[PATCH v2 11/23] staging: comedi: addi_apci_2200: remove use of devpriv->s_EeParameters

[H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>]

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing it through devpriv->s_EeParameters.

Signed-off-by: H Hartley Sweeten <hsweeten@xxxxxxxxxxxxxxxxxxx>
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/staging/comedi/drivers/addi_apci_2200.c | 33 ++++++-------------------
 1 file changed, 8 insertions(+), 25 deletions(-)

diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index 490870b..cc0111c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -86,21 +86,6 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	dev->iobase = pci_resource_start(pcidev, 1);
 
-	/* Initialize parameters that can be overridden in EEPROM */
-	devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
-	devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
-	devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
-	devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
-	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
-	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
-	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
-	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
-	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
-		this_board->ui_MinAcquisitiontimeNs;
-	devpriv->s_EeParameters.ui_MinDelaytimeNs =
-		this_board->ui_MinDelaytimeNs;
-
 	/* ## */
 
 	if (pcidev->irq > 0) {
@@ -125,13 +110,12 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DI Subdevice Structures */
 	s = &dev->subdevices[2];
-	if (devpriv->s_EeParameters.i_NbrDiChannel) {
+	if (this_board->i_NbrDiChannel) {
 		s->type = COMEDI_SUBD_DI;
 		s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+		s->n_chan = this_board->i_NbrDiChannel;
 		s->maxdata = 1;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDiChannel;
+		s->len_chanlist = this_board->i_NbrDiChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0;	/* all bits input */
 		s->insn_config = this_board->di_config;
@@ -143,14 +127,13 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 	}
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];
-	if (devpriv->s_EeParameters.i_NbrDoChannel) {
+	if (this_board->i_NbrDoChannel) {
 		s->type = COMEDI_SUBD_DO;
 		s->subdev_flags =
 			SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
-		s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDoChannel;
+		s->n_chan = this_board->i_NbrDoChannel;
+		s->maxdata = this_board->i_DoMaxdata;
+		s->len_chanlist = this_board->i_NbrDoChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0xf;	/* all bits output */
 
@@ -165,7 +148,7 @@ static int apci2200_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[4];
-	if (devpriv->s_EeParameters.i_Timer) {
+	if (this_board->i_Timer) {
 		s->type = COMEDI_SUBD_TIMER;
 		s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan = 1;
-- 
1.8.0

_______________________________________________
devel mailing list
devel@xxxxxxxxxxxxxxxxxxxxxx
http://driverdev.linuxdriverproject.org/mailman/listinfo/devel