From: Borislav Petkov <bp@xxxxxxx>
Put all config options needed to run Linux as a guest behind a
CONFIG_HYPERVISOR_GUEST menu so that they don't get built-in by
default but selected by the user. Also, move x86_hyper into an
unconditionally-built compilation unit because it is exported with the
non-GPL flavour and we can't know whatever uses it on the outside.
Then, make sure x86 hypervisor platform descriptor is present and do a
proper check whether we're running on a vmware hypervisor by looking at
its name before continuing with the initialization further.
While at it, adjust text to changes, remove redundant select.
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Cc: Dmitry Torokhov <dtor@xxxxxxxxxx>
Cc: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Cc: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
Cc: devel@xxxxxxxxxxxxxxxxxxxxxx
---
arch/x86/Kconfig | 21 +++++++++++----------
arch/x86/include/asm/hypervisor.h | 12 ++++++++----
arch/x86/kernel/cpu/Makefile | 3 ++-
arch/x86/kernel/cpu/hypervisor.c | 3 ---
arch/x86/kernel/setup.c | 4 +++-
drivers/hv/vmbus_drv.c | 2 +-
drivers/misc/vmw_balloon.c | 2 +-
7 files changed, 26 insertions(+), 21 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 201b8aa93f8f..2380a52f0c8c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -379,7 +379,7 @@ config X86_NUMACHIP
config X86_VSMP
bool "ScaleMP vSMP"
- select PARAVIRT_GUEST
+ select HYPERVISOR_GUEST
select PARAVIRT
depends on X86_64 && PCI
depends on X86_EXTENDED_PLATFORM
@@ -568,15 +568,17 @@ config SCHED_OMIT_FRAME_POINTER
If in doubt, say "Y".
-menuconfig PARAVIRT_GUEST
- bool "Paravirtualized guest support"
+menuconfig HYPERVISOR_GUEST
+ bool "Linux guest support"
---help---
- Say Y here to get to see options related to running Linux under
- various hypervisors. This option alone does not add any kernel code.
+ Say Y here to enable options for running Linux under various hyper-
+ visors. This option enables basic hypervisor detection and platform
+ setup.
- If you say N, all options in this submenu will be skipped and disabled.
+ If you say N, all options in this submenu will be skipped and
+ disabled, and Linux guest support won't be built in.
-if PARAVIRT_GUEST
+if HYPERVISOR_GUEST
config PARAVIRT_TIME_ACCOUNTING
bool "Paravirtual steal time accounting"
@@ -595,9 +597,8 @@ source "arch/x86/xen/Kconfig"
config KVM_GUEST
bool "KVM Guest support (including kvmclock)"
select PARAVIRT
- select PARAVIRT
select PARAVIRT_CLOCK
- default y if PARAVIRT_GUEST
+ default y
---help---
This option enables various optimizations for running under the KVM
hypervisor. It includes a paravirtualized clock, so that instead
@@ -638,7 +639,7 @@ config PARAVIRT_DEBUG
Enable to debug paravirt_ops internals. Specifically, BUG if
a paravirt_op is missing when it is called.
-endif #PARAVIRT_GUEST
+endif #HYPERVISOR_GUEST
config NO_BOOTMEM
def_bool y
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index b518c7509933..cd06ed8733cb 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -23,9 +23,6 @@
#include <asm/kvm_para.h>
#include <asm/xen/hypervisor.h>
-extern void init_hypervisor(struct cpuinfo_x86 *c);
-extern void init_hypervisor_platform(void);
-
/*
* x86 hypervisor information
*/
@@ -60,4 +57,11 @@ static inline bool hypervisor_x2apic_available(void)
return false;
}
-#endif
+#ifdef CONFIG_PARAVIRT
+extern void init_hypervisor(struct cpuinfo_x86 *c);
+extern void init_hypervisor_platform(void);
+#else
+static inline void init_hypervisor(struct cpuinfo_x86 *c) { }
+static inline void init_hypervisor_platform(void) { }
+#endif /* CONFIG_PARAVIRT */
+#endif /* _ASM_X86_HYPERVISOR_H */
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index a0e067d3d96c..8d04c7cd7cd3 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -14,7 +14,6 @@ CFLAGS_common.o := $(nostackp)
obj-y := intel_cacheinfo.o scattered.o topology.o
obj-y += proc.o capflags.o powerflags.o common.o
-obj-y += vmware.o hypervisor.o mshyperv.o
obj-y += rdrand.o
obj-y += match.o
@@ -42,6 +41,8 @@ obj-$(CONFIG_MTRR) += mtrr/
obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o perf_event_amd_ibs.o
+obj-$(CONFIG_PARAVIRT) += vmware.o hypervisor.o mshyperv.o
+
quiet_cmd_mkcapflags = MKCAP $@
cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index a8f8fa9769d6..fd6e77f6765e 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -42,9 +42,6 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] =
#endif
};
-const struct hypervisor_x86 *x86_hyper;
-EXPORT_SYMBOL(x86_hyper);
-
static inline void __init
detect_hypervisor_vendor(void)
{
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 00f6c1472b85..bdf61408e1af 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -127,7 +127,6 @@ unsigned long max_pfn_mapped;
RESERVE_BRK(dmi_alloc, 65536);
#endif
-
static __initdata unsigned long _brk_start = (unsigned long)__brk_base;
unsigned long _brk_end = (unsigned long)__brk_base;
@@ -145,6 +144,9 @@ int default_check_phys_apicid_present(int phys_apicid)
struct boot_params boot_params;
+const struct hypervisor_x86 *x86_hyper;
+EXPORT_SYMBOL(x86_hyper);
+
/*
* Machine setup..
*/
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 8e1a9ec53003..cb467656e684 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -724,7 +724,7 @@ static int __init hv_acpi_init(void)
{
int ret, t;
- if (x86_hyper != &x86_hyper_ms_hyperv)
+ if (!x86_hyper || strncmp(x86_hyper->name, "VMware", 6))
return -ENODEV;
init_completion(&probe_event);
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index cb56e270da11..85f15a6d8798 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -786,7 +786,7 @@ static int __init vmballoon_init(void)
* Check if we are running on VMware's hypervisor and bail out
* if we are not.
*/
- if (x86_hyper != &x86_hyper_vmware)
+ if (!x86_hyper || strncmp(x86_hyper->name, "VMware", 6))
return -ENODEV;
INIT_LIST_HEAD(&balloon.pages);
--
1.8.1.rc3
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
