> 3) & 0x18));
@@ -757,7 +794,7 @@ static int vmk80xx_do_winsn(struct comedi_device *cdev,
tx_buf = dev->usb_tx_buf;
for (n = 0; n < insn->n; n++) {
- if (dev->board.model == VMK8055_MODEL) {
+ if (dev->board->model == VMK8055_MODEL) {
reg = VMK8055_DO_REG;
cmd = VMK8055_CMD_WRT_AD;
if (data[n] == 1)
@@ -830,7 +867,7 @@ static int vmk80xx_do_bits(struct comedi_device *cdev,
if (data[0])
dir |= DIR_OUT;
- if (dev->board.model == VMK8061_MODEL)
+ if (dev->board->model == VMK8061_MODEL)
dir |= DIR_IN;
retval = rudimentary_check(dev, dir);
@@ -843,7 +880,7 @@ static int vmk80xx_do_bits(struct comedi_device *cdev,
tx_buf = dev->usb_tx_buf;
if (data[0]) {
- if (dev->board.model == VMK8055_MODEL) {
+ if (dev->board->model == VMK8055_MODEL) {
reg = VMK8055_DO_REG;
cmd = VMK8055_CMD_WRT_AD;
} else { /* VMK8061_MODEL */
@@ -860,7 +897,7 @@ static int vmk80xx_do_bits(struct comedi_device *cdev,
goto out;
}
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
reg = VMK8061_DO_REG;
tx_buf[0] = VMK8061_CMD_RD_DO;
@@ -897,7 +934,7 @@ static int vmk80xx_cnt_rinsn(struct comedi_device *cdev,
down(&dev->limit_sem);
chan = CR_CHAN(insn->chanspec);
- switch (dev->board.model) {
+ switch (dev->board->model) {
case VMK8055_MODEL:
if (!chan)
reg[0] = VMK8055_CNT1_REG;
@@ -916,7 +953,7 @@ static int vmk80xx_cnt_rinsn(struct comedi_device *cdev,
if (vmk80xx_read_packet(dev))
break;
- if (dev->board.model == VMK8055_MODEL)
+ if (dev->board->model == VMK8055_MODEL)
data[n] = dev->usb_rx_buf[reg[0]];
else /* VMK8061_MODEL */
data[n] = dev->usb_rx_buf[reg[0] * (chan + 1) + 1]
@@ -951,7 +988,7 @@ static int vmk80xx_cnt_cinsn(struct comedi_device *cdev,
chan = CR_CHAN(insn->chanspec);
- if (dev->board.model == VMK8055_MODEL) {
+ if (dev->board->model == VMK8055_MODEL) {
if (!chan) {
cmd = VMK8055_CMD_RST_CNT1;
reg = VMK8055_CNT1_REG;
@@ -1109,9 +1146,9 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
int ret;
down(&dev->limit_sem);
- cdev->board_name = dev->board.name;
+ cdev->board_name = dev->board->name;
cdev->private = dev;
- if (dev->board.model == VMK8055_MODEL)
+ if (dev->board->model == VMK8055_MODEL)
n_subd = 5;
else
n_subd = 6;
@@ -1124,19 +1161,19 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
s = &cdev->subdevices[VMK80XX_SUBD_AI];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = dev->board.ai_chans;
- s->maxdata = (1 << dev->board.ai_bits) - 1;
- s->range_table = dev->board.range;
+ s->n_chan = dev->board->ai_chans;
+ s->maxdata = (1 << dev->board->ai_bits) - 1;
+ s->range_table = dev->board->range;
s->insn_read = vmk80xx_ai_rinsn;
/* Analog output subdevice */
s = &cdev->subdevices[VMK80XX_SUBD_AO];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
- s->n_chan = dev->board.ao_chans;
- s->maxdata = (1 << dev->board.ao_bits) - 1;
- s->range_table = dev->board.range;
+ s->n_chan = dev->board->ao_chans;
+ s->maxdata = (1 << dev->board->ao_bits) - 1;
+ s->range_table = dev->board->range;
s->insn_write = vmk80xx_ao_winsn;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
s->subdev_flags |= SDF_READABLE;
s->insn_read = vmk80xx_ao_rinsn;
}
@@ -1144,7 +1181,7 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
s = &cdev->subdevices[VMK80XX_SUBD_DI];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
- s->n_chan = dev->board.di_chans;
+ s->n_chan = dev->board->di_chans;
s->maxdata = 1;
s->insn_read = vmk80xx_di_rinsn;
s->insn_bits = vmk80xx_di_bits;
@@ -1152,11 +1189,11 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
s = &cdev->subdevices[VMK80XX_SUBD_DO];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND;
- s->n_chan = dev->board.do_chans;
+ s->n_chan = dev->board->do_chans;
s->maxdata = 1;
s->insn_write = vmk80xx_do_winsn;
s->insn_bits = vmk80xx_do_bits;
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
s->subdev_flags |= SDF_READABLE;
s->insn_read = vmk80xx_do_rinsn;
}
@@ -1164,27 +1201,27 @@ static int vmk80xx_attach_common(struct comedi_device *cdev,
s = &cdev->subdevices[VMK80XX_SUBD_CNT];
s->type = COMEDI_SUBD_COUNTER;
s->subdev_flags = SDF_READABLE;
- s->n_chan = dev->board.cnt_chans;
+ s->n_chan = dev->board->cnt_chans;
s->insn_read = vmk80xx_cnt_rinsn;
s->insn_config = vmk80xx_cnt_cinsn;
- if (dev->board.model == VMK8055_MODEL) {
+ if (dev->board->model == VMK8055_MODEL) {
s->subdev_flags |= SDF_WRITEABLE;
- s->maxdata = (1 << dev->board.cnt_bits) - 1;
+ s->maxdata = (1 << dev->board->cnt_bits) - 1;
s->insn_write = vmk80xx_cnt_winsn;
}
/* PWM subdevice */
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
s = &cdev->subdevices[VMK80XX_SUBD_PWM];
s->type = COMEDI_SUBD_PWM;
s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
- s->n_chan = dev->board.pwm_chans;
- s->maxdata = (1 << dev->board.pwm_bits) - 1;
+ s->n_chan = dev->board->pwm_chans;
+ s->maxdata = (1 << dev->board->pwm_bits) - 1;
s->insn_read = vmk80xx_pwm_rinsn;
s->insn_write = vmk80xx_pwm_winsn;
}
dev->attached = 1;
dev_info(cdev->class_dev, "vmk80xx: board #%d [%s] attached\n",
- dev->count, dev->board.name);
+ dev->count, dev->board->name);
up(&dev->limit_sem);
return 0;
}
@@ -1326,44 +1363,9 @@ static int vmk80xx_usb_probe(struct usb_interface *intf,
usb_set_intfdata(intf, dev);
- switch (id->driver_info) {
- case DEVICE_VMK8055:
- dev->board.name = "K8055 (VM110)";
- dev->board.model = VMK8055_MODEL;
- dev->board.range = &vmk8055_range;
- dev->board.ai_chans = 2;
- dev->board.ai_bits = 8;
- dev->board.ao_chans = 2;
- dev->board.ao_bits = 8;
- dev->board.di_chans = 5;
- dev->board.di_bits = 1;
- dev->board.do_chans = 8;
- dev->board.do_bits = 1;
- dev->board.cnt_chans = 2;
- dev->board.cnt_bits = 16;
- dev->board.pwm_chans = 0;
- dev->board.pwm_bits = 0;
- break;
- case DEVICE_VMK8061:
- dev->board.name = "K8061 (VM140)";
- dev->board.model = VMK8061_MODEL;
- dev->board.range = &vmk8061_range;
- dev->board.ai_chans = 8;
- dev->board.ai_bits = 10;
- dev->board.ao_chans = 8;
- dev->board.ao_bits = 8;
- dev->board.di_chans = 8;
- dev->board.di_bits = 1;
- dev->board.do_chans = 8;
- dev->board.do_bits = 1;
- dev->board.cnt_chans = 2;
- dev->board.cnt_bits = 0;
- dev->board.pwm_chans = 1;
- dev->board.pwm_bits = 10;
- break;
- }
+ dev->board = &vmk80xx_boardinfo[id->driver_info];
- if (dev->board.model == VMK8061_MODEL) {
+ if (dev->board->model == VMK8061_MODEL) {
vmk80xx_read_eeprom(dev, IC3_VERSION);
dev_info(&intf->dev, "%s\n", dev->fw.ic3_vers);
@@ -1375,13 +1377,13 @@ static int vmk80xx_usb_probe(struct usb_interface *intf,
}
}
- if (dev->board.model == VMK8055_MODEL)
+ if (dev->board->model == VMK8055_MODEL)
vmk80xx_reset_device(dev);
dev->probed = 1;
dev_info(&intf->dev, "board #%d [%s] now attached\n",
- dev->count, dev->board.name);
+ dev->count, dev->board->name);
mutex_unlock(&glb_mutex);
--
1.8.1.1.293.gfe73786
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
