For aesthetic reasons, reformat the boardinfo declaration and
add some whitespace. Remove all the information that is set to
'0' as this is the default.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_labpc_cs.c | 48 ++++++++++++----------------
1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 6c6ca40..334fa78 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -79,33 +79,27 @@ static struct pcmcia_device *pcmcia_cur_dev;
static const struct labpc_board_struct labpc_cs_boards[] = {
{
- .name = "daqcard-1200",
- .device_id = 0x103, /* 0x10b is manufacturer id,
- 0x103 is device id */
- .ai_speed = 10000,
- .bustype = pcmcia_bustype,
- .register_layout = labpc_1200_layout,
- .has_ao = 1,
- .ai_range_table = &range_labpc_1200_ai,
- .ai_range_code = labpc_1200_ai_gain_bits,
- .ai_range_is_unipolar = labpc_1200_is_unipolar,
- .ai_scan_up = 0,
- .memory_mapped_io = 0,
- },
- /* duplicate entry, to support using alternate name */
- {
- .name = "ni_labpc_cs",
- .device_id = 0x103,
- .ai_speed = 10000,
- .bustype = pcmcia_bustype,
- .register_layout = labpc_1200_layout,
- .has_ao = 1,
- .ai_range_table = &range_labpc_1200_ai,
- .ai_range_code = labpc_1200_ai_gain_bits,
- .ai_range_is_unipolar = labpc_1200_is_unipolar,
- .ai_scan_up = 0,
- .memory_mapped_io = 0,
- },
+ .name = "daqcard-1200",
+ .device_id = 0x103,
+ .ai_speed = 10000,
+ .bustype = pcmcia_bustype,
+ .register_layout = labpc_1200_layout,
+ .has_ao = 1,
+ .ai_range_table = &range_labpc_1200_ai,
+ .ai_range_code = labpc_1200_ai_gain_bits,
+ .ai_range_is_unipolar = labpc_1200_is_unipolar,
+ }, {
+ /* duplicate entry, to support using alternate name */
+ .name = "ni_labpc_cs",
+ .device_id = 0x103,
+ .ai_speed = 10000,
+ .bustype = pcmcia_bustype,
+ .register_layout = labpc_1200_layout,
+ .has_ao = 1,
+ .ai_range_table = &range_labpc_1200_ai,
+ .ai_range_code = labpc_1200_ai_gain_bits,
+ .ai_range_is_unipolar = labpc_1200_is_unipolar,
+ },
};
static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
--
1.8.0.2
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
