This driver needs to read the on-board eeprom to determine the
number of analog output channels (4 or 8) on the board. But,
sinde we know the board has an eeprom and the PCI controller
chip is an AMCC S5933, we can simplify the code and remove the
code that sets the extra wait state neede for the AMCC S5920.
Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/addi_apci_3501.c | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index 3c82596..0c57d70 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -173,7 +173,6 @@ static int apci3501_auto_attach(struct comedi_device *dev,
struct addi_private *devpriv;
struct comedi_subdevice *s;
int ret, n_subdevices;
- unsigned int dw_Dummy;
this_board = addi_find_boardinfo(dev, pcidev);
if (!this_board)
@@ -224,22 +223,7 @@ static int apci3501_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
- /* Read eepeom and fill addi_board Structure */
-
- if (this_board->i_PCIEeprom) {
- if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
- /* Set 3 wait stait */
- if (!(strcmp(dev->board_name, "apci035")))
- outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
- else
- outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
-
- /* Enable the interrupt for the controller */
- dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
- outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
- }
- addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
- }
+ addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
n_subdevices = 7;
ret = comedi_alloc_subdevices(dev, n_subdevices);
--
1.8.1.1.293.gfe73786
_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel
