[PATCH v2 14/23] staging: comedi: addi_apci_2200: cleanup digital output subdevice

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The board supported by this driver always has a digital output subdevice.
Remove the boardinfo for it and just open-code the relevant data in the
subdevice init.

Remove the SDF_GROUND and SDF_COMMON from the subdevice 'subdev_flags'.
These flags only have meaning for analog input/output subdevices. Also,
remove the SDF_READABLE flag, it is not required by output only subdevices.

Remove the subdevice 'len_chanlist' initialization. This variable only
has meaning for subdevices that support asynchronous commands.

Remove the subdevice 'io_bits' initialization. Digital output subdevices
don't use this variable.

Remove the subdevice function pointers that evaluate to NULL based on the
boardinfo data.

Move the apci2200_do_insn_bits() function from the hwdrv_apci2200.c file
into the main driver file.

For aesthetic reasons, rename the #define used for the register used to
read/write the digital outputs..

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 .../comedi/drivers/addi-data/hwdrv_apci2200.c      | 27 ------------
 drivers/staging/comedi/drivers/addi_apci_2200.c    | 50 +++++++++++++---------
 2 files changed, 29 insertions(+), 48 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
index f9784e9..4d32509 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2200.c
@@ -46,12 +46,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
   +----------+-----------+------------------------------------------------+
 */
 
-/*********      Definitions for APCI-2200 card  *****/
-
-/* DIGITAL INPUT-OUTPUT DEFINE */
-
-#define APCI2200_DIGITAL_OP		4
-
 /* TIMER COUNTER WATCHDOG DEFINES */
 
 #define APCI2200_WATCHDOG		0x08
@@ -59,27 +53,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #define APCI2200_WATCHDOG_RELOAD_VALUE	4
 #define APCI2200_WATCHDOG_STATUS	16
 
-static int apci2200_do_insn_bits(struct comedi_device *dev,
-				 struct comedi_subdevice *s,
-				 struct comedi_insn *insn,
-				 unsigned int *data)
-{
-	unsigned int mask = data[0];
-	unsigned int bits = data[1];
-
-	s->state = inw(dev->iobase + APCI2200_DIGITAL_OP);
-	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
-		outw(s->state, dev->iobase + APCI2200_DIGITAL_OP);
-	}
-
-	data[1] = s->state;
-
-	return insn->n;
-}
-
 /*
 +----------------------------------------------------------------------------+
 | Function   Name   : int i_APCI2200_ConfigWatchdog(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index 3db402c..15a84e5 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -9,15 +9,14 @@
  * I/O Register Map
  */
 #define APCI2200_DI_REG			0x00
+#define APCI2200_DO_REG			0x04
 
 static const struct addi_board apci2200_boardtypes[] = {
 	{
 		.pc_DriverName		= "apci2200",
 		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
 		.i_DeviceId		= 0x1005,
-		.i_NbrDoChannel		= 16,
 		.i_Timer		= 1,
-		.do_bits		= apci2200_do_insn_bits,
 		.timer_config		= i_APCI2200_ConfigWatchdog,
 		.timer_write		= i_APCI2200_StartStopWriteWatchdog,
 		.timer_read		= i_APCI2200_ReadWatchdog,
@@ -34,9 +33,30 @@ static int apci2200_di_insn_bits(struct comedi_device *dev,
 	return insn->n;
 }
 
+static int apci2200_do_insn_bits(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 struct comedi_insn *insn,
+				 unsigned int *data)
+{
+	unsigned int mask = data[0];
+	unsigned int bits = data[1];
+
+	s->state = inw(dev->iobase + APCI2200_DO_REG);
+	if (mask) {
+		s->state &= ~mask;
+		s->state |= (bits & mask);
+
+		outw(s->state, dev->iobase + APCI2200_DO_REG);
+	}
+
+	data[1] = s->state;
+
+	return insn->n;
+}
+
 static int apci2200_reset(struct comedi_device *dev)
 {
-	outw(0x0, dev->iobase + APCI2200_DIGITAL_OP);
+	outw(0x0, dev->iobase + APCI2200_DO_REG);
 	outw(0x0, dev->iobase + APCI2200_WATCHDOG +
 			APCI2200_WATCHDOG_ENABLEDISABLE);
 	outw(0x0, dev->iobase + APCI2200_WATCHDOG +
@@ -114,24 +134,12 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];
-	if (this_board->i_NbrDoChannel) {
-		s->type = COMEDI_SUBD_DO;
-		s->subdev_flags =
-			SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = this_board->i_NbrDoChannel;
-		s->maxdata = this_board->i_DoMaxdata;
-		s->len_chanlist = this_board->i_NbrDoChannel;
-		s->range_table = &range_digital;
-		s->io_bits = 0xf;	/* all bits output */
-
-		/* insn_config - for digital output memory */
-		s->insn_config = this_board->do_config;
-		s->insn_write = this_board->do_write;
-		s->insn_bits = this_board->do_bits;
-		s->insn_read = this_board->do_read;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
+	s->type		= COMEDI_SUBD_DO;
+	s->subdev_flags	= SDF_WRITEABLE;
+	s->n_chan	= 16;
+	s->maxdata	= 1;
+	s->range_table	= &range_digital;
+	s->insn_bits	= apci2200_do_insn_bits;
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[4];
-- 
1.8.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel


[Index of Archives]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux